80HV Settings

[aja1216]

Anyone running an CC 80hv with a the stock motor?

If so can you please post you settings please.

Thanks,

AJ

[Larry227]

I'm running the HW esc that came with my kit but some of my settings may help.
https://www.helifreak.com/showpost.p...59&postcount=2

You can also check post #3 in this thread https://www.helifreak.com/showthread...ht=motor+poles for more info.

Wish I had more precise answers but those two threads are the closest I can find. At least it gives you a little info to start with.

[aja1216]

Thanks Larry!!! On my CC I'm running 12khz PWM with 5 Degree timing and the motor is coming down hot. From what I read looks like I have to raise it to around 15-18.

Thanks a lot!!!

AJ

[RCTada]

I have 22.5 on my hobbywing 70hv seems to be doing the job. Will try 18.75 not sure yet.

Sent from my DROID BIONIC using Tapatalk

[PieroCapredoni]

Hi, Im using OUTRUNNER MODE and 18deg timing in my CC 80HV. Works perfect, no temp problems, good power. I fly sport and light 3D only.

[aja1216]

Originally Posted by PieroCapredoni

Hi, Im using OUTRUNNER MODE and 18deg timing in my CC 80HV. Works perfect, no temp problems, good power. I fly sport and light 3D only.

I'm going to try that out!!! What headspeeds are you running on your gov?

Thanks bud

AJ

[sarpilot]

Originally Posted by aja1216

Anyone running an CC 80hv with a the stock motor?

If so can you please post you settings please.

Thanks,

AJ

I have the 80HV and stock motor but 11T pinion for 2150 in Idle2. If you want those numbers post back.....

[aja1216]

I would love those number!!!!

THanks Bud!!!!

[sarpilot]

Originally Posted by aja1216

I would love those number!!!!

THanks Bud!!!!

OK gotta work today but when I get home tonite I'll plug it into castle link and post the settings for you…


Sent from my DROID3 using Tapatalk 2

[sarpilot]

Here ya go.....



.
################################################## #####
# Castle Link Data File
# Created: Saturday, June 16, 2012
# Do Not Edit This File By Hand
################################################## #####
Hex55: 85
Brake Delay: .6 sec (Delayed) (*)
Brake Ramp: Immediate (*)
Cutoff Type: Soft Cutoff
Motor Start Power: 39
Direction: Forward (*)
Brake Strength: 0
PWM Rate: 12 Khz (*)
Cutoff Voltage: Auto Li-Po (*)
Current Limiting: Disabled
Sample Frequency: 5 Sample / Sec
Power-On Beep: Enabled (*)
Auto-Lipo Volts/Cell: 3.2 Volts/Cell (*)
Motor Timing: 18
Data Log Enabled: 255
Vehicle Type: Helicopter
Throttle Type: Governor Mode
Throttle Response: 5
Governor Gain: 25
Initial Spool-Up Rate: 2
Head Speed Change Rate: 5
Auto Rotate Enabled: True
Governor Mode Type: Fixed
Vehicle Setup - Battery Type: LiPo
Vehicle Setup - Number of Cells: 12
Vehicle Setup - Battery Voltage: 44.4000
Vehicle Setup - Gear Ratio: 9.454
Vehicle Setup - Motor Kv: 540
Vehicle Setup - Motor Number of Poles: 8
Desired Head Speed 1: 1956
Desired Head Speed 2: 2052
Desired Head Speed 3: 2159