Pitch gauge mod (I know Im prolly not the first...)

Ken448 · 12-15-2006, 11:24 AM

Never one to leave anything alone, I decided to modify mt pitch gauge to make it a tad easier to read. Rather than having a blunt plastic nub to read the setting, I epoxied a needle on to the nub so it reads much easier. I know entirley not necessary, but I like to mess with stuff! Now, I just dial the needle to the desired setting and adjust away!

BruceW · 12-15-2006, 11:42 AM

That's a nice mod.

I was just using mine last night to adjust my pitch range to +/-12 (after the recent discussions about giving it more pop) and the needle was hard to see. I turned on more lights but it was still hard to see. I kept meaning to put a white stripe on it but your mod might be even better.

Thanks for sharing,

BruceW

aevans692 · 12-20-2006, 02:17 PM

Would be good to have a bub lev on it too...

12-15-2006, 11:42 AM	#2
BruceW Registered Users My HF Map location Join Date: Jun 2006 Location: Santa Barbara	That's a nice mod. I was just using mine last night to adjust my pitch range to +/-12 (after the recent discussions about giving it more pop) and the needle was hard to see. I turned on more lights but it was still hard to see. I kept meaning to put a white stripe on it but your mod might be even better. Thanks for sharing, BruceW __________________ Logo 500 3D /Scorpion HK4020-1100KV (16T)/Jazz80/BLS451/Spartan DS760/BLS251/RT 560mm/AR9000 TRex 450SE /Scorpion HK-2221-8 (13T)/ AlignESC35(X)/ HS65MG/Spartan DS760/S9650/AR6100 Spektrum DX7

12-20-2006, 02:17 PM	#3
aevans692 Registered Users My HF Map location Join Date: Oct 2006 Location: Kent England	Would be good to have a bub lev on it too... __________________ Trex 450se Raptor Titan 50 Trex 600nitro PRO Dx7 Trex 700 nitro PRO

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode