Register Now

mat081278 · 11-30-2015, 05:40 PM

I am going to do some winter maintenance on my 700 XXtrem.
Does anybody known the size of the blade holder bearings size ?
I mean not the trust bearings, the radials ones.

Best regards.

rcmarty · 11-30-2015, 11:18 PM

10 x 19 x 5

Mikado # 01329

https://shop.mikadousa.com/01329-Bal...19x5_p_28.html

Use heat to get them out , much easier

Martin

mat081278 · 12-01-2015, 12:58 AM

Thanks a lot.

rcmarty · 12-01-2015, 01:00 AM

Those should be the right ones.

If your ordering from the us , to be sure pull one out and measure it.

Martin

11-30-2015, 05:40 PM	#1 (permalink)
mat081278 Registered Users Join Date: Jul 2011	Blade Holder bearings size I am going to do some winter maintenance on my 700 XXtrem. Does anybody known the size of the blade holder bearings size ? I mean not the trust bearings, the radials ones. Best regards.

11-30-2015, 11:18 PM	#2 (permalink)
rcmarty Registered Users Join Date: May 2006	10 x 19 x 5 Mikado # 01329 https://shop.mikadousa.com/01329-Bal...19x5_p_28.html Use heat to get them out , much easier Martin __________________ Logo XXtreme 800 8917 / 256HV VBC Logo XXtreme 700 on 14s 8917 / 256HV VBC NEO Logo XXtreme 770 14s 8917/9188 VBC Logo 600 8917/ 9188 4035-500 VBC NEO

12-01-2015, 01:00 AM	#4 (permalink)
rcmarty Registered Users Join Date: May 2006	Those should be the right ones. If your ordering from the us , to be sure pull one out and measure it. Martin __________________ Logo XXtreme 800 8917 / 256HV VBC Logo XXtreme 700 on 14s 8917 / 256HV VBC NEO Logo XXtreme 770 14s 8917/9188 VBC Logo 600 8917/ 9188 4035-500 VBC NEO

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-01-2015, 12:58 AM	#3 (permalink)
mat081278 Registered Users Thread Starter Join Date: Jul 2011	Thanks a lot.

Register Now

Log-in