Joined the club, I Got a 700E!

Mr Nice Guy · 07-19-2009, 12:24 AM

I just recently bought a 700E conversion from Bobby Smith at RRemodels. This was his personal bird and it just flies awesome! I can't get over how great these big guys fly. It was quite a step up from my stretched Logo 10 that's for sure. Here are the Specs, T-rex 700 with the Helidirect conversion, RJX Flybarless head, V-Bar, 8717s for swash, FUT 9256 tail, Scorpion 4035 560KV, Castle HV 85, Rotortech mains and tail blades. This thing is a monster. This is also my first flybarless. I'm so stoked about this bird I just had to share with everyone. I'll try and get some pics up soon.

GenReaper · 07-19-2009, 12:38 AM

What pinion is it running 14 tooth?
Or is it Mod 1 setup?

Bear in mind alot of guys are going to the 500Kv motor and running larger pinions for more mesh contact area cause the main gear has a habbit of stripping with the smaller tooth pinion, so be carefull cause it generaly will go when least expected. Hope your Auto skills are up to scratch

Just a heads up mate, otherwise sound like a great setup.

Mr Nice Guy · 07-19-2009, 09:15 AM

Yes it is running the 14 tooth. Mesh is quite close as well. So far no problems.

07-19-2009, 12:24 AM	#1
Mr Nice Guy Registered Users Join Date: Mar 2007 Location: Melbourne, FL	Joined the club, I Got a 700E! I just recently bought a 700E conversion from Bobby Smith at RRemodels. This was his personal bird and it just flies awesome! I can't get over how great these big guys fly. It was quite a step up from my stretched Logo 10 that's for sure. Here are the Specs, T-rex 700 with the Helidirect conversion, RJX Flybarless head, V-Bar, 8717s for swash, FUT 9256 tail, Scorpion 4035 560KV, Castle HV 85, Rotortech mains and tail blades. This thing is a monster. This is also my first flybarless. I'm so stoked about this bird I just had to share with everyone. I'll try and get some pics up soon. __________________ Knock on the sky and listen to the sound

07-19-2009, 12:38 AM	#2
GenReaper Registered Users Join Date: Apr 2008 Location: Australia, Adelaide.	What pinion is it running 14 tooth? Or is it Mod 1 setup? Bear in mind alot of guys are going to the 500Kv motor and running larger pinions for more mesh contact area cause the main gear has a habbit of stripping with the smaller tooth pinion, so be carefull cause it generaly will go when least expected. Hope your Auto skills are up to scratch Just a heads up mate, otherwise sound like a great setup. __________________ Trex 700E 12S Scorpion 4035-500 3DX SK360 Spartan 760 CC110 Trex 600E 10S Scorpion 4025-740 FBL SK360 Spartan 760 CC85

07-19-2009, 09:15 AM	#3
Mr Nice Guy Registered Users Thread Starter Join Date: Mar 2007 Location: Melbourne, FL	Yes it is running the 14 tooth. Mesh is quite close as well. So far no problems. __________________ Knock on the sky and listen to the sound

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode