Register Now

kelseh · 03-26-2012, 01:37 PM

Quote:

Originally Posted by GimpyGolden

Far as I know CC blows with External Govenors, that and the whole bursting into flames bit.
CC is supposed to be revising FW to work with Ext. Gov.
Good Luck.

No personal experience but the hobbywing esc is said to be one of the best with external governors. I have read a lot of posts about this. You might want to use this esc instead of the cc esc. As far as the hobbywing esc it works really well. It just dose not have a great built in governor.

Ermac · 03-26-2012, 01:49 PM

Quote:

Originally Posted by Jeff_Barrett

See post # 73 ....

Ok seein the picture, I see it is incredibly easy to install this hyperion tach lol. Hyperion should include your picture in each their package

Im gonna get solderin and report if I can get her to spin.

Hey Jeff I got my Compass T-Shirt in the mail today awwwwwww dam I loook so pro!

Bob O · 03-26-2012, 02:11 PM

Quote:

Originally Posted by Ermac

I only read half your emails, because only half of them are interesting. Also I was stoned.

Not exactly something one should be proud of.

And to think someone went out of their way to try and help you via email.

Daniel880516 · 03-26-2012, 02:22 PM

Quote:

Originally Posted by Bob O

Not exactly something one should be proud of.

And to think someone went out of their way to try and help you via email.

+1

Ermac · 03-26-2012, 02:52 PM

Hey lets not make a federal case out of it, I'm minding my own business. Too hard for others to do it seems.

NAUGHTY NAUGHTY NAUGHTY!!!!

FYI - I hadn't checked his email till he mentioned in the forum.

MeekaMoMo · 03-26-2012, 03:18 PM

He's quick to ask for help,then ignores what's offered,he dont deserve help.

Marty.

Ermac · 03-26-2012, 03:20 PM

Does the Hyp Tach Have a led light when u power up?

Ermac · 03-26-2012, 03:27 PM

Quote:

Originally Posted by NEAGRON

He's quick to ask for help,then ignores what's offered,he dont deserve help.

Marty.

Are you done derailing my thread yet?

kachur779 · 03-26-2012, 03:59 PM

Quote:

Originally Posted by Ermac

I only read half your emails, because only half of them are interesting. Also I was stoned.

Omg that's funny

kachur779 · 03-26-2012, 04:08 PM

Put the hw on its alote better with the Hyperion phase sensor I think castle has problems using the phase with vbar or sk720 but I could be wrong Just solder a deans on the hw and try it out

Ermac · 03-26-2012, 04:11 PM

I soldered my tach to my red wire just like Jeff's still no acknowledgement beep from high stick or arming beep on low stick. There's no light on the tach itself so now im wondering if I need to go open it up again and redo it.

Found some forums and some videos showing adjustment of travel to gain the beeps no luck so far.

Daniel880516 · 03-26-2012, 04:18 PM

Quote:

Originally Posted by NEAGRON

He's quick to ask for help,then ignores what's offered,he dont deserve help.

Marty.

+1

Ermac · 03-26-2012, 04:22 PM

Quote:

Originally Posted by Daniel880516

+1

Justin Timberlake - Cry Me A River (Official) (4 min 51 sec)

sly the dogman · 03-26-2012, 04:24 PM

To the dude Ermac :

https://www.helifreak.com/showthread.php?t=36194

check it out, its an 85HV not an ICE100 but I think its the same thing to program
I have a CC75A, that's how I learned to program mine, take a look.

Ermac · 03-26-2012, 04:30 PM

Finless saves the day again.
I like it when he says you have to grab your balls.
TY for link it's perfect!

Ermac · 03-26-2012, 04:38 PM

Should I use the Gov in Sk720, in the Ice 100, or not at all ?

Ermac · 03-26-2012, 04:43 PM

Dam i prolly have to buy that castle link connect software again....

Jeff_Barrett · 03-26-2012, 04:56 PM

The SK720 governor is excellent, especially with the Hyperion Tach phase sensor.

I don't recall if there is a light on the tach sensor or not, mine is fairly hidden now, and I never really paid it much mind...

I would try the HW ESC before you try anything else.

kelseh · 03-27-2012, 12:29 AM

Try your hobbywing esc. It is known to work excellent with the phase sensor. The cc esc is not.

Ermac · 03-27-2012, 05:41 AM

Is there a way I can just reset the CC Esc to the same state as when I bought it? Coz it was armed before, but some weird thing in Throttle Setup of my Gyro "Unarmed" it..

What is the ring on the wire that goes to RX on both esc there is a ring that the wire is wrapped around.

03-26-2012, 03:18 PM	#26 (permalink)
MeekaMoMo Registered Users Join Date: Mar 2009	waste of time He's quick to ask for help,then ignores what's offered,he dont deserve help. Marty.

03-26-2012, 04:08 PM	#30 (permalink)
kachur779 Registered Users Join Date: Mar 2011	Put the hw on its alote better with the Hyperion phase sensor I think castle has problems using the phase with vbar or sk720 but I could be wrong Just solder a deans on the hw and try it out __________________ BLACKOUT MINI,ZMR 250,TBS Discovery ,Zephyr 2 TARANIS X9D + ,ez-uhf jr mod *GauiX5 Gauix3*

03-26-2012, 04:24 PM	#34 (permalink)
sly the dogman Registered Users Join Date: May 2009	To the dude Ermac : https://www.helifreak.com/showthread.php?t=36194 check it out, its an 85HV not an ICE100 but I think its the same thing to program I have a CC75A, that's how I learned to program mine, take a look. __________________ We do accept FB parts for Compass 5.5

03-27-2012, 12:29 AM	#39 (permalink)
kelseh Registered Users Join Date: May 2010	Try your hobbywing esc. It is known to work excellent with the phase sensor. The cc esc is not. __________________ Blade 550x, Atom 500 FBL, Trex 450 Pro FBL, DX8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-26-2012, 02:52 PM	#25 (permalink)
Ermac Registered Users Thread Starter Join Date: Apr 2009	Hey lets not make a federal case out of it, I'm minding my own business. Too hard for others to do it seems. NAUGHTY NAUGHTY NAUGHTY!!!! FYI - I hadn't checked his email till he mentioned in the forum.

03-26-2012, 03:20 PM	#27 (permalink)
Ermac Registered Users Thread Starter Join Date: Apr 2009	Does the Hyp Tach Have a led light when u power up?

03-26-2012, 04:11 PM	#31 (permalink)
Ermac Registered Users Thread Starter Join Date: Apr 2009	I soldered my tach to my red wire just like Jeff's still no acknowledgement beep from high stick or arming beep on low stick. There's no light on the tach itself so now im wondering if I need to go open it up again and redo it. Found some forums and some videos showing adjustment of travel to gain the beeps no luck so far.

03-26-2012, 04:30 PM	#35 (permalink)
Ermac Registered Users Thread Starter Join Date: Apr 2009	Finless saves the day again. I like it when he says you have to grab your balls. TY for link it's perfect!

03-26-2012, 04:38 PM	#36 (permalink)
Ermac Registered Users Thread Starter Join Date: Apr 2009	Should I use the Gov in Sk720, in the Ice 100, or not at all ?

03-26-2012, 04:43 PM	#37 (permalink)
Ermac Registered Users Thread Starter Join Date: Apr 2009	Dam i prolly have to buy that castle link connect software again....

03-26-2012, 04:56 PM	#38 (permalink)
Jeff_Barrett Registered Users Join Date: Aug 2010	The SK720 governor is excellent, especially with the Hyperion Tach phase sensor. I don't recall if there is a light on the tach sensor or not, mine is fairly hidden now, and I never really paid it much mind... I would try the HW ESC before you try anything else.

03-27-2012, 05:41 AM	#40 (permalink)
Ermac Registered Users Thread Starter Join Date: Apr 2009	Is there a way I can just reset the CC Esc to the same state as when I bought it? Coz it was armed before, but some weird thing in Throttle Setup of my Gyro "Unarmed" it.. What is the ring on the wire that goes to RX on both esc there is a ring that the wire is wrapped around.

Register Now

Log-in