BEE Gone Plank! - Page 9

Birdkiller · 07-20-2011, 08:36 PM

Quote:

Originally Posted by shadow102

stupid weather has kept me inside, i have off tomorrow though so i am going to try and fly before the rain kicks up again

Oh man I know it was crazy!!
You see the videos I posted today of my V2, Nice sunny blue skies, only a couple clouds, about a hour after I those videos the storms rolled in...

JettaManDan · 07-21-2011, 07:32 AM

weather has been pretty turbulent here too...now 100+ degrees and "the worst weather i nthe country" according ot a few sources

Firefox got some love last night and is about 60% done..will finish it up this weekend...but no flying till this heat wave passes

Birdkiller · 07-21-2011, 03:12 PM

This is where Im at with the Mig build, not sure how the servos go in....I am assuming I will be cutting a hole for them. Will it be easier to wait until my clevis's, and pushrods arrive to get proper placement??

Yes know my wing support is terribly crookid.....its driving me NUTS!!! It should still do the job but i cant stand to look at it!!!

OK never mind..I cant get the picture to load.

I'll email it to Dan and have him post it!

shadow102 · 07-21-2011, 03:16 PM

bk open yourself a photobucket account, makes life much easier for posting and storing pics

JettaManDan · 07-21-2011, 03:32 PM

here is his picture...

and i use fototime..yes i pay for it..but the site is never down and easy as heck to use...4gb storage...

JettaManDan · 07-21-2011, 03:34 PM

BK..here is my Mig Pic really large for reference for you...

sorry guys for the huge size..wanted him to see my setup in detial...

Birdkiller · 07-21-2011, 04:14 PM

Awesome!! makes much more sense now!

I have a photobucket account i cant remember why but I will try that.

Birdkiller · 07-21-2011, 04:17 PM

Man!!!! That wing support is really killing me!
With my line of work everything HAS to be perfect....so this is really driving me up the wall....I would redo it if i didnt have to remake the bigest piece of the whole project...but there all glued in a everything....I cant believe I didnt notice that last night...

JettaManDan · 07-21-2011, 07:48 PM

Quote:

Originally Posted by Birdkiller

Man!!!! That wing support is really killing me!
With my line of work everything HAS to be perfect....so this is really driving me up the wall....I would redo it if i didnt have to remake the bigest piece of the whole project...but there all glued in a everything....I cant believe I didnt notice that last night...

it's totally fine man..not gonna effect how it fly's....as long as it is there you are good...tape over it to look straight

i don't even try to make mine perfect...too much time and hassle lol!

shadow102 · 07-21-2011, 07:52 PM

attempt #2 at a delta wing setup:

Birdkiller · 07-21-2011, 08:24 PM

It hard to believe that freakin thing even flies!!!

Birdkiller · 07-21-2011, 08:26 PM

Shadow, we need to make a couple "nose prop" depron planes so we can have dog fights with the streamers....

JettaManDan · 07-22-2011, 06:57 AM

Quote:

Originally Posted by Birdkiller

It hard to believe that freakin thing even flies!!!

if there is anything i've learned doing foamies..is that you can make almost anything fly lol!

Birdkiller · 07-22-2011, 09:38 AM

Yeah man I see that!

Hey Dan, not to get premature since my first build isn't done yet.

but what other plans do you have?? Do you have an Extra, or a Yak?

shadow102 · 07-22-2011, 10:00 AM

I think i will be ordering the red eagle EPP Yak-54 from hobby king today, i killed the front of my corsair last night so i am going to hang it up for a little bit until i feel like repairing it.

Cant believe how tough the PZ extra has been though, flew it last night with the 11x7 prop and that thing cuts a big ole hole in the sky at full tilt. Started really practicing landing with some touch and goes...thought i had something going really good and i managed to come down a little off to the side of the runway....some how i caught the only piece of rebar sticking up in the entire gravel area. Nail the wing and put a decent hole in the leading edge. A little fabric tape and its good as new.

Need to get the video of it uploaded its pretty interesting

JettaManDan · 07-22-2011, 10:02 AM

Quote:

Originally Posted by Birdkiller

Yeah man I see that!

Hey Dan, not to get premature since my first build isn't done yet.

but what other plans do you have?? Do you have an Extra, or a Yak?

I have tons of plans..not too many in that style though....i dislike rudder planes personally...

great resource......

http://www.rcgroups.com/forums/showthread.php?t=1333878

shadow102 · 07-22-2011, 10:27 AM

bk check this out:

http://www.hobbyking.com/hobbyking/s...arehouse_.html

Birdkiller · 07-22-2011, 04:44 PM

Quote:

Originally Posted by shadow102

I think i will be ordering the red eagle EPP Yak-54 from hobby king today, i killed the front of my corsair last night so i am going to hang it up for a little bit until i feel like repairing it.

Cant believe how tough the PZ extra has been though, flew it last night with the 11x7 prop and that thing cuts a big ole hole in the sky at full tilt. Started really practicing landing with some touch and goes...thought i had something going really good and i managed to come down a little off to the side of the runway....some how i caught the only piece of rebar sticking up in the entire gravel area. Nail the wing and put a decent hole in the leading edge. A little fabric tape and its good as new.

Need to get the video of it uploaded its pretty interesting

Yeah man, get that vid up!

Chris Arena · 07-22-2011, 11:47 PM

I ordered a DW Foamies 38" Yak 54 and the matching motor and esc. Although I got the foam for a scratch build, after looking at this as my first build, the DW Foamy, with all the carbon fibre in the wing attching hardware, and decals instructions and internet building tips seemed like the best way for me to go. I looked at a lot of kit builders and for me, (especially on the West Coast) seemed to have a pretty decent set up.

JettaManDan · 07-23-2011, 06:50 AM

That is a nice kit. Fot that type of plane a pre-fab kit is a great choice...should be a cool build and a great flying plane. Post some pics when you get it!

07-21-2011, 07:32 AM	#162
JettaManDan Registered Users Thread Starter Join Date: Mar 2010 Location: Southern Maryland	weather has been pretty turbulent here too...now 100+ degrees and "the worst weather i nthe country" according ot a few sources Firefox got some love last night and is about 60% done..will finish it up this weekend...but no flying till this heat wave passes __________________ HBV2, HBCP3, HBKING 2 FP, 4 Trex 450 Clones and a 500 Trex Clone - 22 "Planks" and 6 Cars - 27 years of R/C and counting, and it's just getting WORSE! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check me out on youtube! www.youtube.com/jettamandan09

07-21-2011, 03:12 PM	#163
Birdkiller Registered Users Join Date: Nov 2010 Location: Atlanta, Georgia	This is where Im at with the Mig build, not sure how the servos go in....I am assuming I will be cutting a hole for them. Will it be easier to wait until my clevis's, and pushrods arrive to get proper placement?? Yes know my wing support is terribly crookid.....its driving me NUTS!!! It should still do the job but i cant stand to look at it!!! OK never mind..I cant get the picture to load. I'll email it to Dan and have him post it! __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-21-2011, 03:32 PM	#165
JettaManDan Registered Users Thread Starter Join Date: Mar 2010 Location: Southern Maryland	here is his picture... and i use fototime..yes i pay for it..but the site is never down and easy as heck to use...4gb storage... Attached Thumbnails __________________ HBV2, HBCP3, HBKING 2 FP, 4 Trex 450 Clones and a 500 Trex Clone - 22 "Planks" and 6 Cars - 27 years of R/C and counting, and it's just getting WORSE! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check me out on youtube! www.youtube.com/jettamandan09

07-21-2011, 03:34 PM	#166
JettaManDan Registered Users Thread Starter Join Date: Mar 2010 Location: Southern Maryland	BK..here is my Mig Pic really large for reference for you... sorry guys for the huge size..wanted him to see my setup in detial... __________________ HBV2, HBCP3, HBKING 2 FP, 4 Trex 450 Clones and a 500 Trex Clone - 22 "Planks" and 6 Cars - 27 years of R/C and counting, and it's just getting WORSE! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check me out on youtube! www.youtube.com/jettamandan09

07-21-2011, 04:14 PM	#167
Birdkiller Registered Users Join Date: Nov 2010 Location: Atlanta, Georgia	Awesome!! makes much more sense now! I have a photobucket account i cant remember why but I will try that. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-21-2011, 03:16 PM	#164
shadow102 Registered Users My HF Map location Join Date: Mar 2011 Location: Acworth, Ga	bk open yourself a photobucket account, makes life much easier for posting and storing pics

07-21-2011, 04:17 PM	#168
Birdkiller Registered Users Join Date: Nov 2010 Location: Atlanta, Georgia	Man!!!! That wing support is really killing me! With my line of work everything HAS to be perfect....so this is really driving me up the wall....I would redo it if i didnt have to remake the bigest piece of the whole project...but there all glued in a everything....I cant believe I didnt notice that last night... __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-21-2011, 07:52 PM	#170
shadow102 Registered Users My HF Map location Join Date: Mar 2011 Location: Acworth, Ga	attempt #2 at a delta wing setup:

07-21-2011, 08:24 PM	#171
Birdkiller Registered Users Join Date: Nov 2010 Location: Atlanta, Georgia	It hard to believe that freakin thing even flies!!! __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-21-2011, 08:26 PM	#172
Birdkiller Registered Users Join Date: Nov 2010 Location: Atlanta, Georgia	Shadow, we need to make a couple "nose prop" depron planes so we can have dog fights with the streamers.... __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-22-2011, 09:38 AM	#174
Birdkiller Registered Users Join Date: Nov 2010 Location: Atlanta, Georgia	Yeah man I see that! Hey Dan, not to get premature since my first build isn't done yet. but what other plans do you have?? Do you have an Extra, or a Yak? __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

07-22-2011, 10:00 AM	#175
shadow102 Registered Users My HF Map location Join Date: Mar 2011 Location: Acworth, Ga	I think i will be ordering the red eagle EPP Yak-54 from hobby king today, i killed the front of my corsair last night so i am going to hang it up for a little bit until i feel like repairing it. Cant believe how tough the PZ extra has been though, flew it last night with the 11x7 prop and that thing cuts a big ole hole in the sky at full tilt. Started really practicing landing with some touch and goes...thought i had something going really good and i managed to come down a little off to the side of the runway....some how i caught the only piece of rebar sticking up in the entire gravel area. Nail the wing and put a decent hole in the leading edge. A little fabric tape and its good as new. Need to get the video of it uploaded its pretty interesting

07-22-2011, 10:27 AM	#177
shadow102 Registered Users My HF Map location Join Date: Mar 2011 Location: Acworth, Ga	bk check this out: http://www.hobbyking.com/hobbyking/s...arehouse_.html

07-22-2011, 11:47 PM	#179
Chris Arena Registered Users Join Date: Feb 2010 Location: Gig Harbor, WA.	I ordered a DW Foamies 38" Yak 54 and the matching motor and esc. Although I got the foam for a scratch build, after looking at this as my first build, the DW Foamy, with all the carbon fibre in the wing attching hardware, and decals instructions and internet building tips seemed like the best way for me to go. I looked at a lot of kit builders and for me, (especially on the West Coast) seemed to have a pretty decent set up.

07-23-2011, 06:50 AM	#180
JettaManDan Registered Users Thread Starter Join Date: Mar 2010 Location: Southern Maryland	That is a nice kit. Fot that type of plane a pre-fab kit is a great choice...should be a cool build and a great flying plane. Post some pics when you get it! __________________ HBV2, HBCP3, HBKING 2 FP, 4 Trex 450 Clones and a 500 Trex Clone - 22 "Planks" and 6 Cars - 27 years of R/C and counting, and it's just getting WORSE! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check me out on youtube! www.youtube.com/jettamandan09

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode