Register Now

505b400 · 07-06-2012, 03:17 PM

I was installing my new 54 and got to thinking about fuel pressure and was wondering what sort of fuel pressure the pump supplies for an operating range of say 40,000-120,000?

505b400 · 07-06-2012, 03:19 PM

I was installing my new 54 and got to thinking about fuel pressure and was wondering what sort of fuel pressure the pump supplies for an operating range of say 40,000-120,000?

yf222000 · 07-06-2012, 04:54 PM

505b400 · 07-06-2012, 05:40 PM

I'm actually wondering about the fuel pressure the pump sends to the turbine from a fuel injector perspective

yf222000 · 07-06-2012, 06:11 PM

Ahh I see. I wouldn't think it's all that much, but it did triggered my curiosity.

Cletus · 07-07-2012, 05:29 PM

Don't know what's actually required at the MW-54 nozzles, but a Flightworks model 200-C pump has an open flow-rate of up to 600ml/minute and can do a max of 140-PSI.

07-06-2012, 03:17 PM	#1 (permalink)
505b400 Registered Users Join Date: Aug 2010	What sort of fuel pressure does a wren need? I was installing my new 54 and got to thinking about fuel pressure and was wondering what sort of fuel pressure the pump supplies for an operating range of say 40,000-120,000? __________________ Trex 500, Trex 450 pro Bergen Intrepid mw54 TURBINE!

07-06-2012, 03:19 PM	#2 (permalink)
505b400 Registered Users Thread Starter Join Date: Aug 2010	Required fuel pressure to run a wren turbine? I was installing my new 54 and got to thinking about fuel pressure and was wondering what sort of fuel pressure the pump supplies for an operating range of say 40,000-120,000? __________________ Trex 500, Trex 450 pro Bergen Intrepid mw54 TURBINE!

07-06-2012, 04:54 PM	#3 (permalink)
yf222000 Registered Users Join Date: May 2012	Fuel pressure ... Last edited by yf222000; 07-06-2012 at 06:15 PM..

07-06-2012, 05:40 PM	#4 (permalink)
505b400 Registered Users Thread Starter Join Date: Aug 2010	I'm actually wondering about the fuel pressure the pump sends to the turbine from a fuel injector perspective __________________ Trex 500, Trex 450 pro Bergen Intrepid mw54 TURBINE!

07-06-2012, 06:11 PM	#5 (permalink)
yf222000 Registered Users Join Date: May 2012	Fuel pressure Ahh I see. I wouldn't think it's all that much, but it did triggered my curiosity.

07-07-2012, 05:29 PM	#6 (permalink)
Cletus Registered Users Join Date: Apr 2009	Don't know what's actually required at the MW-54 nozzles, but a Flightworks model 200-C pump has an open flow-rate of up to 600ml/minute and can do a max of 140-PSI. __________________ A helicopter in flight is a working demonstration of all the basic physical laws of the universe in action. Member: AMA 928457 - IRCHA 3449

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in