![]() |
|
| Register | FAQ | PM | News | Events | Groups | Blogs | Calendar | Mark Forums Read |
![]() |
|
Unregistered
|
||||||
| Main Forum - Helicopter Talk R/C Helicopters and the people who fly them. VENDOR TOPICS DO NOT GO HERE. Full Scale Heli threads go in OT please |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Registered Users
|
Hi guys - specifically OPTIFUEL users...
I have received a 5 litre jug of OptiFuel, but the white tear-off strip below the cap is missing. Also, the jug appears to have more fuel in it than the ' 5 litre FULL' sticker indicates - by about 15mm. Should I be worried about this and return it from whence it came? Worried it could be contaminated - who's to say it's not had water poured in it. Is there a test for this? What would it do if I used it in my heli and it had a small proportion of water in it? Cheers
__________________
leeph T-Rex 600 NSP: OS 50 Hyper, Align DS610 on cyclic, DS760 w/s9254 on tail, s3152 on throttle, RCE-G600 T-Rex 500 CF: Stock align motor and esc w/12T, Hitec 82mg on cyclic, DS760 w/9257 on tail |
|
|
|
|
|
#2 |
|
Registered Users
|
I got a brand new bottle handed to me on saturday by Andy Lever that was like that. I dont think the lid is a problem but never noticed the fuel level. The previous bottle i had did have the tear off strip on it as well.
__________________
Perfectregulators.com |
|
|
|
|
|
#3 |
|
Registered Users
|
I have 2 unopened containers, both have the tear off sealing strip, and both of them are above the mark on the label that says "full" 5L
|
|
|
|
![]() |
|
Unregistered
|
||||||
| Main Forum - Helicopter Talk R/C Helicopters and the people who fly them. VENDOR TOPICS DO NOT GO HERE. Full Scale Heli threads go in OT please |
| Thread Tools | |
| Display Modes | |
|
|