On/Off for CP2

divepilot · 07-01-2010, 02:48 PM

I'm using a Futaba 7C and would like to know what switch to use for on/off and how to I enable this switch. The installation went pretty easy but I'm stuck at this point. I have not set up the CP2 just yet. Should I do this first?

nightflyr · 07-01-2010, 03:45 PM

You can assign the open channel to the on/off function and I believe you can assign a switch to that specific channel. I know it can be done on a Futaba 10CHP

07-01-2010, 02:48 PM	#1
divepilot Registered Users Join Date: May 2008	On/Off for CP2 I'm using a Futaba 7C and would like to know what switch to use for on/off and how to I enable this switch. The installation went pretty easy but I'm stuck at this point. I have not set up the CP2 just yet. Should I do this first?

07-01-2010, 03:45 PM	#2
nightflyr Registered Users My HF Map location Join Date: Jan 2009 Location: Long Island, NY	You can assign the open channel to the on/off function and I believe you can assign a switch to that specific channel. I know it can be done on a Futaba 10CHP __________________ MSR, MCPX, 450s, 600, 650, 700, 800, 900, 1000 Assorted Mix Fixed Wing. AMA # 972083

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode