Register Now

AlvaSpeed · 09-07-2013, 11:34 AM

I did a search and found nothing....
I decided to build one of the G5´s I have and was going to install DS410 servos and now I see that if I place the servo spacers one of the servos hit the belt pulley.
Are these spacers needed?

AlvaSpeed · 09-07-2013, 11:50 AM

It fits.

branflake · 09-11-2013, 08:51 AM

if i recall, the spaces were dubbed "hs-65" spacers. I run those servos and the spacer is the only way to get the arms close to 90*.

hows the build going? I converted my other one to FBL over the weekend...waiting for it to be under 100 out to maiden.

AlvaSpeed · 09-11-2013, 11:15 PM

Servos are in.
1700kv NTM motor is in with a 12T pinion
Waiting for a YEP 45 to arrive.
Going to use a 3GX on it.

What FBL head did you use on yours?
I ask because I have another kit with a flybar head.

branflake · 09-11-2013, 11:54 PM

both of mine have the g5 conversion FBL head. parts are hard to find, so ill try something else if i my parts stash ever runs out

09-07-2013, 11:34 AM	#1 (permalink)
AlvaSpeed Registered Users Join Date: Nov 2009	Servo spacers I did a search and found nothing.... I decided to build one of the G5´s I have and was going to install DS410 servos and now I see that if I place the servo spacers one of the servos hit the belt pulley. Are these spacers needed?

09-11-2013, 08:51 AM	#3 (permalink)
branflake Registered Users My HF Map location Join Date: Jul 2009	if i recall, the spaces were dubbed "hs-65" spacers. I run those servos and the spacer is the only way to get the arms close to 90. hows the build going? I converted my other one to FBL over the weekend...waiting for it to be under 100 out to maiden. __________________ Gaui X5!* Gaui X3! Outrage G5 Blade mCPX BL \| MultiWii Quadrotor

09-11-2013, 11:54 PM	#5 (permalink)
branflake Registered Users My HF Map location Join Date: Jul 2009	both of mine have the g5 conversion FBL head. parts are hard to find, so ill try something else if i my parts stash ever runs out __________________ Gaui X5! Gaui X3! Outrage G5 Blade mCPX BL \| MultiWii Quadrotor

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-07-2013, 11:50 AM	#2 (permalink)
AlvaSpeed Registered Users Thread Starter Join Date: Nov 2009	It fits.

09-11-2013, 11:15 PM	#4 (permalink)
AlvaSpeed Registered Users Thread Starter Join Date: Nov 2009	Servos are in. 1700kv NTM motor is in with a 12T pinion Waiting for a YEP 45 to arrive. Going to use a 3GX on it. What FBL head did you use on yours? I ask because I have another kit with a flybar head.

Register Now

Log-in