Walkera Genius CP brushless upgrade parts brushless kit installed in Genius CP

[mh3400]

hello ,
did any one have this Walkera Genius CP brushless upgrade parts brushless kit installed in Genius CP ?

i can't get it works
follow the instruction from the packaging . power up the Tx and Genius. move the throttle up. the main and tail motor does not work ?
what else did i miss ?
cannot find any instruction from Walkera.com

http://www.oomodel.com/walkera-geniu...t-p-62027.html

thanks

[rolledoats]

I just got my brushless kit today. the problem I am having is that the motor is spinning the wrong way. looks like we're both having some bad luck

[dado099]

https://www.helifreak.com/showthread...=391591&page=5

[Magooch]

Originally Posted by mh3400

hello ,
did any one have this Walkera Genius CP brushless upgrade parts brushless kit installed in Genius CP ?

i can't get it works
follow the instruction from the packaging . power up the Tx and Genius. move the throttle up. the main and tail motor does not work ?
what else did i miss ?
cannot find any instruction from Walkera.com

http://www.oomodel.com/walkera-geniu...t-p-62027.html

thanks

I would just upgrade the main motor, the tail doesn't seem to like being brushless and will not hold well. I do not know much about this esc, does heli make noises or light come on esc when plugged in?

Originally Posted by rolledoats

I just got my brushless kit today. the problem I am having is that the motor is spinning the wrong way. looks like we're both having some bad luck

Reverse the wires coming from esc to motor.

[mh3400]

got mine solved.

1) plug in lipo , wait for the heli to power up.
2) once heli power up.
3) move throttle stick to high, hear some beep sound. then
4) move throttle stick to low, hear some beep sound.
5) you are ready to fly .

[previ]

Originally Posted by mh3400

got mine solved.

1) plug in lipo , wait for the heli to power up.
2) once heli power up.
3) move throttle stick to high, hear some beep sound. then
4) move throttle stick to low, hear some beep sound.
5) you are ready to fly .

Glad to hear you solved the problem, have you flown the bird? Be happy to hear on your feedback my brushless conversion is in the post.

[mh3400]

Originally Posted by previ

Glad to hear you solved the problem, have you flown the bird? Be happy to hear on your feedback my brushless conversion is in the post.

to be honest. i don like it. it make the whole heli to heavy. 53grams in total with 1C 300 mah.
two brushless conversion is heavy. i felt no power. cannot find specification on the main motor. not sure about the KV.
sorry , i might take away the tail motor to make it lighter and see how it goes

[mnementh]

Yeah; it's pretty popular opinion here that the Walkera dual brushless setup is lacking at the tailrotor end. The common answer is to keep the stock tail motor & use a tail rotor with more aggressive pitch like the one for the Blade mCP X/2 tail rotor (Blade Part # BLH3603). $1.99 at my LHS, and normally stocked part.

mnem
Rowwwwr!