Post your T-Rex 550 videos here!

[Ed Olson]

Thanks for the tip. I'll add them in the cart next time I go shopping which won't be long because a couple days ago after I get all the way through set up I realize I have no vertical tail fin.
Thought about fabricating one for now but have I come to realize that waiting for a tail proper is the best idea, I also have a coworker who is going to give a go at an unpainted canopy for me.
So for now, the new Gens Ace packs sit waiting for their first charge.
I did spool up enough to check TH, correct rudder direction, and check for low res vibes. All checks out for now.

Not a fan of the waiting game my good fellows......

[Pilot JJ]

550L Dominator "Pilot JJ"


Great time in Flaming Geyser Flyers !!

[overx]

Video not loading for me

Wysłane z mojego Redmi 3S przy użyciu Tapatalka

[xrayray]

Today's first video attempt

Trex 550e 3D flight (3 min 14 sec)

[chrisflies300xl]

looking for a good video or tips on replacing motor bearings and shaft. I removed set screws at top of motor shaft and tried to push shaft out with arbor press but shaft is not moving. I guess the next step would to heat motor in the oven to 200 degrees ?

[Helithunder]

align t-rex 550x dominator super combo (4 min 32 sec)

[denis747]

Trex 550X relaxing flight (6 min 3 sec)

[Helithunder]

sharing a flight from last summer

align t-rex 550x dominator tuning flight (4 min 15 sec)

[Helithunder]

slow baby steps in my progression

align 550x dominator (4 min 47 sec)

[Helithunder]

Sharing a flight from last summer

Align 550x Dominator just flying (4 min 55 sec)

[tonys-heli]

I don’t get why you need that high of a head speed for the flying that you’re doing.. if you lower the head speed, you get two more minutes of flight.

[Helithunder]

Originally Posted by tonys-heli

I don’t get why you need that high of a head speed for the flying that you’re doing.. if you lower the head speed, you get two more minutes of flight.

I guess the only way I can answer your question is I like flying the way I do...might have to give this lower head speed stuff a try next spring tho,thanks for watching!

[Trashley]

Trex 550x on 3s 2200mah 25c, 600mm blades, 1200 rpm.

Trex 550x on a 3s 2200ma pack. 600mm blades. (7 min 1 sec)

[Helithunder]

Just cruising around

Align 550x Dominator (5 min 2 sec)

[Helithunder]

Sharing a recent flight of my 550X:

ALIGN 550X DOMINATOR (4 min 11 sec)