Head blades and tail blades

Jorge700 · 01-14-2010, 08:20 PM

Hi like i said that i would like tips for the set up of my helis and i would like to know some really good blades for my t-rex 600 and 700 so that they can fly better.Thanks and I appreciate it.

Big Fil · 01-21-2010, 03:40 PM

Lots of good blades on the market in those sizes. What blades one likes really comes down to a personal choice. They all have their own feel and characteristics. Some are faster and poppy, some are more stable and controlled. I would encourage you to try different ones as the need comes up to buy new ones. Even better is if you have a group of friends you fly with have a blade swap day.

My personal preference are the EDGE blades.

RAV50 · 01-21-2010, 06:18 PM

I have flown some pretty bad C/F blades as well as some great ones. Fortunately most blades from reputed blade manufacturers will perform very well, some just better then others in specific areas.

For me I have come to really like the Rotor Tech 3D (66 series) for all out flying, Great 3D with no pitchiness in FFF or FBF flight..and alos auto very well. So for your 600 I would get the 610mm ones and for your 700, either the 690's or the 710's.

Jorge700 · 01-22-2010, 04:34 PM

Thank you both for your opinions,they were really helpful.

01-14-2010, 08:20 PM	#1
Jorge700 Registered Users Join Date: Dec 2009 Location: Cleveland,Ohio	Head blades and tail blades Hi like i said that i would like tips for the set up of my helis and i would like to know some really good blades for my t-rex 600 and 700 so that they can fly better.Thanks and I appreciate it.

01-21-2010, 03:40 PM	#2
Big Fil Registered Users My HF Map location Join Date: Mar 2007 Location: Santa Rosa, CA	Lots of good blades on the market in those sizes. What blades one likes really comes down to a personal choice. They all have their own feel and characteristics. Some are faster and poppy, some are more stable and controlled. I would encourage you to try different ones as the need comes up to buy new ones. Even better is if you have a group of friends you fly with have a blade swap day. My personal preference are the EDGE blades. __________________ Mikado Model Helicopters Edge Blades

01-22-2010, 04:34 PM	#4
Jorge700 Registered Users Thread Starter Join Date: Dec 2009 Location: Cleveland,Ohio	Thanks Thank you both for your opinions,they were really helpful.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-21-2010, 06:18 PM	#3
RAV50 Registered Users Join Date: Mar 2005 Location: GWN	I have flown some pretty bad C/F blades as well as some great ones. Fortunately most blades from reputed blade manufacturers will perform very well, some just better then others in specific areas. For me I have come to really like the Rotor Tech 3D (66 series) for all out flying, Great 3D with no pitchiness in FFF or FBF flight..and alos auto very well. So for your 600 I would get the 610mm ones and for your 700, either the 690's or the 710's.