Register Now

awr57 · 03-09-2016, 10:06 AM

Hi all,
I'm new here & I need some help please!. I have a Align Trex 500L with the Microbeast plus system, I have tried everything to get this helicopter set-up & for some reason I just cant get the set-up right!
so here is what I have.
Align Trex Dominator 500L with microbeast plus, software version= 4.1.5
Transmitter = Fly-Sky FSI10
If you could please give me each setting for the microbeast plus & setting for the transmitter. If anybody out there can help, it would be Greatly appreciated.
Thanks for your help, & have a great day!

helibeli · 03-09-2016, 10:53 AM

If only it was that simple.!

gunny_jeeves · 03-09-2016, 11:10 AM

Hmmm.... So the BeastX forum is likely to be the best spot.

https://www.helifreak.com/forumdisplay.php?f=239

The Align 500L likely anyone could help you... That's in the general "500 forum"

Your radio? That's the toughest. Hopefully you're confident with it and Just need translations to BeastX.

If not, you may need to google that radio and try to find a heli setup. I think you can download and upload model files to it. If not, you'll need specific help on setting that radio up for an FBL heli. (BeastX, Ikon, Brain, all that will translate. Same basic setup on the TX.)

awr57 · 03-09-2016, 01:53 PM

Thanks for the help I will try the web site that you gave me for the BeastX

redsox · 03-09-2016, 02:27 PM

Your still new and likely your posts are being held up. So ill pm you my phone number and email adress. Your gonna need a ton of help but its all a learning process. All i can say is research your butt off. If its as interesting to you as it is to us, then you'll have no problem. If you find it boring and tedious then thats a problem.

Literally google everything...most of the time it will bring you to specific threads on here, and this forum is the best sorce for helicopter knowledge.

Only problem for me is the radio, I've only used spektrum, but we can likely make it work. Is the helicopter built and/or built correctly?

awr57 · 03-09-2016, 05:55 PM

Hello & thanks,
Yes the helicopter is built correctly, just waiting for the radio to charge.
one thing I did notice is that going through the Beast set-up from a video on this web-site in the swash plate set-up, one of the servos does not hardly move (aileron servo) and when I switch servos, the problem stays with that channel?? now when you use the elevator control the servo works great! so, as soon as my radio is charged I'm going to start back at the swash plate video to see if I can find the first of many problems.
Thanks redsox

awr57 · 03-09-2016, 05:57 PM

Hey Sir, thanks for that address I think this is going to help a lot.
To bad, my radio went dead.

CrashNburn420 · 03-09-2016, 06:09 PM

Make sure to check out these videos. Step by step directions for each portion of the setup.

Also if you're having problems with a certain step in the setup, post what letter you're working on at the time.

Do you have the manual for the BX?

Videos
https://www.helifreak.com/showthread.php?t=305195

awr57 · 03-10-2016, 01:06 PM

I don't know guys, I followed the set-up in the videos 3 times & for some reason I just cant get the servo set up right!. I have tried everything. Just wondering if the connections between the Beast & the receiver are right, I just don't know!!!!!

awr57 · 03-10-2016, 01:28 PM

Does anybody think that maybe you don't run the connections between the beastX & the receiver like it said in the manual?

skyrotor · 03-10-2016, 08:15 PM

You in Vegas? Bring it out to Bennett field this weekend. I'm sure someone there will help you set up BeastX. The beauty with that unit is you don't need a computer.

03-09-2016, 10:06 AM	#1 (permalink)
awr57 Registered Users Join Date: Mar 2016	Align 500L help Hi all, I'm new here & I need some help please!. I have a Align Trex 500L with the Microbeast plus system, I have tried everything to get this helicopter set-up & for some reason I just cant get the set-up right! so here is what I have. Align Trex Dominator 500L with microbeast plus, software version= 4.1.5 Transmitter = Fly-Sky FSI10 If you could please give me each setting for the microbeast plus & setting for the transmitter. If anybody out there can help, it would be Greatly appreciated. Thanks for your help, & have a great day!

03-09-2016, 01:53 PM	#4 (permalink)
awr57 Registered Users Thread Starter Join Date: Mar 2016	Heli help Thanks for the help I will try the web site that you gave me for the BeastX

03-09-2016, 02:27 PM	#5 (permalink)
redsox Registered Users Join Date: Sep 2013	Your still new and likely your posts are being held up. So ill pm you my phone number and email adress. Your gonna need a ton of help but its all a learning process. All i can say is research your butt off. If its as interesting to you as it is to us, then you'll have no problem. If you find it boring and tedious then thats a problem. Literally google everything...most of the time it will bring you to specific threads on here, and this forum is the best sorce for helicopter knowledge. Only problem for me is the radio, I've only used spektrum, but we can likely make it work. Is the helicopter built and/or built correctly? __________________ HD Cell 500- Chase 360 Coupla planks Spektrum dx7s- dx7 gen2

03-09-2016, 05:55 PM	#6 (permalink)
awr57 Registered Users Thread Starter Join Date: Mar 2016	Heli Hello & thanks, Yes the helicopter is built correctly, just waiting for the radio to charge. one thing I did notice is that going through the Beast set-up from a video on this web-site in the swash plate set-up, one of the servos does not hardly move (aileron servo) and when I switch servos, the problem stays with that channel?? now when you use the elevator control the servo works great! so, as soon as my radio is charged I'm going to start back at the swash plate video to see if I can find the first of many problems. Thanks redsox

03-09-2016, 06:09 PM	#8 (permalink)
CrashNburn420 Registered Users Join Date: May 2012	Align 500L help Make sure to check out these videos. Step by step directions for each portion of the setup. Also if you're having problems with a certain step in the setup, post what letter you're working on at the time. Do you have the manual for the BX? Videos https://www.helifreak.com/showthread.php?t=305195

03-09-2016, 10:53 AM	#2 (permalink)
helibeli Registered Users Join Date: Aug 2008	If only it was that simple.!

03-09-2016, 11:10 AM	#3 (permalink)
gunny_jeeves Registered Users Join Date: Mar 2013	Hmmm.... So the BeastX forum is likely to be the best spot. https://www.helifreak.com/forumdisplay.php?f=239 The Align 500L likely anyone could help you... That's in the general "500 forum" Your radio? That's the toughest. Hopefully you're confident with it and Just need translations to BeastX. If not, you may need to google that radio and try to find a heli setup. I think you can download and upload model files to it. If not, you'll need specific help on setting that radio up for an FBL heli. (BeastX, Ikon, Brain, all that will translate. Same basic setup on the TX.)

03-09-2016, 05:57 PM	#7 (permalink)
awr57 Registered Users Thread Starter Join Date: Mar 2016	Hey Sir, thanks for that address I think this is going to help a lot. To bad, my radio went dead.

03-10-2016, 01:06 PM	#9 (permalink)
awr57 Registered Users Thread Starter Join Date: Mar 2016	Help I don't know guys, I followed the set-up in the videos 3 times & for some reason I just cant get the servo set up right!. I have tried everything. Just wondering if the connections between the Beast & the receiver are right, I just don't know!!!!!

03-10-2016, 01:28 PM	#10 (permalink)
awr57 Registered Users Thread Starter Join Date: Mar 2016	Does anybody think that maybe you don't run the connections between the beastX & the receiver like it said in the manual?

03-10-2016, 08:15 PM	#11 (permalink)
skyrotor Registered Users Join Date: Dec 2011	You in Vegas? Bring it out to Bennett field this weekend. I'm sure someone there will help you set up BeastX. The beauty with that unit is you don't need a computer.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in