Register Now

pmadren · 10-07-2009, 11:48 PM

Looking to upgrade some of the items on the E Flite 400 3D. Can some of you let me what sites I can buy this from?

Seebodener · 10-08-2009, 12:48 AM

take a look here at cnc Helicopter: http://www.cnchelicopter.com/servlet...400/Categories

sethf8403 · 10-08-2009, 08:32 AM

i got most of my stuff from ebay...

RedLine_Heli · 10-08-2009, 11:52 AM

Quote:

Originally Posted by Seebodener

take a look here at cnc Helicopter: http://www.cnchelicopter.com/servlet...400/Categories

Does anyone know the weight differences between the carbon fiber/metal/ and stock plastic frames?

sethf8403 · 10-08-2009, 02:06 PM

pretty sure the plastic one is lightest, i'm running the carbon fiber frame and it's sooo strong, very light! i don't think it is enough to make a difference...though i gotta recommend the cnc frames, if you do happen to break part of it(NOT LIKELY) you can order new sides and bottoms for 6 bucks a piece.i believe they also have nicer bearings in them, my bird ran a little bit quieter and cooler after i switched it from the plastic...

pmadren · 10-09-2009, 12:19 AM

Where is a good place to locate the main gears, servo gears and main rotor blades

sethf8403 · 10-09-2009, 12:25 AM

i would suggest ebay...mainly because i'm selling packs of new servo gears there, along with lots of other new partsLOL. they always have good prices, and just about everything you can think of, just enter "blade 400" in the search field. just about every piece of equiptment on my bird came from ebay including the heli itself. with the exception of things i bought at my local hobby shop...
http://toys.shop.ebay.com/Radio-Cont...=p3286.c0.m282

here are my servo gears if you need some, i combine shipping...
http://cgi.ebay.com/Eflite-Blade-400...item33565ca249

pmadren · 10-09-2009, 12:27 AM

Thanks will do right now.

spootman · 10-09-2009, 12:29 AM

For the cheapest stock parts go to ronlund.com and they charge very close to the actual shipping cost.

pmadren · 10-09-2009, 12:37 AM

check the rolund site, they do not carry blade 400 3d parts

spootman · 10-09-2009, 03:48 AM

Quote:

Originally Posted by pmadren

check the rolund site, they do not carry blade 400 3d parts

For the stock parts such as the main gear like you asked. Here is the link http://www.ronlund.com/Merchant2/mer..._Code=BLADE400

10-07-2009, 11:48 PM	#1 (permalink)
pmadren Join Date: Sep 2009	What site can I get the CNC items for the Blade 400? Looking to upgrade some of the items on the E Flite 400 3D. Can some of you let me what sites I can buy this from?

10-08-2009, 12:48 AM	#2 (permalink)
Seebodener Registered Users My HF Map location Join Date: May 2008	take a look here at cnc Helicopter: http://www.cnchelicopter.com/servlet...400/Categories __________________ Jörg * fly fast - live slow *

10-09-2009, 12:19 AM	#6 (permalink)
pmadren Thread Starter Join Date: Sep 2009	Ok, more parts question Where is a good place to locate the main gears, servo gears and main rotor blades

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-08-2009, 08:32 AM	#3 (permalink)
sethf8403 Registered Users Join Date: Sep 2009	i got most of my stuff from ebay...

10-08-2009, 02:06 PM	#5 (permalink)
sethf8403 Registered Users Join Date: Sep 2009	pretty sure the plastic one is lightest, i'm running the carbon fiber frame and it's sooo strong, very light! i don't think it is enough to make a difference...though i gotta recommend the cnc frames, if you do happen to break part of it(NOT LIKELY) you can order new sides and bottoms for 6 bucks a piece.i believe they also have nicer bearings in them, my bird ran a little bit quieter and cooler after i switched it from the plastic...

10-09-2009, 12:25 AM	#7 (permalink)
sethf8403 Registered Users Join Date: Sep 2009	i would suggest ebay...mainly because i'm selling packs of new servo gears there, along with lots of other new partsLOL. they always have good prices, and just about everything you can think of, just enter "blade 400" in the search field. just about every piece of equiptment on my bird came from ebay including the heli itself. with the exception of things i bought at my local hobby shop... http://toys.shop.ebay.com/Radio-Cont...=p3286.c0.m282 here are my servo gears if you need some, i combine shipping... http://cgi.ebay.com/Eflite-Blade-400...item33565ca249

10-09-2009, 12:27 AM	#8 (permalink)
pmadren Thread Starter Join Date: Sep 2009	Thanks will do right now.

10-09-2009, 12:29 AM	#9 (permalink)
spootman Registered Users My HF Map location Join Date: Nov 2008	For the cheapest stock parts go to ronlund.com and they charge very close to the actual shipping cost.

10-09-2009, 12:37 AM	#10 (permalink)
pmadren Thread Starter Join Date: Sep 2009	check the rolund site, they do not carry blade 400 3d parts

Register Now

Log-in