Main and tail blade tightness

whippo · 07-04-2012, 12:10 AM

Mine came pretty lose on both I tightened the mains to where you can move them by hand but they don't move by gravity. The tails I just tightened a little. As my sig shows I like quality built birds, I have not put a lot of time on this 130 but the first day has been very nice and I am excited to push it a little more on our country's bday tomorrow!

ChrisG23 · 07-04-2012, 12:55 AM

I would like to hear the response from HH rep on this topic. I have a theory that loose tail blades snap off.

whippo · 07-04-2012, 07:46 AM

That was my exact thought if you fly bigger helis you know that the tail shouldn't be too tight though!

GSPI · 07-04-2012, 08:03 AM

I agree, snug them up like you said, less issues.

07-04-2012, 12:10 AM	#1
whippo Registered Users Join Date: Jul 2011 Location: Fortville, IN	Main and tail blade tightness Mine came pretty lose on both I tightened the mains to where you can move them by hand but they don't move by gravity. The tails I just tightened a little. As my sig shows I like quality built birds, I have not put a lot of time on this 130 but the first day has been very nice and I am excited to push it a little more on our country's bday tomorrow! __________________ ________________ Gaui - MSH - Scorpion - JR - Byron - OS - MKS - Savox - Edge - Spin - Rails - Lynx - Gensace - Skookum - KBDD www.irchc.com

07-04-2012, 07:46 AM	#3
whippo Registered Users Thread Starter Join Date: Jul 2011 Location: Fortville, IN	That was my exact thought if you fly bigger helis you know that the tail shouldn't be too tight though! __________________ ________________ Gaui - MSH - Scorpion - JR - Byron - OS - MKS - Savox - Edge - Spin - Rails - Lynx - Gensace - Skookum - KBDD www.irchc.com

07-04-2012, 08:03 AM	#4
GSPI Registered Users Join Date: May 2012 Location: CLE	I agree, snug them up like you said, less issues. __________________ Beating the air into submission... one Blade® at a time! Lynx Heli Innovations Team Pilot SilentDRC.net -The Order of Brushless Witnesses

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-04-2012, 12:55 AM	#2
ChrisG23 Registered Users Join Date: Feb 2011 Location: Allentown,PA	I would like to hear the response from HH rep on this topic. I have a theory that loose tail blades snap off.