Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Kasama Helicopters and Upgrades


Kasama Helicopters and Upgrades Kasama Srimok 90 Helicopters and Upgrades Discussion


Reply
 
Thread Tools Display Modes
Old 05-07-2011, 12:05 AM   #1
Hendo67
Registered Users
 
Posts: 226
 

Join Date: Jun 2008
Location: Minneapolis, MN
Default Tail boom support cracked

I finally have had the time and weather to maiden my 90N. From the get go I was getting a kick in the tail during hover. It was about 2-3" and stronger towards the clockwise rotation. After playing with gyro gains, and showing little to no improvement, I shut it down. During clean up I noticed that my boom support block was cracked in half across the top (through the screw hole, screw MIA). This was a used airframe (fender bean's old one), but I did a complete tear down/ rebuild. The support was not damaged prior to flying. Only 1 1/2 tanks through it and I really don't have a vibe problem. Anyone seen this with theirs?
__________________
Synergy N5c : Synergy E7 : T700
Hendo67 is offline        Reply With Quote
Old 05-07-2011, 02:46 PM   #2
thefrog
Registered Users
 
Posts: 2,326
 

Join Date: Feb 2011
Location: Australia
Default

Yes, I have an 09 airframe (never flown) and I got it from the previous owner with the same part cracked in the same place. I ordered a replacement but didn't take the time to see if the design has changed (which I think it has).

I think you have to be careful of tightening it down too much. Not sure what others have found?
thefrog is offline        Reply With Quote
Old 05-07-2011, 05:32 PM   #3
tribe3
Registered Users
 
Posts: 1,522
 

Join Date: Jan 2010
Location: Vienna, VA - USA
Default

I bought one of those "2010 version. Thicker & beefier, this one won't break" thinking it was an upgrade for the Faifa... found out a month later going through the spare parts: https://www.readyheli.com/KSM10-T15-...r_p_36722.html

If you want it cheaper drop me a PM
__________________
Minicopter Diabolo 800+ - Minicopter Triabolo - Srimok FAIFA
Jeti DS-16
tribe3 is offline        Reply With Quote
Old 05-08-2011, 04:28 AM   #4
hookmaker
Registered Users
 
Posts: 565
 
My HF Map location
Join Date: Jun 2006
Location: Copenhagen, Denmark
Default

There´s also an alternative - for attaching a tail boom fin (horizontal) - quite a lot more material.

/henrik
__________________
Hookmaker
Kasama Srimok 90, Kasama Srimok 90E, JR Vibe 90 SG, JR Venture 90, JR Vibe 50 3D V-bar,
Bergen Intrepid Gasser, Vision-SX 90 (x 2)
MSH Protos "Monsterheli", HDX-450
hookmaker is offline        Reply With Quote
Old 05-08-2011, 08:20 AM   #5
HeliBenj
Registered Users
 
Posts: 2,724
 

Join Date: Jan 2009
Location: Provence, France
Default

I cracked one but with a boom strike that cut the boom clean off so can't really blame the part. The boom strike was a result of a crash, not the cause.
No problem with the replacement whatsoever, looks identical to me
__________________
Ben
Goblin 500 IKON w/ gov, Quantum 4115-1200, Hitec 5245, BLS251
DX8, RF6
HeliBenj is offline        Reply With Quote
Old 05-12-2011, 12:12 AM   #6
Hendo67
Registered Users
 
Posts: 226
Thread Starter Thread Starter
 

Join Date: Jun 2008
Location: Minneapolis, MN
Default

I got the HD replacement from Tribe3 today. Great guy to deal with. Thanks Pablo!

I will now have the Shrimok up for the fun fly we have this weekend. I think I have the only Shrimok in the area, so I will have a few eyes on me. Keeping my fingers crossed for a good showning.
__________________
Synergy N5c : Synergy E7 : T700
Hendo67 is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Kasama Helicopters and Upgrades


Kasama Helicopters and Upgrades Kasama Srimok 90 Helicopters and Upgrades Discussion

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2015 by RCGroups.com, LLC except where otherwise indicated. The HeliFreak.com logo is a trademark of RCGroups.com, LLC.