Draw main frame T-Rex 600 Pro based on T-Rex 550L

[Seregasvi]

Hello.
I translate Google translator, so sorry for my English.
I want to make a new main frame for my Т-Rex 600Pro.
I want to make the servo location as well as on Т-Rex 550L
Main frame will draw new under the bearing support: http://shop.align.com.tw/product_inf...07&language=en
http://shop.align.com.tw/advanced_se...7XXW&x=10&y=12
I have a main frame for Т-Rex 600Pro, but not for Т-Rex 550L.
Therefore, I can only make a scan main frame Т-Rex 600Pro, but that would be all right to draw, I also need a scan main frame Т-Rex 550L.
Could you help me?
After I had drawn this main frame, I'll share it with everyone.
Also, tell me, what the distance between the two halves of the frame at Т-Rex 550L?
At Т-Rex 600Pro distance between the two halves of the frame 54mm.

[Seregasvi]

Hi Guys.
Why did not anyone answer me?
I found on the Internet a photo frame, and showed me the necessary distance.
Can somebody measure them by helicopter and write here?
Images need to zoom in to see the needed to me size.
1=
2=
3=
4=
5=
6=
7=

[buell47]

Hello, I will try it next days, okay?

[buell47]

Good Morning :-)

1= 32,0 mm
2= 63,0 mm
3= 5,0 mm
4= 35,1 mm
5= 72,0 mm
6= 51,0 mm
7= 6,4 mm

[Seregasvi]

Good Morning,
Many many thanks to you!!!

[Seregasvi]

I did everything.
Many thanks buell47.
I admire the German thoroughness and accuracy.
Everything turned out exactly the first time.
Now I'll make a frame of carbon fiber.
http://forum.rcdesign.ru/attachment....5&d=1436260821 http://forum.rcdesign.ru/attachment....1&d=1436388266 http://forum.rcdesign.ru/attachment....2&d=1436512283
http://forum.rcdesign.ru/f60/thread3...ml#post5815286
http://forum.rcdesign.ru/f60/thread3...ml#post5822477