T-rex 600N DFC New Ys 60 Sr and Hatori

[modelltomi]

Video:

T-rex 600N DFC Ys 60 Sr Breaking-in (4 min 19 sec)

[modelltomi]

New video:
Head speed: 1600 RPM

T-rex 600N DFC New Ys 60 Sr (9 min 10 sec)

[Ben'91]

Beautiful pictures. Thank you for sharing.

[modelltomi]

Thanks!

Budaorsi helicopter meeting:

T-rex 600N DFC YS 60 Sr (3 min 58 sec)

[modelltomi]

[drunkenclam]

Very Nice!! I just finished putting my kit together, and I'm planning on using that same engine/pipe setup. I can't wait to get it in there now. It's sitting at my lhs, I guess I need to stop procrastinating and get it.

[sal98]

Thanks for the nice detailed shots and video, well appreciated.

[RookieAv8r]

Nice! I just got through swapping out the YS50 for the 60SR in my 600. Still breaking it in, but already can tell a huge difference.

Sent from my Samsung Galaxy S4 on the At&T network.

[3drcbuilder]

So, do you have to modify the helicopter in a way to install the ys engine.

[modelltomi]

Hello

No need to change anything, just fit the engine into place!

A couple of the engine information:

Much can hear that the 60 ys warms, it is not true!
And this is the second bike because my first high temperatures from the seized up. (165°)
But once it is done ys 120 engine then I realized that I made a mistake tremendously.

And now I want to help everyone who takes such a miracle Japanese engine.

Here is the manual:
http://www.rcworld.com.au/media/down...f/60SR-E-1.pdf

Here it is important that the "Tube (C) 35mm" I adhere to the engine can provide such tubes and place it in its place, if only because there is a different size pipe a little, you can say goodbye to the engine !!
Because if the other has a diameter of the tube is not good, but you can not call attention to the manuals !!

If you keep my, it will be perfect for the engine, it will not warm!
So whether you will go from 70 to 130 degrees.

I hope I could help!

[modelltomi]

The time has come to show you my plan.

A little tuning in 2015, you can read about it here:

http://pasztorircheli.blogspot.hu/20...fc-tuning.html

Unfortunately you do not have it in English, the site is constantly updated, but google is our friend. And then it will help.

[modelltomi]

Hi

Finally I started the 600 project. It made it there yet, but it already looks very good.
Although it was very dirty, but it does not matter.
The new HV servos really look good, at least I hope so good as well.






New bearing








https://plus.google.com/u/0/photos/1...93222053342337

[mqowen]

Very nice

[modelltomi]

Thanks!
Ready !!!!













https://plus.google.com/photos/11838...93222053342337

[modelltomi]

The fourth flight of the year.
2150 Rpm Optifuel 30%

Tóth Tamás 600N DFC hard warm up (7 min 51 sec)

[msallua]

Why the landing skids are backwards?
Thanks in advance

[modelltomi]

Because it is more stable the heli.

[msallua]

Thanks. !

[modelltomi]

New video:

T-rex 600N PRO DFC 3D Flight (5 min 2 sec)

[zbird]

Very nice, does anyone know of any USA vendors where I can purchase the motor OP is using? (YS 60 SR) Thank you.