Feathering shaft shims

welfordnremt · 04-26-2009, 08:14 PM

Before you beat me up, I searched and can't find it. I know I have read it, just don't remember. Someone has said what size washers the shims are so that you don't have to by the eflite ones.

Wolfpackin · 04-26-2009, 08:32 PM

I've been around for a while and I've never actually seen another source for those shims.

I'm curious to see if someone comes back with something.

welfordnremt · 04-26-2009, 08:37 PM

I'll let ya know as soon as I find out. I know its here gonna keep searching and see if I find it.

Cailid · 04-26-2009, 11:38 PM

The shims are 2x3x0.1mm

fast400 · 04-27-2009, 12:14 AM

when i got the complete hardware kit for the 400, it only had the step washers in it.
no shims for the feathering shaft.
wonder why they give you the stepwasher`s but no shims

04-26-2009, 08:14 PM	#1
welfordnremt Registered Users Join Date: Feb 2009 Location: Petal Ms	Feathering shaft shims Before you beat me up, I searched and can't find it. I know I have read it, just don't remember. Someone has said what size washers the shims are so that you don't have to by the eflite ones.

04-26-2009, 08:32 PM	#2
Wolfpackin HF Support My HF Map location Join Date: Nov 2007 Location: Eagle, CO	I've been around for a while and I've never actually seen another source for those shims. I'm curious to see if someone comes back with something. __________________ Zen and the Art of Helicopter Maintenance Blade 400: E-flite 420H/35X ESC, AR6100e, HS65HB x 3, G401B/DS290G. (Ret.) CopterX 450AE V2: 430XL/35X ESC, AR6100, HS65HB x 3, LTG2100T/HSG-5084MG. T-Rex 550E V1 Classic Flybar: 600MX/BL70G, AR6200, DS610 x 3, Quark/DS650, 16t/520mm blades.

04-26-2009, 11:38 PM	#4
Cailid Registered Users Join Date: Feb 2009 Location: Abbotsford B.C.	The shims are 2x3x0.1mm __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. MCX, CX2, MSR Blade 400, 500ESP, 500CF

04-27-2009, 12:14 AM	#5
fast400 Registered Users My HF Map location Join Date: Feb 2009 Location: michigan	when i got the complete hardware kit for the 400, it only had the step washers in it. no shims for the feathering shaft. wonder why they give you the stepwasher`s but no shims __________________ Crashs come easy Patience does`nt To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. retired the 3 year old blade400

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-26-2009, 08:37 PM	#3
welfordnremt Registered Users Thread Starter Join Date: Feb 2009 Location: Petal Ms	I'll let ya know as soon as I find out. I know its here gonna keep searching and see if I find it.