Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > E-Sky Helicopters > Belt CP


Belt CP E-Sky Belt CP


Reply
 
Thread Tools Display Modes
Old 11-26-2008, 04:01 PM   #21
Jonnyheli
Registered Users
 
Posts: 5,403
Thread Starter Thread Starter
 

Join Date: Mar 2008
Location: Wales, UK
Default

Quote:
Originally Posted by sutty View Post
What's wrong with hence, it's a perfectly cromulent word!
Hence why you used the word hence

-Jonny
__________________
Spektrum DX7, Align Trex 250se, Align Trex 500cf, Align Trex 600n LE
Jonnyheli is offline        Reply With Quote
Old 12-29-2008, 10:51 AM   #22
Jonnyheli
Registered Users
 
Posts: 5,403
Thread Starter Thread Starter
 

Join Date: Mar 2008
Location: Wales, UK
Default

Ok, i've had enough of the tp 610C not being in stock so I have made a stupid decision to go with the 1010C (I am going to chip in some of my money obviously)

My question is (To Grant or anyone with a 1010C charger) Does the 1010C come with the red and black (pos and neg) leads that fit into the power supply (Not the crocodile clips)

And another question. The power supply I bought origionally for the 610C http://www.cmfhobbies.com/ULTRAPOWER...-240V/1032.htm will still be ok with the 1010C charger right? (Sorry, I am a complete noob at this)

I figure getting the best one will be better for me anyway.

Thanks in advance.

-Jonny
__________________
Spektrum DX7, Align Trex 250se, Align Trex 500cf, Align Trex 600n LE
Jonnyheli is offline        Reply With Quote
Old 12-29-2008, 03:48 PM   #23
Jonnyheli
Registered Users
 
Posts: 5,403
Thread Starter Thread Starter
 

Join Date: Mar 2008
Location: Wales, UK
Default

Bump ^^

-Jonny
__________________
Spektrum DX7, Align Trex 250se, Align Trex 500cf, Align Trex 600n LE
Jonnyheli is offline        Reply With Quote
Old 01-13-2009, 08:31 AM   #24
Jonnyheli
Registered Users
 
Posts: 5,403
Thread Starter Thread Starter
 

Join Date: Mar 2008
Location: Wales, UK
Default

Grant!!!!!!!!!!!!!!!! I need your help/advice.

I sent the tp 1010C back for a bantam BC6-10 and quess what. They have only gone and sent back the tp 1010C to me! What a waste of postage money! I might aswell have just bought the 210C balancer.

I am just going to try and ask him if I can buy a 210C with money off or something because I have been waiting for a charger from about 3 weeks before christmas.

I cannot believe how unlucky I am sometimes.

Ok so my questions are. Shall I go ahead with sending it back again (Lot's of hassel etc and more money on postage again) Or shall I try and get the 210 for cheaper (I mean a lot cheaper, I am pee'd off)

Also, if you have a trex 600N why have you got a 1010C. If for some reason you need a powerful charger for a 600N then I will stick with this because my plans are for a 600N in the future. But I doubt I would need this charger for a 600N because I don't need a big pack just to power the reciever and servos etc.

And with this charger not only do you have to plug the pack's balancer wires into the charger you have to plug the deans into the charger too! Why.

Thanks Grant Or anyone who knows alot obout the 1010C.

-Jonny

EDIT: Never mind. The guy at fast-lad rang me up and said he could get the bantam to me by tomorrow and to give the 1010C to the post man and he will post it back lol

-Jonny
__________________
Spektrum DX7, Align Trex 250se, Align Trex 500cf, Align Trex 600n LE

Last edited by Jonnyheli; 01-13-2009 at 11:01 AM..
Jonnyheli is offline        Reply With Quote
Old 01-13-2009, 11:08 AM   #25
Heli Yea!
Registered Users
 
Posts: 4,463
 
My HF Map location
Join Date: Jun 2008
Location: Denver, CO
Default

The charge goes into the pack through the deans and it discharges through the balance plug to balance the cells.

If I were you Jonny I would send an email to the seller and explain what happened. Let them know you are upset(nicely) and allow them to suggest a remedy. Make sure that they understand that you are a valued customer and that you would like to continue business with them in the future but they will need to have a good remedy for your want to continue business. Decide what you really want and make sure that they know what you really want. Also be sure that they know that you will share the word of their customer service with others weather good or bad through forums which many people read. So that they are fully aware that one person makes a HUGE difference. Remember to BE NICE do not rant or rage! Be the better man and the best will come to you!
__________________
-Heli Yea!
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Master of: the living room, stockTx, mechanical setup and, the obvious!
Belt'ish CP FBL, HDX 500 DFC, New V120D02S FBL, Mini CP FBL, Hirobo Shuttle ZX, 450 DFC, QR-X350PRO FPV, 450 FPV(in progress) DEVO 10 white 2km range!
Heli Yea! is online now        Reply With Quote
Old 01-13-2009, 11:52 AM   #26
Jonnyheli
Registered Users
 
Posts: 5,403
Thread Starter Thread Starter
 

Join Date: Mar 2008
Location: Wales, UK
Default

Quote:
Originally Posted by Heli Yea! View Post
The charge goes into the pack through the deans and it discharges through the balance plug to balance the cells.

If I were you Jonny I would send an email to the seller and explain what happened. Let them know you are upset(nicely) and allow them to suggest a remedy. Make sure that they understand that you are a valued customer and that you would like to continue business with them in the future but they will need to have a good remedy for your want to continue business. Decide what you really want and make sure that they know what you really want. Also be sure that they know that you will share the word of their customer service with others weather good or bad through forums which many people read. So that they are fully aware that one person makes a HUGE difference. Remember to BE NICE do not rant or rage! Be the better man and the best will come to you!
Hey Chad didn't you see the edit?
Quote:
Originally Posted by Jonnyheli View Post
EDIT: Never mind. The guy at fast-lad rang me up and said he could get the bantam to me by tomorrow and to give the 1010C to the post man and he will post it back lol
-Jonny
I did email him first "Nicely" Firstly because if I am not very nice in the email the website would not be such a good service to me and secondly. I have bought many suttf off them and they are a great shop. I will still keep buying from them. Everyone makes mistakes, he accidentally sent me the wrong one back. Anyway, I will be getting the bantam tomorrow which was why I was so frustrated because I thought it would be another week with no charger

-Jonny
__________________
Spektrum DX7, Align Trex 250se, Align Trex 500cf, Align Trex 600n LE
Jonnyheli is offline        Reply With Quote
Old 01-13-2009, 11:59 AM   #27
Heli Yea!
Registered Users
 
Posts: 4,463
 
My HF Map location
Join Date: Jun 2008
Location: Denver, CO
Default

Good news is you got it sorted! Bad news is I'm going blind!
__________________
-Heli Yea!
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Master of: the living room, stockTx, mechanical setup and, the obvious!
Belt'ish CP FBL, HDX 500 DFC, New V120D02S FBL, Mini CP FBL, Hirobo Shuttle ZX, 450 DFC, QR-X350PRO FPV, 450 FPV(in progress) DEVO 10 white 2km range!
Heli Yea! is online now        Reply With Quote
Old 01-13-2009, 01:15 PM   #28
Jonnyheli
Registered Users
 
Posts: 5,403
Thread Starter Thread Starter
 

Join Date: Mar 2008
Location: Wales, UK
Default

Quote:
Originally Posted by Heli Yea! View Post
Good news is you got it sorted! Bad news is I'm going blind!
Lol, nah. There was a lot to read

-Jonny
__________________
Spektrum DX7, Align Trex 250se, Align Trex 500cf, Align Trex 600n LE
Jonnyheli is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > E-Sky Helicopters > Belt CP


Belt CP E-Sky Belt CP

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com