Parting out my N5c and a few extras.

[Frequency]

The airframe has all of the FLBrotors upgrades, it is in great shape I've taken great care of it. I have a bunch of spare parts that I will include with the airframe. The canopy is the blue and green TT canopy. I had Matt sign it when I met him at our local fun fly last year not sure it adds much value as a potential buyer but I think it is pretty neat. I'm asking 500$ shipped CONUS only (if you live out of the country I will go to the post office and get you a price) I've just started pulling all my spares out of my field cases so I will get a list made up. If you would like me to include a set of Rail 606/96 (mains and tails) I'll throw those in for 50$. Once I've pulled all the electronics and the engine I'll get pictures up with the list of included spares.

Other items I have for sale: (All shipping is Conus and PayPal only please.)

Brand new unopened Ikon v2 - $150 Shipped

Spartan Vx1e with datapod and Spartan Nitro gov sensor. (Was mounted on the N5c only used it maybe 20-25 flights.) $200

Ddmx/Dsm2 adapter for Futaba TXs I built it to use my 14sg with my 180 cfx before I installed the uBrain on it. Works great just have to remap your channels on the model setup. Use your Futaba radio on spectrum BNF. $50

Rail 606/96 (606s have been flown I think the 96s are just out of the package I have 2 sets of these 1 is for the airframe if buyer wants to add on 50$ otherwise) $100 a set.

OS 55hz with Funtech pipe. I have these spares: crankcase, piston ring, piston, sleeve, headgasket,cover gasket, and piston pin retainers. I recently installed new bearings in it too. I've never had this engine give me any trouble starting or running as long as you have the tune right and fuel in the tank. $400

Push-glo (on-board glow plug driver with the add-on LED indicator and the twist lock pigtail) this thing has never let me down I just have a switchglo pro on my N7 so I don't NEED to keep this but I don't want to just give it away I bought the nice twist lock pigtail for it and the LED so I'd let it go for 35$ if no one wants to spend 35$ on it that's OK I'll keep it as backup.

[Frequency]

I'll get photos up today.

[Frequency]

N5c spares:
~2 stock tail bell cranks. (Heli currently equipped with FBLrotors metal upgrade)
~Stock servo links (Heli currently equipped with FBLrotors Titanium turnbuckles)
~1 Head axle
~2 Main gears
~1 Fuel tank
~1 Fuel tank stopper grommet
~1 Fuel tank stopper
~1 Clutch lining
~ Canopy grommets
~ N5 easy mount canopy screws (thought about trying them never got around to it. Heli is equipped with RCbooyas on the back and stock screws in the front.)
~1 Main Shafter
~ Left and Right fan shroud
~ I will also include my printed copy of the Assembly Manual. Great to have at the field if you can't pull it up on your phone or laptop.

[Frequency]

I've pulled all the electronics and links and put all of the links and servo screws in a bag. I'm taking off the little bits of velcro and cleaning up all the nooks and crannies with Q-tips I'll get pictures of the Airframe when it's all pretty.

[Frequency]

Unopened ikon v2
Spartan Vortex Vx1e, Datapod, Gov sensor
Pushglo w/ twist lock pigtail, and Led
Dsmx/Dsm2 Futaba TX adaptor.

[akabek]

Send you a PM for the Ikon

[Frequency]

Snapped a quick photo of the airframe. Been cleaning as I strip it down which is making this take forever. But the engine is about to be pulled and I'll post a picture of it with all the spares and the muffler.

[papamac]

where in Washington are you located?