Register Now

kchen95 · 07-15-2012, 12:06 PM

Hi all, I just replaced the DX6i transmitter that I had been using to fly my T-rex 500 with a DX8. All the new setups seem ok except I can't seem to get my gyro into headlock mode no matter how high I dial up the gyro gain - as in even 100% seems to make no difference and the gyro remains in rate mode, with the slider returning to center after every left/right rudder input. Am I missing something really obvious?

Best,
Kevin

bstanley72 · 07-15-2012, 01:01 PM

Typically postive numbers are for HH and negative for rate. Since you gone al the way to 100% try using some negative numbers to see if it changes.

Also, are you sure you have the channels mapped corectly? Maybe you can set it all the way to 100% because it's not actually changing the gyro.

07-15-2012, 12:06 PM	#1 (permalink)
kchen95 Registered Users Join Date: Jun 2009	DX8 not putting gyro into headlock mode? Hi all, I just replaced the DX6i transmitter that I had been using to fly my T-rex 500 with a DX8. All the new setups seem ok except I can't seem to get my gyro into headlock mode no matter how high I dial up the gyro gain - as in even 100% seems to make no difference and the gyro remains in rate mode, with the slider returning to center after every left/right rudder input. Am I missing something really obvious? Best, Kevin

07-15-2012, 01:01 PM	#2 (permalink)
bstanley72 Registered Users My HF Map location Join Date: Feb 2011	Typically postive numbers are for HH and negative for rate. Since you gone al the way to 100% try using some negative numbers to see if it changes. Also, are you sure you have the channels mapped corectly? Maybe you can set it all the way to 100% because it's not actually changing the gyro. __________________ Bunch of Planks, DX18, over-inflated sense of self worth! Helis I've had: Trex 500, Compass 500, MCPX, Nano CPX

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in