Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Hirobo Nitro Helicopters > Hirobo Electric Helicopters


Hirobo Electric Helicopters Hirobo Lepton EX, Quark and other Electric Helicopters


Reply
 
Thread Tools Display Modes
Old 06-22-2006, 12:13 AM   #1
buster1
Registered Users
 
My HF Map location
Join Date: Dec 2004
Location: Manhattan
Default most potent 3D combo

Guys, I am planning on using the following in the Lepton,
1. Motor - Hyperian
2. Battery - HYPERION LITESTORM VX3700-4S (14.8 VOLT) LIPOLY PACK
3. ESC - Align 75 amp

Question - I am looking for an aggressive 3D setup - this has been recommended to me by the store I am buying from - but I know this heli. is new and the setup data is just coming in.

What are you opinions - finless bob, was do you think? Before I got out and buy these batteries, any suggestions - I hear some guys are thinking 5S

I am hoping that with the setup listed above, I can get 6 minutes of strong 3D

Any help would be appreciated,
JH
buster1 is offline        Reply With Quote
Old 06-22-2006, 01:31 AM   #2
Finless
Team Taco VP
 
Posts: 34,250
 
My HF Map location
Join Date: Nov 2005
Location: Stanton, Ca. USA
Default

You got what I am going to be using for 4S
Exact same setup for 4s and batts......

I think it will be good but really I wont know until I get there!

Bob
Finless is offline        Reply With Quote
Old 06-22-2006, 06:12 AM   #3
rchover
Registered Users
 
Posts: 299
 

Join Date: Oct 2005
Location: 30 miles south of boston
Default

that's what I'm going to start with too, but there is pleanty of motor combos to experiment with , I do want to try a 5s 3700 mha setup with the same motor / smaller gear or a lower kv and same gearing ... should be KILLER

I also already have a range of medusa
028-056-900/1400/1900kv's motors that I'm going to try out with 4s and 5s ..I do have a good selection of 1/8th inch bore pinions for the medusa's from 12t up to 24t ...it will be interesting to see if a small pinioned motor can fit in the lepton ...we shall see soon... ...

you gotta love a new toy!!
__________________
"Gotta Fly Every Day"
Jeremy
www.HobbyQuarters.com
www.rchover.com
www.FpvExpert.com
rchover is offline        Reply With Quote
Old 06-22-2006, 11:24 AM   #4
supertrex2
Registered Users
 

Join Date: May 2006
Location: Florida
Default

The Medusa 3400 will work with Lepton?

Hope they make one for Trex600
__________________
oh ohh its going down...S$%#T...relax.. relax.... concentrate......try to control.. oooops too late... already crashed!
supertrex2 is offline        Reply With Quote
Old 06-22-2006, 05:48 PM   #5
buster1
Registered Users
Thread Starter Thread Starter
 
My HF Map location
Join Date: Dec 2004
Location: Manhattan
Default

Jeremy, its Jeff from NY - when or have you tried the 5S setup - please let us know what you come up with,
Jeff
buster1 is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Hirobo Nitro Helicopters > Hirobo Electric Helicopters


Hirobo Electric Helicopters Hirobo Lepton EX, Quark and other Electric Helicopters

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2015 by RCGroups.com, LLC except where otherwise indicated. The HeliFreak.com logo is a trademark of RCGroups.com, LLC.