Register Now

Allen Sullivan · 08-03-2009, 05:53 PM

I'm installing the 65MS's, 401 Gyro - however my question is what would you use for the tail servo. The one I was running on my Blade 400 is way to small for the tail servo bracket. What would be a good match for the 401?

Thanks

N0FEAR · 08-03-2009, 05:55 PM

Quote:

Originally Posted by Allen Sullivan

I'm installing the 65MS's, 401 Gyro - however my question is what would you use for the tail servo. The one I was running on my Blade 400 is way to small for the tail servo bracket. What would be a good match for the 401?

Thanks

Futaba 9257 will work and works well when paired with a 401.

Allen Sullivan · 08-03-2009, 06:09 PM

Thanks - I was hoping the one I had would work but I can put 3 of them in the tray. Wasn't sure what would fit in the tray and work with the 401

str8huckin · 08-03-2009, 06:22 PM

Quote:

Originally Posted by N0FEAR

Futaba 9257 will work and works well when paired with a 401.

+1

Buffaloirish · 08-03-2009, 08:17 PM

I'm using the 9650. It fits and seems very solid.

Heli Davey · 08-03-2009, 09:13 PM

I will go with the s9650,never had an issue plus you can run it a 6 volts!!!!

brain · 08-03-2009, 09:32 PM

-agree with all above comments, but if you have time(of course some knowledges

), get the 9650, open the case and after that change the nilon gear of 9650 by the metal gear of 9257(optional). Now you have the tail servo 9257 but running at 6v, very strong and quick!

Allen Sullivan · 08-04-2009, 06:15 AM

Thanks everyone for your help!

08-03-2009, 05:53 PM	#1 (permalink)
Allen Sullivan Registered Users My HF Map location Join Date: May 2009	450 Pro tail servo I'm installing the 65MS's, 401 Gyro - however my question is what would you use for the tail servo. The one I was running on my Blade 400 is way to small for the tail servo bracket. What would be a good match for the 401? Thanks __________________ Allen Trex 550 Trex 500 ESP JR 9503

08-03-2009, 06:09 PM	#3 (permalink)
Allen Sullivan Registered Users Thread Starter My HF Map location Join Date: May 2009	Thanks - I was hoping the one I had would work but I can put 3 of them in the tray. Wasn't sure what would fit in the tray and work with the 401 __________________ Allen Trex 550 Trex 500 ESP JR 9503

08-03-2009, 08:17 PM	#5 (permalink)
Buffaloirish Registered Users Join Date: May 2009	I'm using the 9650. It fits and seems very solid. __________________ ~ Derick ~

08-03-2009, 09:13 PM	#6 (permalink)
Heli Davey Registered Users My HF Map location Join Date: Mar 2009	I will go with the s9650,never had an issue plus you can run it a 6 volts!!!! __________________ TREX 500ESPGY520S9650* TREX 600NSPJR-8717GY520JR-8900G TREX 700N LE91HZDS610GP750DS650COOL POWER 30%DX7

08-03-2009, 09:32 PM	#7 (permalink)
brain Registered Users Join Date: May 2009	-agree with all above comments, but if you have time(of course some knowledges ), get the 9650, open the case and after that change the nilon gear of 9650 by the metal gear of 9257(optional). Now you have the tail servo 9257 but running at 6v, very strong and quick! __________________ -Logo 600SX, Full size Blueline 5.3 + BLS 256 HV, Cyclic Fu BLS 252 powered by Life 2s 6.6 V, HK III 4035 - 500 kv + Vbar Gov, YGE 120 HV

08-04-2009, 06:15 AM	#8 (permalink)
Allen Sullivan Registered Users Thread Starter My HF Map location Join Date: May 2009	Thanks everyone for your help! __________________ Allen Trex 550 Trex 500 ESP JR 9503

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in