Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Avant RC - Mostro & Aurora


Avant RC - Mostro & Aurora Avant Mostro, Aurora, Electric eAurora, RigidCore Flybarless Head, Avant EFX and Avant FX Helicopter Support


Reply
 
Thread Tools Display Modes
Old 02-10-2011, 12:03 PM   #1
Rexdestroyer
Registered Users
 
Posts: 277
 

Join Date: Apr 2008
Location: Maple Grove, Minnesota
Default Castle ICE settings for Aurora?

I've finished the build on my new E Aurora. All that I have left is to complete the settings for the Castle ICE 120 esc.

Would anyone be so kind as to share their esc settings here?

I'm also running the Scorpion 4035 500kv motor.

Thanks!
__________________
AVANT MOSTRO - AVANT eAurora - Logo 600 - Gaui X5
Rexdestroyer is offline        Reply With Quote
Old 02-10-2011, 03:22 PM   #2
united737pilot
Registered Users
 
Posts: 308
 

Join Date: Feb 2007
Location: Chandler, Arizona
Default

Jason Bell just gave me these settings over on the Avant Forum: Scorpion 4035-500

With the newest V3.26, you should be able to spin 2000rpm without the "too fast for proper governing"

What pole count are you using in the set up menu for the governor? It should be 10, along with 10T pinion, 99T main, 500kv, and 12s setting.

I have always ran 8Khz on the motor, which can be found here.

I have been running a governor gain of around 14, and found that to work well.
__________________
united737pilot
united737pilot is offline        Reply With Quote
Old 02-11-2011, 12:01 PM   #3
Rexdestroyer
Registered Users
 
Posts: 277
Thread Starter Thread Starter
 

Join Date: Apr 2008
Location: Maple Grove, Minnesota
Default

Thank you! I'll give this a try.
__________________
AVANT MOSTRO - AVANT eAurora - Logo 600 - Gaui X5
Rexdestroyer is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Avant RC - Mostro & Aurora


Avant RC - Mostro & Aurora Avant Mostro, Aurora, Electric eAurora, RigidCore Flybarless Head, Avant EFX and Avant FX Helicopter Support

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2015 by RCGroups.com, LLC except where otherwise indicated. The HeliFreak.com logo is a trademark of RCGroups.com, LLC.