Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopters > Main Forum - Helicopter Talk


Main Forum - Helicopter Talk R/C Helicopters and the people who fly them. VENDOR TOPICS DO NOT GO HERE. Full Scale Heli threads go in OT please


Reply
 
Thread Tools Display Modes
Old 09-03-2009, 02:30 AM   #1
wws2010
Registered Users
 
Posts: 323
 

Join Date: Mar 2008
Location: Los Angles
Default EXI Servos! Check them out!

Hey I have been looking for a new set of servos and am on a budget. I have seen these exi servos with crazy specs and very cheap. I have yet to have any word on them at all, good or bad. I really would like to not jump into a purchase but the specs are insane. Metal geared, .15 at 180 oz torque for 20 bucks. Also one is at .9 at 111 oz. Please let me know!

D113F Digital 9 .32 0.13 1.6 22.2 22.6x11.4x22.2 .89x.45x.87 4.8 M20S Nylone Bearing
D213F Digital 9 0.32 0.13 1.6 22.2 22.6x11.4x22.2 .89x.45x.87 4.8 M20S Metal Bearing
D125F Digital 43 1.5 0.22 5 69.4 39.3x19.4x38.7 1.54x.76x1.52 6 020 Nylone Bearing
D126F Digital 43 1.5 0.17 4 55.5 39.3x19.4x38.7 1.54x.76x1.52 6 020 Nylone Bearing
D121F Digital 37 1.3 0.22 8 111.1 39.3x19.4x38.7 1.54x.76x1.52 6 030 Nylone Bearing
D122F Digital 37 1.3 0.17 6 83.3 39.3x19.4x38.7 1.54x.76x1.52 6 030 Nylone Bearing
D123F Digital 50 1.76 0.2 8.5 118 39.3x19.4x38.7 1.54x.76x1.52 6 030 Metal Bearing
D124F Digital 50 1.76 0.17 6.5 90.3 39.3x19.4x38.7 1.54x.76x1.52 6 030 Metal Bearing
D226F Digital 60 2.1 0.15 13 180.5 39.3x19.4x38.7 1.54x.76x1.52 6 Coreless Metal Bearing
D227F Digital 60 2.1 0.09 8 111.1 39.3x19.4x38.7 1.54x.76x1.52 6 Coreless Metal Bearing
B1221 Standard 43 1.5 0.23 4.5 62.5 39.3x19.4x38.7 1.54x.76x1.52 6 020 Nylone Bearing
B1222 Standard 43 1.5 0.18 3 41.7 39.3x19.4x38.7 1.54x.76x1.52 6 020 Nylone Bearing
B1226 Standard 120 4.2 1.3/360 11 152.8 58x28x52 2.29x1.10x2.05 6 370 Nylone Bearing
B1227 Standard 115 4.0 0.16 11 152.8 58x28x52 2.29x1.10x2.05 6 370 Nylone Bearing
B1228 Standard 125 4.4 0.16 15 208.3 58x28x52 2.29x1.10x2.05 6 370 Metal Bearing

Last edited by wws2010; 09-03-2009 at 08:46 PM..
wws2010 is offline        Reply With Quote
Old 09-03-2009, 08:46 PM   #2
wws2010
Registered Users
 
Posts: 323
Thread Starter Thread Starter
 

Join Date: Mar 2008
Location: Los Angles
Default

No One?
wws2010 is offline        Reply With Quote
Old 09-03-2009, 10:10 PM   #3
M.Huerta
Registered Users
 
Posts: 1,042
 

Join Date: Jun 2008
Location: Gilbert,AZ
Default

IMO servos are NOT something that you wanna go cheap with on a heli, they are the most important component and you do not want to risk them. Just my .02
__________________
GAUI 425 - HK3026-1600, Phoenix 80, HS-5245MG's, GY520, DS20GMD, Hitec Optima 7 Rx.
M.Huerta is offline        Reply With Quote
Old 09-04-2009, 12:32 AM   #4
carlobee
 

Join Date: Jul 2009
Location: cdo
Default

Quote:
Originally Posted by M.Huerta View Post
IMO servos are NOT something that you wanna go cheap with on a heli, they are the most important component and you do not want to risk them. Just my .02
i agree to this one.

carlobee is offline        Reply With Quote
Old 09-04-2009, 03:30 AM   #5
JimDeadly
Registered Users
 
Posts: 159
 

Join Date: Jul 2009
Location: South Georgia
Default

The price difference between a set of 3 d213 exi and a set of hs-5065's is only about $30-$40.

If anything goes wrong with the exi it becomes throw away. With the hitec's you get a hella warranty and/or lots of parts availability if you smash them...

I switched from exi d213's to 65's in my blueray and though they are rated the same speed, the hitecs feel way faster and seem to center way better.

Could just be me, but I definitely feel it is worth it for servos that will be with you for a long time whether the servo fails or is "assisted" in failing.
JimDeadly is offline        Reply With Quote
Old 09-04-2009, 06:33 AM   #6
eugeneflorida
Registered Users
 
Posts: 37
 
My HF Map location
Join Date: Aug 2009
Location: florida
Default

Do you have a web site with prices and shipping?


Quote:
Originally Posted by wws2010 View Post
Hey I have been looking for a new set of servos and am on a budget. I have seen these exi servos with crazy specs and very cheap. I have yet to have any word on them at all, good or bad. I really would like to not jump into a purchase but the specs are insane. Metal geared, .15 at 180 oz torque for 20 bucks. Also one is at .9 at 111 oz. Please let me know!

D113F Digital 9 .32 0.13 1.6 22.2 22.6x11.4x22.2 .89x.45x.87 4.8 M20S Nylone Bearing
D213F Digital 9 0.32 0.13 1.6 22.2 22.6x11.4x22.2 .89x.45x.87 4.8 M20S Metal Bearing
D125F Digital 43 1.5 0.22 5 69.4 39.3x19.4x38.7 1.54x.76x1.52 6 020 Nylone Bearing
D126F Digital 43 1.5 0.17 4 55.5 39.3x19.4x38.7 1.54x.76x1.52 6 020 Nylone Bearing
D121F Digital 37 1.3 0.22 8 111.1 39.3x19.4x38.7 1.54x.76x1.52 6 030 Nylone Bearing
D122F Digital 37 1.3 0.17 6 83.3 39.3x19.4x38.7 1.54x.76x1.52 6 030 Nylone Bearing
D123F Digital 50 1.76 0.2 8.5 118 39.3x19.4x38.7 1.54x.76x1.52 6 030 Metal Bearing
D124F Digital 50 1.76 0.17 6.5 90.3 39.3x19.4x38.7 1.54x.76x1.52 6 030 Metal Bearing
D226F Digital 60 2.1 0.15 13 180.5 39.3x19.4x38.7 1.54x.76x1.52 6 Coreless Metal Bearing
D227F Digital 60 2.1 0.09 8 111.1 39.3x19.4x38.7 1.54x.76x1.52 6 Coreless Metal Bearing
B1221 Standard 43 1.5 0.23 4.5 62.5 39.3x19.4x38.7 1.54x.76x1.52 6 020 Nylone Bearing
B1222 Standard 43 1.5 0.18 3 41.7 39.3x19.4x38.7 1.54x.76x1.52 6 020 Nylone Bearing
B1226 Standard 120 4.2 1.3/360 11 152.8 58x28x52 2.29x1.10x2.05 6 370 Nylone Bearing
B1227 Standard 115 4.0 0.16 11 152.8 58x28x52 2.29x1.10x2.05 6 370 Nylone Bearing
B1228 Standard 125 4.4 0.16 15 208.3 58x28x52 2.29x1.10x2.05 6 370 Metal Bearing
eugeneflorida is offline        Reply With Quote
Old 09-04-2009, 07:08 AM   #7
Altec
Registered Users
 
Posts: 1,007
 
My HF Map location
Join Date: Feb 2009
Location: South Jersey
Default

Quote:
Originally Posted by M.Huerta View Post
IMO servos are NOT something that you wanna go cheap with on a heli, they are the most important component and you do not want to risk them. Just my .02
+1
Altec is offline        Reply With Quote
Old 09-04-2009, 05:52 PM   #8
JimDeadly
Registered Users
 
Posts: 159
 

Join Date: Jul 2009
Location: South Georgia
Default

Hobbypartz.com for the exi's, $4.95 flat rate ship. The d213 is $9 each, my bad on price was looking at another site where they are more.

Readyheli.com for a set of 3 hs 5065 digital MG, $105, free ship.

Still, though I have no complaints about my d213's, I like my hitecs more. They seem to feel better.

On a side note... I do have an exi 450 decked out with the cheapest possible hobbyking parts available. Never had a problem with it in over 100 flights (all scale type, it's all I will let myself do, still learning) and the lightness of everything gives me the longest flight times of anything I have.

Depends on what you are doing I guess.
JimDeadly is offline        Reply With Quote
Old 09-05-2009, 02:36 PM   #9
wws2010
Registered Users
 
Posts: 323
Thread Starter Thread Starter
 

Join Date: Mar 2008
Location: Los Angles
Default

I just dont want to spend that much money and plan on buying new stuff anyway in the near future. With those specs though, if the centering is a little off I can live with it. I dont think catastrophic failure is common, considering no complaints have been made, as compared to align servos.
wws2010 is offline        Reply With Quote
Old 09-05-2009, 03:02 PM   #10
fflier9
Registered Users
 
Posts: 1,216
 

Join Date: Oct 2008
Location: Wauwatosa, WI
Default

well you you can pretty much guarantee that the specs they give are inflated...so I wouldn't go based on how they look on paper...
fflier9 is offline        Reply With Quote
Old 09-05-2009, 03:03 PM   #11
keith shaw
Registered Users
 
Posts: 640
 

Join Date: Feb 2005
Location: atl
Default

How many manufacturers of servos do you think are out there? I would say not that many...The market is not big enough to support many, many manufacturers... it simply is not cost effective.
Servos sold under many other names could very well be the same servo you pay premium $ for under a well known label ie JR, or Futaba. If you don't have direct evidence to counter this, you need to so some research. I've paid $13 for servos that sell for more than $100 ea. and got the same performance. Marketing has many faces and will take all you're willing to pay!
keith shaw is offline        Reply With Quote
Old 09-05-2009, 10:36 PM   #12
wws2010
Registered Users
 
Posts: 323
Thread Starter Thread Starter
 

Join Date: Mar 2008
Location: Los Angles
Default

thats what I was thinking
wws2010 is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopters > Main Forum - Helicopter Talk


Main Forum - Helicopter Talk R/C Helicopters and the people who fly them. VENDOR TOPICS DO NOT GO HERE. Full Scale Heli threads go in OT please

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com