Register Now

mynzbtr · 10-23-2014, 01:24 PM

I have currently put a FBL head on my 50 sceadu. I am using a dx9 transmitter with the ar7200bx I cant get the swash to move correctly. Do I use the 1 servo normal mode in my transmitter and what type of swashplate setting do I use in the beast x. 90 or 120 ive tried everything and get the swash to work properly. The swash is different from what i am used to seeing

gouki74 · 10-23-2014, 07:25 PM

set your trasmitter to 1servo control when using the beastX. i presume your sceadu is hpm since you see the swash as different from most. the beastx will let you use 1servo control also. do not use 120' setting on the beastx

mynzbtr · 10-23-2014, 08:11 PM

Ok, thanks I kinda had a feeling that might be it Ill give it a try. I believe the swash setting would be 90 .

10-23-2014, 01:24 PM	#1 (permalink)
mynzbtr Registered Users Join Date: Feb 2014	Need help I have currently put a FBL head on my 50 sceadu. I am using a dx9 transmitter with the ar7200bx I cant get the swash to move correctly. Do I use the 1 servo normal mode in my transmitter and what type of swashplate setting do I use in the beast x. 90 or 120 ive tried everything and get the swash to work properly. The swash is different from what i am used to seeing

10-23-2014, 08:11 PM	#3 (permalink)
mynzbtr Registered Users Thread Starter Join Date: Feb 2014	Help Ok, thanks I kinda had a feeling that might be it Ill give it a try. I believe the swash setting would be 90 .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-23-2014, 07:25 PM	#2 (permalink)
gouki74 Registered Users Join Date: Mar 2008	set your trasmitter to 1servo control when using the beastX. i presume your sceadu is hpm since you see the swash as different from most. the beastx will let you use 1servo control also. do not use 120' setting on the beastx

Register Now

Log-in