Beastx AttitudeControl for JR radio

[Masoudgh]

Hello.
Today I installed AttitudeControl update.
So I read all related instruction manual for setup the unit..but there is several problem for me.I will describe you below.please read and help me how to solve them.

1-I install the AttitudeControl ver 4.1.5 of update.
2-Re-setup and parameter menu again.
3-after power on the hell and after initializing,the unit shows heading lock mode(blue LED) and its gain.after a few moments,indicator status LED gets RED and yellow LED is flashing till about 8sec.
4-In the following,after decrease the Gyro gain below than 50,yellow LED will go to the up(to N) depending the Gyro gain value.

My Radio Control is JR XG8 and I used standard receiver.

Now please let me know how can I active or de active AttitudeControl with separated switch? AUX2 is act on my transmitter,but not work!
So How can I adjust AttitudeControl gain separately?

[tdf1946]

You adjust the gain by that channels travel adjust