assistance

[qjosea]

I will start by a quick introduction, I joined this forum about two days ago, my name is Jose. I love flying helis, I have a Genius CP and purchased separately the WK 2801 Pro. I am having problems finding program that will work correctly. I the heli camw with the manual, but the programming is for a Devo Tx. I purchased everything from www.oomodel.com. I have emailed them and they responded that the programming would work for both, the Devo 6 and the WK 2801 Pro. I would appreciate any assistance from any one who reads this post.



Thanks,

[Intheway]

What are your current TC and PC settings? Are you using expo? Give us a starting point to work from.

[CX2Pilot]

I have setup guides that are for the Genius CP/Mini CP for use with the Devo TX and WK 2801 Pro.


Walkera TX/RX Setup Guides with Pictures and Video

https://www.helifreak.com/showthread.php?t=400204




These setup guides are what you want to use for your Genius CP and WK 2801 Pro.
Just select which difficulty you want. Beginner, Normal, or 3D.


8. Setup for the Walkera Genius CP Helicopter - RX2625H Receiver: WK2801 compatible - Walkera WK-2801 Pro Transmitter.

* Beginner Settings

https://www.helifreak.com/showpost.php?p=...0&postcount=11



15. Setup for the Walkera Genius CP Helicopter - RX2625H Receiver: WK2801 compatible - Walkera WK-2801 Pro Transmitter.

* Normal Settings

https://www.helifreak.com/showpost.php?p=...8&postcount=18



10. Setup for the Walkera Genius CP Helicopter - RX2625H Receiver: WK2801 compatible - Walkera WK-2801 Pro Transmitter.

* 3D Settings
* buildem336 3D Settings

https://www.helifreak.com/showpost.p...4&postcount=13



Tom