Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Other Makes and Models Helicopters > RJX


RJX RJX Helicopter Support


Reply
 
Thread Tools Display Modes
Old 02-23-2007, 06:37 PM   #1
Rockohaulic
Registered Users
 

Join Date: May 2006
Location: Valencia, CA
Default Hurrican 50 Build Specs - Whacha Got on it??

What are you guys building your Hurrican's up with???

I'm planning the following:

OS50 Hyper
CY MPII Muffler
CY Radix 600mm Blades
Futaba R138 PCM RX
MultiGov Governor
Hitec HS-6965HB Servos (Cyclic & Collective)
Futaba S9253 Throttle Servo
LogicTech 6100T/6100G Gyro & Tail Servo

Wooo Hoooo - Can't wait!

PS: This Gyro is comparable to a 611, yet this combo only costs $60 more than a GY401/S9254 combo. Sweeeeeeeeet!!

This is my first venture with a governor and away from the 401... :?
Rockohaulic is offline        Reply With Quote
Old 02-23-2007, 07:09 PM   #2
chase
Registered Users
 
Posts: 94
 

Join Date: Aug 2005
Location: oklahoma city
Default

OSHyper
CY MPII
Radix 600mm
GV1 gov
Futaba 9252's
I will also be trying out the Logitech 6100t comabo

Rockohaulic Have you recieved your kit yet?
Which one did you get?
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Check it out!!!!!!!!!
chase is offline        Reply With Quote
Old 02-23-2007, 07:42 PM   #3
Rockohaulic
Registered Users
Thread Starter Thread Starter
 

Join Date: May 2006
Location: Valencia, CA
Default

No I haven't received the kit yet! UPS says I won't get it until next week. Going crazy waiting!

I got the G-10 Frame. With the money I saved by not going CF, I spent it on the full metal tail!! :dance

Have you tried the LogicTech before? My only concern is setup. I hear the instructions suck!
Rockohaulic is offline        Reply With Quote
Old 02-23-2007, 08:38 PM   #4
chase
Registered Users
 
Posts: 94
 

Join Date: Aug 2005
Location: oklahoma city
Default

NI havent tried the logitech yet. But I belive finless did some what of a instructional video on it. I am wishing I would of bout the tail but I didnt. I am going to fly the stock tail for now. Plus my wife is a little upset that I have spent so much money on one heli. Like that money is doing any good in bank!!! And what else is better to spend it on? I'm installing the servos right now. I am awaiting a piston for my hyper and hopefully I will be flying it next weekend. But it will be with a 401 untill the 6100 gets here.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Check it out!!!!!!!!!
chase is offline        Reply With Quote
Old 02-23-2007, 08:52 PM   #5
Rockohaulic
Registered Users
Thread Starter Thread Starter
 

Join Date: May 2006
Location: Valencia, CA
Default

Wife? What's that?

Oh I had one of those once! Twice actually. They tend to do that fun limiting, fund limiting thing don't they!

Single now! No problem! Life is good!
Rockohaulic is offline        Reply With Quote
Old 02-23-2007, 09:35 PM   #6
chase
Registered Users
 
Posts: 94
 

Join Date: Aug 2005
Location: oklahoma city
Default

Ahh my wife supports me in this hobby really. She has helped with my website and even talked me into buying a turbine. She actually loves my hurrican. Thanks to Rusty it is the only one of its kind in the USA that is in a NITRO version.

Just got done setting up the servos and that went pretty damn quick took about 30 minutes to do the rods and all.

Quick tip. No big deal but when installing your servos if you are going with the mpm setup. Remove the servo tray and then install the servo's. Dont install it just yet. Throw in the throttle servo first. :wink:
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Check it out!!!!!!!!!
chase is offline        Reply With Quote
Old 02-23-2007, 09:54 PM   #7
Ghostrider
Registered Users
 
Posts: 318
 

Join Date: Jul 2006
Location: San Diego, CA
Default

Full carbon kit and bling bling tail
OS Hyper
CY ATG Gov
JR 8317 All the way around
611 combo package
Duralite bat
Fromco Reg
600 V's
__________________
Sam Gammo
Ghostrider is offline        Reply With Quote
Old 02-23-2007, 11:29 PM   #8
helibrite
Registered Users
 
Posts: 334
 

Join Date: Sep 2004
Location: Springfeild IL.
Default

PICS< chase , PICS
__________________
For those of us about to "3D"........XTREME 50
For those of us about to ROCK...... Hurrican 50

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
helibrite is offline        Reply With Quote
Old 02-24-2007, 12:00 AM   #9
Ghostrider
Registered Users
 
Posts: 318
 

Join Date: Jul 2006
Location: San Diego, CA
Default

Rusty,

I will have pics for you next week. I have to go back to work until Thursday

P.S. Thanks for rushing the parts. They arrived this morning.

Sam
__________________
Sam Gammo
Ghostrider is offline        Reply With Quote
Old 02-24-2007, 12:09 AM   #10
helibrite
Registered Users
 
Posts: 334
 

Join Date: Sep 2004
Location: Springfeild IL.
Default pics

no problem Sam,
Glad your enjoying it, yeah, I would love to see your pictures posted.
Thanks Rusty :mrgreen:
__________________
For those of us about to "3D"........XTREME 50
For those of us about to ROCK...... Hurrican 50

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
helibrite is offline        Reply With Quote
Old 02-24-2007, 01:21 AM   #11
chase
Registered Users
 
Posts: 94
 

Join Date: Aug 2005
Location: oklahoma city
Default

ok here some pics
Again sorry about the quality of them.
She should be ready to go next weekend If the wind dies down by then.
Attached Images
File Type: jpg picture_011_645.jpg (669.5 KB, 44 views)
File Type: jpg picture_010_821.jpg (749.6 KB, 34 views)
File Type: jpg picture_012_940.jpg (712.1 KB, 33 views)
File Type: jpg picture_024_529.jpg (201.3 KB, 41 views)
File Type: jpg picture_015_186.jpg (767.1 KB, 42 views)
File Type: jpg picture_026_182.jpg (196.9 KB, 45 views)
File Type: jpg picture_023_182.jpg (397.9 KB, 42 views)
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Check it out!!!!!!!!!
chase is offline        Reply With Quote
Old 02-24-2007, 07:41 AM   #12
Foxden
Registered Users
 
Posts: 3,023
 
My HF Map location
Join Date: Jul 2004
Location: Port Charlotte, FL
Default

This is Steven's Demo Heli

Carbon Kit
Full metal head
Metal tail case
Carbon Boom
Carbon Fins
OS50 Hyper
Hatori JK pipe
CCPM setup
9252's on CCPM
9254 on throttle
TJ Pro with Hotwings opticle sensor
611 gyro
Radix 600 main blades
RjX 92mm tail blades
Xcel 3D white 3mm paddles
Flight Power 1800 rx pack
Arizona Regulator
Central Hobbies 3/16 carbon tail push rod
Wildcat 30% CY blend
Quick UK boom/fin clamp
Quick UK canopy supports
__________________
Clyde Fox
Port Charlotte, FL.
Team Rotorworkz/Outrage
Foxden is offline        Reply With Quote
Old 02-24-2007, 11:05 AM   #13
naz
Registered Users
 

Join Date: Apr 2006
Location: Medford, OR
Default

Chase, the silver CF looks good! You'll be very happy with flight behavior! I have THREE guys coming over (seriously, from over 60 miles away) today to look the heli over. Bling factor will be maximized if I get my canopy today, cross your fingers!
naz
naz is offline        Reply With Quote
Old 02-24-2007, 02:15 PM   #14
chase
Registered Users
 
Posts: 94
 

Join Date: Aug 2005
Location: oklahoma city
Default

Yea I am gonna have to get the tail. Just to get the bling factor up there a bit more. That way when the ground pops up it will hurt even more
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Check it out!!!!!!!!!
chase is offline        Reply With Quote
Old 02-24-2007, 02:36 PM   #15
Rockohaulic
Registered Users
Thread Starter Thread Starter
 

Join Date: May 2006
Location: Valencia, CA
Default

I Hate it when the ground comes up and hits me!
Rockohaulic is offline        Reply With Quote
Old 02-24-2007, 03:19 PM   #16
helibrite
Registered Users
 
Posts: 334
 

Join Date: Sep 2004
Location: Springfeild IL.
Default metal tail casing

Hey, guys
You'll be glad to know the metal tail will take a beating and keep on ticking.
I have had the ground come up and smack my heli three different times :motz and every time had no tail damage. Not to say it won't happen but they are strong.
Rusty
__________________
For those of us about to "3D"........XTREME 50
For those of us about to ROCK...... Hurrican 50

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
helibrite is offline        Reply With Quote
Old 02-24-2007, 03:31 PM   #17
Rockohaulic
Registered Users
Thread Starter Thread Starter
 

Join Date: May 2006
Location: Valencia, CA
Default

Three times?

Are you conducting destructive testing on that thing???

Just give it to me, I'll test it!
Rockohaulic is offline        Reply With Quote
Old 02-24-2007, 04:59 PM   #18
helibrite
Registered Users
 
Posts: 334
 

Join Date: Sep 2004
Location: Springfeild IL.
Default Durability

Yes,
"We mean business when it comes to testing"
Not really, Just my crappy piloting , which translates to good testing of the Hurrican's strenths.
__________________
For those of us about to "3D"........XTREME 50
For those of us about to ROCK...... Hurrican 50

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
helibrite is offline        Reply With Quote
Old 03-17-2007, 08:09 AM   #19
tiranosaurus rex
Registered Users
 

Join Date: Aug 2006
Location: mudgee
Default

hey guys,

os 50 hyper
9252's all round
gy611 combo
rs77s rx
hatori 522
radix 600's
radix 95 tails
custom paint job
silver aluminium head
standard plastic tail
align 3a BEC + 5.1v step down reg
2 cell 7.2v li-ion bettery
__________________
cheers,
Caleb

MA Fury Extreme:
OS.90 C-spec | MP2 | GV-1 | 9252's | GY611/9256 | RS770s | 4.8v 3600mah subC | V 690's / V 105 tails / V paddles

ALIGN T-REX 600 N (Up next)
OS.50SX-h Hyper | hatori 522 | 9252's | GY611/9256 | RS770s | 4.8v 3600mah subC | Radix 600's | NHP 95mm tails

JR X2610 trany
Reflex XTR sim

TakeoffandLand
Coolpower

'Don't be dumb...use the sim'
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
tiranosaurus rex is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Other Makes and Models Helicopters > RJX


RJX RJX Helicopter Support

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com