US based CNC routing service????

Aussie_G · 07-20-2009, 06:41 PM

Do any of you guys offer routing service???

I want to get a few pieces cut..
i have a DXF file ready to go, I could even provide the g-code if necessary

life2short1971 · 07-20-2009, 10:49 PM

this has been covered before...There are several companies that cater to th indidvidual wanting just a few pieces made.You have to catch them when they run promo specials though or they can be rather pricey. I will see if I can remeber a name or two.

life2short1971 · 07-20-2009, 10:59 PM

This is the only one I could remeber people having success with reasonably.
http://www.emachineshop.com/index.ph...FQJSxwodVA5q4g

TMoore · 07-21-2009, 10:08 PM

What material and how thick?

TM

Aussie_G · 07-22-2009, 07:16 AM

2.0mm G-10....

TMoore · 07-22-2009, 08:46 AM

What's the length and width of the largest part?

TM

Aussie_G · 07-22-2009, 09:24 AM

i dont have the numbers in front of me, but I believe it is approx 7" x12"

Skiddz · 07-24-2009, 06:08 PM

www.matrixenterprises.com. They specialize in one-off and small production runs.

My 2 Cents · 07-24-2009, 07:19 PM

www.ippdllc.com Same type of place as what Skiddz said, just another option.

cgbole · 10-26-2009, 10:47 PM

One of my flying buddies can cut some stuff out with a CNC router at his work.. It will accept up to 4foot by 8 foot material..
He cut these out for me...

07-20-2009, 06:41 PM	#1
Aussie_G Registered Users Join Date: Mar 2008 Location: Woodruff, South Carolina, USA	US based CNC routing service???? Do any of you guys offer routing service??? I want to get a few pieces cut.. i have a DXF file ready to go, I could even provide the g-code if necessary __________________ Outrage R/C - Enter The Rage! There are only two ways to fly - my way and the right way

07-20-2009, 10:49 PM	#2
life2short1971 Registered Users Join Date: Jan 2009 Location: Fort White,Florida	this has been covered before...There are several companies that cater to th indidvidual wanting just a few pieces made.You have to catch them when they run promo specials though or they can be rather pricey. I will see if I can remeber a name or two. __________________ Scott Trex 500 / /3026-1600/CC Ice75 /3G /Ds510's/Torsion 430 fbl's Trex 450 pro/HK2221-8/ Ice 50 /HS-5065MG/325D's/Kbdd's

07-20-2009, 10:59 PM	#3
life2short1971 Registered Users Join Date: Jan 2009 Location: Fort White,Florida	This is the only one I could remeber people having success with reasonably. http://www.emachineshop.com/index.ph...FQJSxwodVA5q4g __________________ Scott Trex 500 / /3026-1600/CC Ice75 /3G /Ds510's/Torsion 430 fbl's Trex 450 pro/HK2221-8/ Ice 50 /HS-5065MG/325D's/Kbdd's

07-22-2009, 07:16 AM	#5
Aussie_G Registered Users Thread Starter Join Date: Mar 2008 Location: Woodruff, South Carolina, USA	2.0mm G-10.... __________________ Outrage R/C - Enter The Rage! There are only two ways to fly - my way and the right way

07-22-2009, 09:24 AM	#7
Aussie_G Registered Users Thread Starter Join Date: Mar 2008 Location: Woodruff, South Carolina, USA	i dont have the numbers in front of me, but I believe it is approx 7" x12" __________________ Outrage R/C - Enter The Rage! There are only two ways to fly - my way and the right way

07-21-2009, 10:08 PM	#4
TMoore Registered Users Join Date: Apr 2004 Location: Cookeville, TN	What material and how thick? TM

07-22-2009, 08:46 AM	#6
TMoore Registered Users Join Date: Apr 2004 Location: Cookeville, TN	What's the length and width of the largest part? TM

07-24-2009, 06:08 PM	#8
Skiddz HF Support My HF Map location Join Date: May 2006 Location: Carlsbad, CA (USA)	www.matrixenterprises.com. They specialize in one-off and small production runs. __________________ -Kevin No helicopters were harmed in the creation of this post. AMA CD # 7309, Turbine Waiver# RW 890 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-24-2009, 07:19 PM	#9
My 2 Cents Registered Users Join Date: Jul 2008 Location: USA	www.ippdllc.com Same type of place as what Skiddz said, just another option.

10-26-2009, 10:47 PM	#10
cgbole Registered Users My HF Map location Join Date: May 2004 Location: Tulsa Ok.	One of my flying buddies can cut some stuff out with a CNC router at his work.. It will accept up to 4foot by 8 foot material.. He cut these out for me... __________________ Team Synergy Thunder Power Esprit Model Scorpion

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode