Register Now

sprocketdog · 06-21-2011, 05:27 PM

New to fbl, using 3gx on jr 9303 what do i need for radio mixing to make work. Have system bound to each other. but only ail servo works. Thanks for any help I"m complete noob at this
The 9303 ia an fm model with dsm2 module. .

sprocketdog · 06-22-2011, 03:29 PM

It is a radio programming issue. I think i have it figured out thanks, just need to learn how to map channels for 3gx.

recurry · 06-23-2011, 05:45 PM

Unless you are using satellites there is no channel mapping to do - just connect it properly. If you are using satellites the 3GX instructions tell you what channels need to mapped to where then it's just q matter of figuring out how to do it in your radio.

I found the 3GS to be really easy to setup. I hope you do as well. Best of luck!

sprocketdog · 06-23-2011, 10:47 PM

sent it off to align it has a problem works fine with a standard receiver but with satellites only only one servo works. The aileron servo does pitch and elevator Should have a working unit next week.

takasan · 06-25-2011, 04:16 AM

im having a similar issue. i have a futaba with a spektrum dsm2 module. i had purchased dsmx sat. receivers and had trouble binding the 3gx so i pulled off my older dsm2 sat receivers off my plane and it bound. i set everything up and was about ready to fly then, and then suddenly it acted like it wasnt bound again. i bound it to a friends spektrum, and it worked but the swash acted funny. i may have to give align a call

sprocketdog · 07-01-2011, 10:28 PM

Just an update. repaired unit came in mail all is good.

takasan · 07-02-2011, 03:13 AM

still waiting for mine

06-21-2011, 05:27 PM	#1 (permalink)
sprocketdog Registered Users Join Date: Sep 2009	radio help New to fbl, using 3gx on jr 9303 what do i need for radio mixing to make work. Have system bound to each other. but only ail servo works. Thanks for any help I"m complete noob at this The 9303 ia an fm model with dsm2 module. .

06-23-2011, 05:45 PM	#3 (permalink)
recurry Registered Users Join Date: Nov 2010	Unless you are using satellites there is no channel mapping to do - just connect it properly. If you are using satellites the 3GX instructions tell you what channels need to mapped to where then it's just q matter of figuring out how to do it in your radio. I found the 3GS to be really easy to setup. I hope you do as well. Best of luck! __________________ Ron Stuff I fly.... Mikado, a couple of Aligns, VBar/SK720, an old Robbie Nova, some multirotor stuff w/ AutoQuad6, Naza, APM, PX4, and full size Exec162F and a T210 just for fun!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-22-2011, 03:29 PM	#2 (permalink)
sprocketdog Registered Users Thread Starter Join Date: Sep 2009	It is a radio programming issue. I think i have it figured out thanks, just need to learn how to map channels for 3gx.

06-23-2011, 10:47 PM	#4 (permalink)
sprocketdog Registered Users Thread Starter Join Date: Sep 2009	sent it off to align it has a problem works fine with a standard receiver but with satellites only only one servo works. The aileron servo does pitch and elevator Should have a working unit next week.

06-25-2011, 04:16 AM	#5 (permalink)
takasan Registered Users My HF Map location Join Date: Jun 2011	im having a similar issue. i have a futaba with a spektrum dsm2 module. i had purchased dsmx sat. receivers and had trouble binding the 3gx so i pulled off my older dsm2 sat receivers off my plane and it bound. i set everything up and was about ready to fly then, and then suddenly it acted like it wasnt bound again. i bound it to a friends spektrum, and it worked but the swash acted funny. i may have to give align a call

07-01-2011, 10:28 PM	#6 (permalink)
sprocketdog Registered Users Thread Starter Join Date: Sep 2009	Just an update. repaired unit came in mail all is good.

07-02-2011, 03:13 AM	#7 (permalink)
takasan Registered Users My HF Map location Join Date: Jun 2011	still waiting for mine

Register Now

Log-in