![]() |
|
| Register | FAQ | PM | News | Events | Groups | Blogs | Calendar | Mark Forums Read |
![]() |
|
Unregistered
|
||||||
| Mikado Logo Helicopters Mikado Logo Helicopters Discussion |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Registered Users
Join Date: Sep 2008
Location: Italy - Japan
|
I know that has been talking a lot in this forum abt flight time on a L600.
I am bit concerned abt the times I got now, after a good 8+ minutes being SE. Running same lipos, 10S 5000mAh, with 14t, Pyro 450, Jive 80HV, 623mm blades. Accordind Mr. Mel HS calculator I am running 1800 (60%) 1900 (70%) 2100 (85%) My last flights entirely at 1800 I got 5.30m, cell at 3.72. I was thinking to get this timing running above 2000rpm! Is there anything that I missed or maybe just my collective management? Chris
__________________
Logo 600 3D MiniV 5.3 Pro SAB Goblin 500 MiniV 5.3 Pro Rigid 480 6S Beast X MCPX BLS |
|
|
|
|
|
#2 |
|
Registered Users
Join Date: Mar 2010
Location: eu
|
Check with optical tac to get true rpm.
Hard to say you are getting too little flight time since its really subjective. On my 600 I use 10s 5000mah, Jive 120, Scorpion 4225-610kv, Edge 603, 12t pinion 2270rpm at 60% and yeild 4:35 flight time going moderate on collective and 4:00 when I use full collective often (14 degrees)
__________________
(´・ω・`) ギルティクラウン (´・ω・`) (´・ω・`) (´・ω・`) |
|
|
|
|
|
#3 | |
|
Registered Users
Thread Starter
Join Date: Sep 2008
Location: Italy - Japan
|
Quote:
Need to find a good way.Pretty scary tho to leave the stick with a 600 hovering in front of you! ![]() Chris
__________________
Logo 600 3D MiniV 5.3 Pro SAB Goblin 500 MiniV 5.3 Pro Rigid 480 6S Beast X MCPX BLS |
|
|
|
|
|
|
#4 |
|
Registered Users
Join Date: Apr 2010
Location: Bay Area, Ca
|
I get 3 minutes on 10s 4000's @ 2200 if I'm lucky before I strip a gear.
__________________
Gaui X5 VBar + Gov mCPX BL |
|
|
|
|
|
#5 |
|
Registered Users
Join Date: Mar 2010
Location: eu
|
You must have a super cool motor.
__________________
(´・ω・`) ギルティクラウン (´・ω・`) (´・ω・`) (´・ω・`) |
|
|
|
|
|
#6 | |
|
Registered Users
Thread Starter
Join Date: Sep 2008
Location: Italy - Japan
|
Quote:
![]() ![]() ![]()
__________________
Logo 600 3D MiniV 5.3 Pro SAB Goblin 500 MiniV 5.3 Pro Rigid 480 6S Beast X MCPX BLS |
|
|
|
|
|
|
#7 |
|
Registered Users
Join Date: Mar 2010
Location: Cincinnati, Ohio
|
Running a 12S setup at 2150 headspeed with an 11T pinion. My Voltz 4200's I get 6:30 minutes and use between 2900-3000mah. Thunder Power 3300's I get 5:00 and use about 2000mah give or take. Thunder Power 2650's I use for 4:00, but only practice hovering and orientations. Keep in mind I only do very FFF, loops, rolls, flips and some inverted hovering.
__________________
Logo 600 12S- HKIII 4035-500, Jive 80HV, BLS451's, BLS251, Edge 623's, Edge 105's, Mini VBar Futaba 8FG |
|
|
|
|
|
#8 |
|
Registered Users
Join Date: Apr 2010
Location: Bay Area, Ca
|
Its only an HKIII 4035-560, not sure what your trying to imply.
__________________
Gaui X5 VBar + Gov mCPX BL |
|
|
|
![]() |
|
Unregistered
|
||||||
| Mikado Logo Helicopters Mikado Logo Helicopters Discussion |
| Thread Tools | |
| Display Modes | |
|
|