Register Now

gs550t1981 · 06-23-2012, 06:36 PM

I have the Walkera V100D08 and installed a new electronic unit. The RX2623V-D. I turn on my Devention Devo 7 and nothing. LED just keeps blinking. What am I doing wrong? Do i have to use the bind plug for anything? I thought it was just turn on and go. I even reset all my models thinking it was something with that. I dont know what to do. Please help.

Hamper · 07-13-2012, 09:18 PM

Yes if it is a new one you need to use your bind plug .

werner0427 · 08-16-2012, 09:22 PM

I , too, Just recieved a Walkera V100D08 and am having trouble with it and the DEVO7 Tx. I just get a fast blinking reciever led. Tried using the blind plug, but between instructions in the manual and the cd, I might as well have been reading the oriental version. Any step by step instructions would help. Spent some hard earned pennies to only have a blinkin LED. Thanx from a Nubee.

tarus64 · 08-24-2012, 11:49 PM

I'm having binding problems with the v120d02s and devo 7 course I'm newbi and got ahead of things when recieving this from xheli it binded first try and then I found out ready to fly only counts when you've been flying.I know nothing about function settings either.sure hope I can find some vids to get this bird flying.

06-23-2012, 06:36 PM	#1 (permalink)
gs550t1981 Registered Users My HF Map location Join Date: Jun 2012	RX2623V-D Binding To Devo 7 (V100d08) PLEASE HELP!!!!! I have the Walkera V100D08 and installed a new electronic unit. The RX2623V-D. I turn on my Devention Devo 7 and nothing. LED just keeps blinking. What am I doing wrong? Do i have to use the bind plug for anything? I thought it was just turn on and go. I even reset all my models thinking it was something with that. I dont know what to do. Please help.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-13-2012, 09:18 PM	#2 (permalink)
Hamper Registered Users Join Date: May 2012	Yes if it is a new one you need to use your bind plug .

08-16-2012, 09:22 PM	#3 (permalink)
werner0427 Registered Users Join Date: Aug 2012	I , too, Just recieved a Walkera V100D08 and am having trouble with it and the DEVO7 Tx. I just get a fast blinking reciever led. Tried using the blind plug, but between instructions in the manual and the cd, I might as well have been reading the oriental version. Any step by step instructions would help. Spent some hard earned pennies to only have a blinkin LED. Thanx from a Nubee.

08-24-2012, 11:49 PM	#4 (permalink)
tarus64 Registered Users Join Date: Aug 2012	I'm having binding problems with the v120d02s and devo 7 course I'm newbi and got ahead of things when recieving this from xheli it binded first try and then I found out ready to fly only counts when you've been flying.I know nothing about function settings either.sure hope I can find some vids to get this bird flying.

Register Now

Log-in