talon 120 on a trex 700

[overhill]

Is the talon 120 up to the job on a trex 700 with xnova 4530/480kv

[RC Mike]

Originally Posted by overhill

Is the talon 120 up to the job on a trex 700 with xnova 4530/480kv

That depends on how it’s setup and how hard you fly.
　
If you don’t have extreme pitch than it will be ok. If you go +/- 15 with crazy headspeed then no.
　
　
.
　

[STAZZ]

Originally Posted by overhill

Is the talon 120 up to the job on a trex 700 with xnova 4530/480kv

I Have it in my 700 DFC PRO HV. I had to put a capacitor in order to help BEC to deal with HV servos, but that's more of Vbar's issue. I fly with 750MX-530kv motor and +/-12 degrees of pitch. So far so good!

After that I have also installed Talon120 into G570@12S, but with non-hv servos. All good, can't complain. Logs in ESC would be nice though.

[overhill]

Thanks for the feed back looked at logs from my 160 that took of to put on my goblin 700 kse and max spike are 150a and average 70a. I run 2050rpm switch 690 -/+12