Synergy N5c clutch

[Edward74]

Looking for help, my clutch is slipping pretty good, I've ordered a new bell with liner and a new clutch and put it in and still is slipping. been running nitro's for years and never has clutch issue's, any suggestions?

[Matt Sherman]

Sounds like your fan hub may be slipping on the motor crankshaft.

[Rodney Kirstine]

That's about the only thing I could think of, too, as long as the clutch and liner are both good. That, or the one-way bearing.

[LoveToFly1]

Originally Posted by Matt Sherman

Sounds like your fan hub may be slipping on the motor crankshaft.

Originally Posted by Rodney Kirstine

That's about the only thing I could think of, too, as long as the clutch and liner are both good. That, or the one-way bearing.

+1

check that the fan hub is properly attached to the crank. remember, the strength of this part is not the crank nut, but the pinch bolts. so don't crush the fan but tightening the crank nut and ruin it.