Gorilla Gear on the Mini Titan

[jgiot]

I recieved my gorilla gear today,

will try it out and let you all know how the landing gear, paddles and tail do.

[doeni]

Gear and Paddles work fine on the MT great stuff

[RCHeliJim]

I have had both the gear and the paddles on my Mini Titan for quite a while now and they work very well

[trexzznl]

is it a direct fit? no mods needed? pics?

[doeni]

You need to do new holes in the Gear, the holes are a few mm to near together to fit in standard version.

But just drill one new hole and it works great

greetings

[LITHIUMSTATIC]

Originally Posted by doeni

You need to do new holes in the Gear, the holes are a few mm to near together to fit in standard version.

But just drill one new hole and it works great

greetings

I've heard the same thing from others. I will buy a set soon.

[txflyer]

if you have a cp or cpp with superskids, that you dont fly anymore. the skids fit my trex, they have 3 or 4 holes on each side of the skids. the middle small hole lined up perfectly with the trex skid mounts..

thought id throw that out there and maybe save some one a few bucks...

[henrik04]

Yep! Gorilla gear flybar paddles and landing gear. I hold the gorilla gear landing strut with a rubber bands when not flying. I insure that the back is more tight (therefore a bit higher than the front.) When flying I remove the rubber bands, of course. This gives the E-325 a tail a bit higher, just enough to always have the front touching ground first..

[fixxxer]

Is that not a little tail heavy ?

[henrik04]

Not really tail heavy. The grass makes it look that way. Tail is made of 2xPV0824 'araldite' together. With Flightpower 2,500 mAH and 2S 1,050mAH for servos, Rx and Gy401 gyro through a softerm BEC I get a nearly perfect centre of gravity.