JR9503 and GY701 users ?

whoanelly · 02-25-2011, 05:59 AM

Hey guys,going nuts here. cannot get my 701 to read more than one flight mode during set up.
everything works but this.
im running switchglow off my gear channel ,it works
gyro is running off rudder on TX . it works.
just cant get the setup right when i change from norm to stunt 1 and stunt 2 i can see throttle servo move but nothing in the setup menu on gov.
worked fine when i was running it with my DX7 but just lost now .

equipment : GY701 + GOV , JR9503 , AR7100R . any one else have this setup working ?

thanks , Ive searched everywhere .

Al Miessner · 02-25-2011, 09:58 AM

I'm not a JR guy, but I think I've heard you had to turn on the Gear mode or Aux..
I'm running the 701 with 8FG with no issues. maybe bounce your settings page by page from the DX7 to you 9503

whoanelly · 02-25-2011, 10:37 AM

Ya thats what ive been trying to do aswell , the DX7 doesnt quite read the same so its hard to get it figured out,,plus there was a great write up on the DX7 and switchglow i followed .. i appreciate it but this has me stumped..i have everything set, it just wont pick up more than 1 idle mode ..

whoanelly · 02-25-2011, 11:45 AM

Heres how my devicesel looks.

F:MOD THRO PIT GEAR AUX 2 AUX3 AUX4
EXTRA HOLD TRIM GEAR AUX 2 AUX3 AUX4
INH HOLD INH ACT ACT INH INH

hope that helps at all,,lol..sorry ,,this site isnt letting me space em better ,,it groups it.

backburner1955 · 02-25-2011, 02:27 PM

Did you try watching the Finless videos on the X9503? I had to when I switched over.

whoanelly · 02-25-2011, 05:04 PM

Hey Bryan,,i looked for a video on the 9503, i found 9303 but it was one talking about dual rates and expo,,ill look again . is it in his tech room ?

whoanelly · 02-25-2011, 05:24 PM

HOLY COW,,I GOT IT,,even the sun shines on a dogs ass once in awhile.... Thanks Bryan ,i found the video and it worked perfect..i owe you a 1 cell battery,,LOL...

backburner1955 · 02-25-2011, 06:09 PM

whoanelly · 02-25-2011, 09:24 PM

Quote:

Originally Posted by backburner1955

OMG,,where the heck u find those smilees,,those are great..

backburner1955 · 02-25-2011, 09:58 PM

If you click on them, it will take you to the webpage, just right click on which ever you want, select the BB code and paste into the forum.

whoanelly · 02-26-2011, 10:17 AM

Nice..

dch · 03-07-2012, 08:41 AM

I am using the same setup (X9503, AR7100R and GY701) for my TT Titan X50TT build. Any issues not using the rev limiter on the AR7100R and using the gov on the GY701? Communications issues between the two? Just wondering?

Roger Palacio · 03-09-2012, 12:58 AM

Quote:

Originally Posted by whoanelly

HOLY COW,,I GOT IT,,even the sun shines on a dogs ass once in awhile.... Thanks Bryan ,i found the video and it worked perfect..i owe you a 1 cell battery,,LOL...

can you post a link please ?

Roger P

Azalin · 05-07-2012, 09:33 AM

err. Are you serious? Because i have heard that non Futaba users need to use the S-Bus signal converter to be able to use 701's and 750's.

BladeFartz · 05-07-2012, 10:49 PM

Nope, only needed on the CGY750

02-25-2011, 05:59 AM	#1
whoanelly Registered Users Join Date: Apr 2008 Location: Central Ca	JR9503 and GY701 users ? Hey guys,going nuts here. cannot get my 701 to read more than one flight mode during set up. everything works but this. im running switchglow off my gear channel ,it works gyro is running off rudder on TX . it works. just cant get the setup right when i change from norm to stunt 1 and stunt 2 i can see throttle servo move but nothing in the setup menu on gov. worked fine when i was running it with my DX7 but just lost now . equipment : GY701 + GOV , JR9503 , AR7100R . any one else have this setup working ? thanks , Ive searched everywhere . __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

02-25-2011, 09:58 AM	#2
Al Miessner Registered Users My HF Map location Join Date: Oct 2007 Location: Virginia Beach, Virginia	I'm not a JR guy, but I think I've heard you had to turn on the Gear mode or Aux.. I'm running the 701 with 8FG with no issues. maybe bounce your settings page by page from the DX7 to you 9503 __________________ Flying Hard makes it fun (AnimAL) *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* GrandRC Team Pilot

02-25-2011, 10:37 AM	#3
whoanelly Registered Users Thread Starter Join Date: Apr 2008 Location: Central Ca	Ya thats what ive been trying to do aswell , the DX7 doesnt quite read the same so its hard to get it figured out,,plus there was a great write up on the DX7 and switchglow i followed .. i appreciate it but this has me stumped..i have everything set, it just wont pick up more than 1 idle mode .. __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

02-25-2011, 11:45 AM	#4
whoanelly Registered Users Thread Starter Join Date: Apr 2008 Location: Central Ca	Heres how my devicesel looks. F:MOD THRO PIT GEAR AUX 2 AUX3 AUX4 EXTRA HOLD TRIM GEAR AUX 2 AUX3 AUX4 INH HOLD INH ACT ACT INH INH hope that helps at all,,lol..sorry ,,this site isnt letting me space em better ,,it groups it. __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

02-25-2011, 02:27 PM	#5
backburner1955 Registered Users Join Date: Mar 2010 Location: Fresno, CA.	Did you try watching the Finless videos on the X9503? I had to when I switched over. __________________ *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* AMA# 982814 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

02-25-2011, 05:04 PM	#6
whoanelly Registered Users Thread Starter Join Date: Apr 2008 Location: Central Ca	Hey Bryan,,i looked for a video on the 9503, i found 9303 but it was one talking about dual rates and expo,,ill look again . is it in his tech room ? __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

02-25-2011, 05:24 PM	#7
whoanelly Registered Users Thread Starter Join Date: Apr 2008 Location: Central Ca	HOLY COW,,I GOT IT,,even the sun shines on a dogs ass once in awhile.... Thanks Bryan ,i found the video and it worked perfect..i owe you a 1 cell battery,,LOL... __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X.

02-25-2011, 06:09 PM	#8
backburner1955 Registered Users Join Date: Mar 2010 Location: Fresno, CA.	__________________ *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* AMA# 982814 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

02-25-2011, 09:58 PM	#10
backburner1955 Registered Users Join Date: Mar 2010 Location: Fresno, CA.	If you click on them, it will take you to the webpage, just right click on which ever you want, select the BB code and paste into the forum. __________________ *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* AMA# 982814 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.* *To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.*

02-26-2011, 10:17 AM	#11
whoanelly Registered Users Thread Starter Join Date: Apr 2008 Location: Central Ca	Nice.. __________________ 700LE : 105HZR AR7200BX JR8917 Multi gov , JR9503 600ESP : 100AMP Castle. Scorpion Motor . AMA #962896 400 Blade : Scorpion 2221-6 ,Castle ICE 50 Sonix Head and t Align 450 pro V2 3G MKS DS95 MSR , 2 x MCPX (brushless C05 & HP05), Blade 130X. Last edited by whoanelly; 02-26-2011 at 10:07 PM..

03-07-2012, 08:41 AM	#12
dch Registered Users Join Date: Feb 2007 Location: Indianapolis	I am using the same setup (X9503, AR7100R and GY701) for my TT Titan X50TT build. Any issues not using the rev limiter on the AR7100R and using the gov on the GY701? Communications issues between the two? Just wondering? __________________ Thunder Tiger Titan X50TT FBL, Align T-Rex 500 ESP FBL, Blade 450X, Blade 130X, Blade Nano CP X

05-07-2012, 09:33 AM	#14
Azalin Registered Users My HF Map location Join Date: May 2010 Location: Turkey	err. Are you serious? Because i have heard that non Futaba users need to use the S-Bus signal converter to be able to use 701's and 750's. __________________ Trex 700 Gasser FBL \| HeliBug HB7-RC 17T \| Silverline V-Bar\| TRM VX270TT \| SG \| RJX Gas muffler \| JR x9503 Trex 600 Gasser FBL \| HeliBug HB6-RC7 20T \| Brain \| GV-1 \| Stock Zenoah G290RC \| RJX pipe \| JR x9503

05-07-2012, 10:49 PM	#15
BladeFartz Registered Users Join Date: Nov 2011 Location: Philadelphia, PA	Nope, only needed on the CGY750

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode