600E Pro to FBL??

[Stevendavis]

I have a buddies 600E Pro to fix and he wants me to convert it to FBL. What parts do I need to tackle this particular heli? I'd like to use the older style head, (H60H003XX) but am having trouble finding it in stock. What main shaft do I need for the DFC, or the controle arm style head? Will the stock grips work with the DFC arms? Thanks.

[RC/DC_5000]

The head assembly that you referenced is actually "new" and called the FL head. It has the lowered COG like DFC but has the swash follower design from old.

Anyway, this is copied and pasted from Align's reference material for the FL head. These are the parts you need to use with it.

●Must with 600 Main Shaft Set(H55006)、600PRO Metal Main Rotor Holder(H60204)、600 Feathering Shaft(H60H001XXW) or (H60006)

http://www.aligntrexstore.com/600FL-...XX_p_2900.html

[satgod]

dont forget you will also need a fbl controller

[Stevendavis]

Thanks for the help. I'll get those part numbers. Align seems to be popping out differant designs lately.

[Island Heli]

I have just fitted this head to my 600 pro dfc and noticed that the pom dfc dampers are included in the kit. Are people using these dampers or are you fitting rubber dampers?...
Regards Adrian

[Heli.Maniac]

I used the POM dampeners on the new FL head. It provides a more rigid and precise feel that I like but it is not suitable for low headspeeds. Either way though, lower headspeeds on the 600 suffer from bad tail performance anyways. From 2200rpm and up though, the hard dampeners work great. If you fly 3D with lots of stops and tic tocs I think you will like them on the new head.

[Island Heli]

Thanks for the reply. I have fitted the pom dampers and will see how i get on...