Register Now

Lee777 · 05-13-2012, 04:07 AM

Hi again, had a few problems with the tail not holding so replaced a few things and now i'm trying to rebind the tx to rx? where does the bind plug go, what slot on the rx??? i thought it could go in any, the only slot i got free is the aux 2 and if i put it in there the receiver does not blink? i do have a little switch that came with it with 3 seperate leads coming off 2 male and 1 female? does this have to be used with the 4 cell nicd rx battery pack?? i searched the net and on here and cant find anything that shows how to bind them

any help or advise appreciated.

ragge1 · 05-13-2012, 04:11 AM

batt slot ,

ragge1 · 05-13-2012, 04:12 AM

http://www.spektrumrc.com/ProdInfo/F...0UserGuide.pdf

Mateyhv · 05-13-2012, 04:23 AM

Do as ragge1 told you, the batt port is the bind port, its written on it. You can chose any other port to power the unit as positive and negative pins are all the same internally.

Lee777 · 05-13-2012, 04:29 AM

Cheers lads, sorted it!!!! where my rx was positioned on the heli i couldnt see the battery/bind plug port cus it was hid at the back

, at least i know now for next time

05-13-2012, 04:07 AM	#1 (permalink)
Lee777 Registered Users My HF Map location Join Date: Nov 2007	binding dx7 to ar7000 HELP FAST Hi again, had a few problems with the tail not holding so replaced a few things and now i'm trying to rebind the tx to rx? where does the bind plug go, what slot on the rx??? i thought it could go in any, the only slot i got free is the aux 2 and if i put it in there the receiver does not blink? i do have a little switch that came with it with 3 seperate leads coming off 2 male and 1 female? does this have to be used with the 4 cell nicd rx battery pack?? i searched the net and on here and cant find anything that shows how to bind them any help or advise appreciated.

05-13-2012, 04:11 AM	#2 (permalink)
ragge1 Registered Users Join Date: Aug 2009	batt slot , __________________ \| Kraken 700 : Neo \| Atom 6HV : Evo \| Raw 580 : Neo \| vbct \|

05-13-2012, 04:12 AM	#3 (permalink)
ragge1 Registered Users Join Date: Aug 2009	http://www.spektrumrc.com/ProdInfo/F...0UserGuide.pdf __________________ \| Kraken 700 : Neo \| Atom 6HV : Evo \| Raw 580 : Neo \| vbct \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-13-2012, 04:23 AM	#4 (permalink)
Mateyhv Registered Users Join Date: Mar 2011	Do as ragge1 told you, the batt port is the bind port, its written on it. You can chose any other port to power the unit as positive and negative pins are all the same internally.

05-13-2012, 04:29 AM	#5 (permalink)
Lee777 Registered Users Thread Starter My HF Map location Join Date: Nov 2007	Cheers lads, sorted it!!!! where my rx was positioned on the heli i couldnt see the battery/bind plug port cus it was hid at the back , at least i know now for next time

Register Now

Log-in