Updated: 2 New Trex 600 downloads for G3.5 by yogi149 - Page 2

dct · 01-09-2007, 10:37 AM

I went to the (( other,, web site)) and re-down loaded those files again and it worked this time. I don't know why it worked then flying this time and not last time? Maybe he changed them?
But I'm happy now. :mrgreen:

supertrex2 · 01-09-2007, 06:42 PM

hey guys im getting this message everytime download it and save it under.

Planes
Custom

I tried saving it on G3X and tried importing it and i dont see any trex600.

help anyone?

DebianDog · 01-09-2007, 08:11 PM

I have Add on 2 maybe that is it?

kama1 · 01-09-2007, 10:10 PM

need to make sure you import the EA.
you would get that message if you imported a varient and dont have the model its based off of.

yogi149 · 01-10-2007, 01:15 AM

Hi

Quote:

Originally Posted by supertrex2

hey guys im getting this message everytime download it and save it under.

Planes
Custom

I tried saving it on G3X and tried importing it and i dont see any trex600.

help anyone?

could it be that you try to load / import in version 3.0 and not 3.5?

All my helis are custom made and need no expansion packs (I haven't one)
But you have to import because I made some engine and accu-cell definitions.

For those who have not seen yet, at Kbife Edge swap pages are also 2 450 size T-rex from me

DebianDog · 01-10-2007, 03:26 AM

Quote:

Originally Posted by yogi149

For those who have not seen yet, at Kbife Edge swap pages are also 2 450 size T-rex from me

I looked around but could not find them

Could you just start a new thread and upload them here?

kama1 · 01-10-2007, 08:02 AM

post edited up top.
tail is much better
over all flight is nice
still lil bit of main blade wobble though

kama1 · 01-13-2007, 09:13 AM

big thanks to yogi149 for the T600

uploaded a new file and man its sweet
flys great
can get the new file from the first post.
definitely worth importing again

yogi your the man
thank you for bringing heli love to G3

supertrex2 · 01-14-2007, 10:17 PM

Hey guys, I finally got a chance to download the Trex600. But... I got some problems...

First: The heli dont hover slow upward... it jumps!
Second: The blade is wobbling.

???

Third: its kinda like a Trex 450 feeling...
Does all this sounds normal or I mess it up again....???

btw I downloaded the updated version.

and.... trying to go slow inverted... and heli will get twitchy....

kama1 · 01-15-2007, 08:36 AM

the blade wobbleing was due to
some missalinement with the pivot points in the 3D model itself.
if your still getting a blade wobble you most likely dont have the 3rd revision of the model.
if you got yours from the very top post i might of uploaded the wrong one.
you can how ever go to the link in the very top post.
that takes you to the G3 swap pages and you can download from there.
that will asure you are getting the correct final version.
ill recheck my uploads in the mean time. :mrgreen:

kama1 · 01-15-2007, 08:48 AM

almost forgot.
the t600 floater has also been had the 3D model revamped.
no more blade wobble on that one now either.
edited the first post with the new version

hats off to yogi149 for going the extra mile in finalizing these 2 models.
thanks for stickin with it yogi you rock man

:Band

Finless · 01-29-2007, 12:54 PM

Hey the latest update to G3 has hosed up all the Trex600 models here!

The rotor does this WIERD wobble and the heli doesnt fly like a real one anymore (too easy to fly now).

Bob

kama1 · 01-29-2007, 02:06 PM

hmm
have to ask it
you have the most resent versions of the helis?
the files in the first post are of the 3rd version .
work fine for me with the latest version of the G3.5
no wobbles

Finless · 01-29-2007, 02:08 PM

Are they the downloads in the first post or do we go to the knife edge link?

Bob

kama1 · 01-29-2007, 09:05 PM

the downloads in the first post

Cryofix · 02-02-2007, 06:36 PM

I am having a problem with the governor I cant keep my head speed stead drops all the way down to like 1300 can do 1 or more tic tocs, any way to fix this?

DebianDog · 02-02-2007, 06:47 PM

Idle up 1?

Hawkdaddy · 02-10-2007, 02:27 PM

If having problems with things not working right, or no color scheme, try reinstalling it...OVERWRITE the original file, it worked for me!

Jeff

Skiddz · 03-16-2007, 09:13 PM

OK, that newest version is MUCH better than the last one... Thx for all the hard work yogi!

Striker · 03-19-2007, 02:39 AM

Does the T600 really fly like this model? Id so I'll be buying one tomorrow!!!

-Eric

01-09-2007, 10:37 AM	#21
dct Registered Users Join Date: May 2006 Location: San Angelo TX.	I went to the (( other,, web site)) and re-down loaded those files again and it worked this time. I don't know why it worked then flying this time and not last time? Maybe he changed them? But I'm happy now. :mrgreen: __________________ Now doing EASY 3D!! And having a Ball !!Trex 550e FBL V2 AR7200BX with CC BEC PRO ,And Trex 450 SA / SE metal head and carbon boom with V2 canopy, 430L motor, Hitec 65mg servo's, Futaba 401 gyro ! T-rex 450 Pro, DFC with AR7200BX To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-09-2007, 08:11 PM	#23
DebianDog Registered Users My HF Map location Join Date: Mar 2005 Location: Powhatan, VA	I have Add on 2 maybe that is it? __________________ Dan Da Dawg - JR X9303 Hexa F550 on 3S + 6S TREX 500 + 6S TREX 600 + Blade mSR + Blade mCPx2 Brushless + 12S Rave FBL ENV

01-09-2007, 10:10 PM	#24
kama1 Registered Users Thread Starter My HF Map location Join Date: Jun 2006 Location: Cresco PA	need to make sure you import the EA. you would get that message if you imported a varient and dont have the model its based off of. __________________ * Why dont you go shave your big stink head with your bad self * * It sure does have some power ... but the tail sucks * * Every time I crash a kitten dies......so many lost kittens * Dropping the F bomb as much as possible To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-10-2007, 08:02 AM	#27
kama1 Registered Users Thread Starter My HF Map location Join Date: Jun 2006 Location: Cresco PA	post edited up top. tail is much better over all flight is nice still lil bit of main blade wobble though __________________ * Why dont you go shave your big stink head with your bad self * * It sure does have some power ... but the tail sucks * * Every time I crash a kitten dies......so many lost kittens * Dropping the F bomb as much as possible To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-13-2007, 09:13 AM	#28
kama1 Registered Users Thread Starter My HF Map location Join Date: Jun 2006 Location: Cresco PA	big thanks to yogi149 for the T600 uploaded a new file and man its sweet flys great can get the new file from the first post. definitely worth importing again yogi your the man thank you for bringing heli love to G3 __________________ * Why dont you go shave your big stink head with your bad self * * It sure does have some power ... but the tail sucks * * Every time I crash a kitten dies......so many lost kittens * Dropping the F bomb as much as possible To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-14-2007, 10:17 PM	#29
supertrex2 Registered Users Join Date: May 2006 Location: Florida	Hey guys, I finally got a chance to download the Trex600. But... I got some problems... First: The heli dont hover slow upward... it jumps! Second: The blade is wobbling. ??? Third: its kinda like a Trex 450 feeling... Does all this sounds normal or I mess it up again....??? btw I downloaded the updated version. and.... trying to go slow inverted... and heli will get twitchy.... __________________ oh ohh its going down...S$%#T...relax.. relax.... concentrate......try to control.. oooops too late... already crashed!

01-15-2007, 08:36 AM	#30
kama1 Registered Users Thread Starter My HF Map location Join Date: Jun 2006 Location: Cresco PA	the blade wobbleing was due to some missalinement with the pivot points in the 3D model itself. if your still getting a blade wobble you most likely dont have the 3rd revision of the model. if you got yours from the very top post i might of uploaded the wrong one. you can how ever go to the link in the very top post. that takes you to the G3 swap pages and you can download from there. that will asure you are getting the correct final version. ill recheck my uploads in the mean time. :mrgreen: __________________ * Why dont you go shave your big stink head with your bad self * * It sure does have some power ... but the tail sucks * * Every time I crash a kitten dies......so many lost kittens * Dropping the F bomb as much as possible To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-15-2007, 08:48 AM	#31
kama1 Registered Users Thread Starter My HF Map location Join Date: Jun 2006 Location: Cresco PA	almost forgot. the t600 floater has also been had the 3D model revamped. no more blade wobble on that one now either. edited the first post with the new version hats off to yogi149 for going the extra mile in finalizing these 2 models. thanks for stickin with it yogi you rock man :Band __________________ * Why dont you go shave your big stink head with your bad self * * It sure does have some power ... but the tail sucks * * Every time I crash a kitten dies......so many lost kittens * Dropping the F bomb as much as possible To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-29-2007, 12:54 PM	#32
Finless Team Taco VP My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	Hey the latest update to G3 has hosed up all the Trex600 models here! The rotor does this WIERD wobble and the heli doesnt fly like a real one anymore (too easy to fly now). Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

01-29-2007, 02:06 PM	#33
kama1 Registered Users Thread Starter My HF Map location Join Date: Jun 2006 Location: Cresco PA	hmm have to ask it you have the most resent versions of the helis? the files in the first post are of the 3rd version . work fine for me with the latest version of the G3.5 no wobbles __________________ * Why dont you go shave your big stink head with your bad self * * It sure does have some power ... but the tail sucks * * Every time I crash a kitten dies......so many lost kittens * Dropping the F bomb as much as possible To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-29-2007, 02:08 PM	#34
Finless Team Taco VP My HF Map location Join Date: Nov 2005 Location: Stanton, Ca. USA	Are they the downloads in the first post or do we go to the knife edge link? Bob __________________ "Don't Taco My Pack Dude!" To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

01-29-2007, 09:05 PM	#35
kama1 Registered Users Thread Starter My HF Map location Join Date: Jun 2006 Location: Cresco PA	the downloads in the first post __________________ * Why dont you go shave your big stink head with your bad self * * It sure does have some power ... but the tail sucks * * Every time I crash a kitten dies......so many lost kittens * Dropping the F bomb as much as possible To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

02-02-2007, 06:36 PM	#36
Cryofix HeliFreak Security Staff My HF Map location Join Date: Jun 2006 Location: Easton PA	I am having a problem with the governor I cant keep my head speed stead drops all the way down to like 1300 can do 1 or more tic tocs, any way to fix this? __________________ MSH Protos FBL SK720 Trex 600 14S A123 CCHV110 Actro 24-3 Trex 600 AP 12S A123 CCHV85 NEU 1912 1y Gaui 200 Trex 450 SE V2 Dedicated night Rig

02-02-2007, 06:47 PM	#37
DebianDog Registered Users My HF Map location Join Date: Mar 2005 Location: Powhatan, VA	Idle up 1? __________________ Dan Da Dawg - JR X9303 Hexa F550 on 3S + 6S TREX 500 + 6S TREX 600 + Blade mSR + Blade mCPx2 Brushless + 12S Rave FBL ENV

02-10-2007, 02:27 PM	#38
Hawkdaddy Registered Users My HF Map location Join Date: Feb 2007 Location: Waynesville, Ohio	If having problems with things not working right, or no color scheme, try reinstalling it...OVERWRITE the original file, it worked for me! Jeff __________________ Jeff Remember, they land better with the wheels or skids down! T-Rex 450 SE, 5065MGs, GY401/9650, DX7 T-Rex 600 N Sport, 6965s, DS760/9254, metal upgrades, OS 50 Hyper, Radix Mains AMA# 880970, IRCHA# 3328

03-16-2007, 09:13 PM	#39
Skiddz HF Support My HF Map location Join Date: May 2006 Location: Carlsbad, CA (USA)	OK, that newest version is MUCH better than the last one... Thx for all the hard work yogi! __________________ -Kevin No helicopters were harmed in the creation of this post. AMA CD # 7309, Turbine Waiver# RW 890 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

03-19-2007, 02:39 AM	#40
Striker Registered Users Join Date: Dec 2006 Location: Boulder, Colorado	Does the T600 really fly like this model? Id so I'll be buying one tomorrow!!! -Eric __________________ Trex 600 HFE / Trex 450se / Blade CP Pro To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode