Register Now

skysoljah · 06-20-2009, 02:00 AM

Hi,

thought my tail kickback is gone, but its not. I took my hub out and ran the 250, I'm getting a jump or glitch a soon as i go past mid setting on my throttle (7C 2.4) and on the way down at the same point on the throtttle, has any body experienced this?
Your input will be greatly appreciated.

Thanks

rccardude04 · 06-20-2009, 03:18 AM

Is the ferrite ring still on your ESC's lead to the receiver?

-Eric

skysoljah · 06-20-2009, 03:07 PM

I may have found a solution to my problem, I programed my ESC without having a linear curve, I set it to 0,25,50,75,100 and programed my ESC. the tail behaved on all throttle settings. I then put a 0,50,90,90,90 which was what I had on my first program and the heli behaved also. Hope this helps somebody.

06-20-2009, 02:00 AM	#1 (permalink)
skysoljah Registered Users Join Date: Jul 2006	Glitch? Hi, thought my tail kickback is gone, but its not. I took my hub out and ran the 250, I'm getting a jump or glitch a soon as i go past mid setting on my throttle (7C 2.4) and on the way down at the same point on the throtttle, has any body experienced this? Your input will be greatly appreciated. Thanks

06-20-2009, 03:18 AM	#2 (permalink)
rccardude04 Registered Users Join Date: Apr 2007	Is the ferrite ring still on your ESC's lead to the receiver? -Eric __________________ Bergen Gasser EB ~ GY611 ~ DS8611As ~ Raja's Jewel Generator \\ RXCharger Free since 2008! TT Raptor 50 Titan ~ Slowly becoming FBL BEAM E4 ~ 6s ~ ICE Lite 50 ~ Scorpion 1630KV ~ Spartan DS760 ~ HS65MG/HS5084MG

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-20-2009, 03:07 PM	#3 (permalink)
skysoljah Registered Users Thread Starter Join Date: Jul 2006	I may have found a solution to my problem, I programed my ESC without having a linear curve, I set it to 0,25,50,75,100 and programed my ESC. the tail behaved on all throttle settings. I then put a 0,50,90,90,90 which was what I had on my first program and the heli behaved also. Hope this helps somebody.

Register Now

Log-in