Goblin helicopters technical support thread

[ola.c]

Originally Posted by goblinhelicopter

for now, Goblin 630 is different in:

boom
tail belts
tail pulley
damper

for now, Goblin 770 is different in:

boom
tail belts
tail pulley
main shaft
damper

The Goblin 700 production will be very similar to the picture attached.

Goblin helicopters.

Here you go

[ste_23_66]

Originally Posted by OICU812

Unless I missed it...

With the batches that HD is getting "WHAT" is the first run of Goblins color scheme going to be?????

Hi,

https://www.helifreak.com/showpost.p...8&postcount=44

[Mr. Ben]

Goblin Tech support....
What is the width of the belts? Are they HTD?

1st stage belt
tail belt

Thanks,
Ben

[McCollister911]

Has the frame thickness been posted. Forgive me if I missed it but it has to be stout to live up to the claims of recommended motors

[goblinhelicopter]

Originally Posted by Mr. Ben

Goblin Tech support....
What is the width of the belts? Are they HTD?

1st stage belt
tail belt

Thanks,
Ben

Sorry, but still we do not want to publish this information. (a lot of competition)

I can say that the belts are Gates, but are not HTD.

[Impunitus]

Originally Posted by Mr. Ben

Goblin Tech support....
What is the width of the belts? Are they HTD?

1st stage belt
tail belt

Thanks,
Ben

From the pictures published so far, I'd say if the vertical fin is 2 mm CF, then the tail belt is 4 mm wide. And it that is so, the 1st stage would be 6 mm (again, judging from the pics). Then again, it was a pre-production and there is certainly enough room for 5 mm tail and 8 mm first stage. I guess we'll have to wait and see.

Cheers,
Rok

[goblinhelicopter]

Originally Posted by Impunitus

From the pictures published so far, I'd say if the vertical fin is 2 mm CF, then the tail belt is 4 mm wide. And it that is so, the 1st stage would be 6 mm (again, judging from the pics). Then again, it was a pre-production and there is certainly enough room for 5 mm tail and 8 mm first stage. I guess we'll have to wait and see.

Cheers,
Rok

your hypothesis is incorrect:

Thickness Vertical Fin: 2.5 mm
Motor Belt is 9 mm wide
Tail belt is 6 mm wide

[Impunitus]

Originally Posted by goblinhelicopter

your hypothesis is incorrect:

Thickness Vertical Fin: 2.5 mm
Motor Belt is 9 mm wide
Tail belt is 6 mm wide

Excellent! Thank you for this. See, it wasn't so hard, was it?

Cheers,
Rok

P.S.
2.5 mm CF thickness? Very nice.

[McCollister911]

Pinion have a 6 or 8 mm bore?

[goblinhelicopter]

Originally Posted by McCollister911

Pinion have a 6 or 8 mm bore?

Yes, thickness is 2.5 mm.

The pignons have a hole of 6 mm.

[Inverse]

It is awesome to have you guys here, thank you for taking the time to keep us informed and answer our questions.

[Mystic3D]

Originally Posted by Inverse

It is awesome to have you guys here, thank you for taking the time to keep us informed and answer our questions.

+1 Removes doubt/speculation. Makes my decision to preorder stand firm as know you guys are here.


Sent from my iPhone using Tapatalk

[jhheli]

Originally Posted by In_to_the_Mystic_2003

+1 Removes doubt/speculation. Makes my decision to preorder stand firm as know you guys are here.


Sent from my iPhone using Tapatalk

+1

[Colonny5]

Looking at the location for mounting the fbl unit, will a Skookum sk720 fit there? It looks like it may be a difficult location to get to for connecting to the pc. Or is there an alternate location?

[Colonny5]

Did I miss something in regards to mounting locations for the fbl unit? We have seen the mounting of a full size vbar but how about the other units like beastx, Skookum, or even a mini vbar? Will they fit on the back area were the tail is secured to the helicopter?

[bobloblaw]

They will fit there, yes. There's a sensor plate underneath that area for full size V-Bat and CGY750 sensors.

[Colonny5]

I see that a separate sensor fits there but what about a sk720 or microbeast. I can't tell if it's easy to get to in order to setup or make adjustments or be able to attach the USB connector.

[Inverse]

What is it about me and belt driven Itais?
I have a Ducati, a Protos 500 and now this comes out

[goblinhelicopter]

Originally Posted by Colonny5

I see that a separate sensor fits there but what about a sk720 or microbeast. I can't tell if it's easy to get to in order to setup or make adjustments or be able to attach the USB connector.

If the unit flybarless consists of a single party (as miniVbar, BeastX, SK720 .....) you put on a support that has never appeared in the images

Follow this thread, soon will insert pictures of this support.

[helicraze]

Can we have some more official pics???