Chaos 600E Pro TT Limited Edition Super Combo - Price Reduced

Chris Sexton · 07-02-2011, 01:43 AM

SOLD SOLD SOLD

I purchased this unit as a gateway into larger heli's. I wanted to expand larger than my 500ESP but didn't have the $1,000 for the new 600E Pro 3GX that I really wanted. I did some research and reach several forums, including this one and found that amoung the "clones" the Chaos series seemed like a good value. 100% align parts compatable and local (USA anyway) suppor should I have any issues.

Well the day the kit landed I found a GREAT deal on an already decked Align 600ESP 8S that you see in my signature.

I started to build the Chaos, I was going to try the stupid stuff on the Chaos and save the Trex for when I was a better pilot, but now that my wife sees how big these darn things are, I have been asked to part with one of them. Obviously I chose to sell the Chaos 600.

Here is the link to the site I purchased from: www.scaleflying.com
Here is the link to the exact kit I purchased: http://www.scaleflying.com/Chaos-600...T9_p_1795.html

I have attached some pictures to show just how into the build I got. I am also including the Align full metal head I was going to put on this heli. The Chaos head is all metal and no one I have talked to with Chaos helis has said bad things about it, but I was given the Align head so I figured why not.

What you will get is the entire Chaos 600 Pro Super Combo kit exactly as it was shipped to me. I have already tried, if i take the main shaft off and the swashplate, I can get it back into the box without takin the frame apart. I assure you the bearing blocks have been checked, aligned and are installed with the proper amount of loctite, taking the frame apart would suck.

I paid $499.99 for this kit not 2 weeks ago. I can provide the invoice if a potential buyer would like to see it. The Align head is worth about $80 according to what others are getting on these forums. I am not trying to make money, but I am not modivated to take a bath to sell either.

JUST REDUCED FROM $500 $400 gets it all, shipped USPS CONUS only. If you want me to ship outside of US, buyer pays the shipping. I will box it up just as it was shipped to me. Most of the parts are still in their sealed plastic baggies. My price is fairly firm, with PayPal getting their 3.5% and the cost of shipping ~$25 I will be down a bit at $500.

If no one is interested in getting into a quality 600 size heli for a great price, then I will keep it. WHo knows I might finish the build one day.

Thanks!

Chris Sexton · 07-02-2011, 01:46 AM

I forgot to mention a couple of things.

What makes this the "Limited Edition" is the Carbon Fiber Tail Boom, Carbon Fiber Tail control rod, and the canopy. The standard Chaos Canopy is bright orange and black.

This kit contains everything you need to fly minus RX/TX and battery. ESC is strong and the internal BEC is rated to 6V and 5A. Most Chaos pilots fly with ESC/BEC stock, unless you are a crazy 3D pilot or want to go FBL, the stock BEC will be just fine!

Chris Sexton · 07-02-2011, 08:41 AM

Morning bump

Sent from my iPhone using Tapatalk

46&2mr · 07-02-2011, 08:48 AM

Not to hijack your thread, but I wanted to thank you for posting this. I had not heard of the chaos Heli's, If I had 500 bucks I would scoop this up. Looks like a really really good quality machine. What impresses me the most is they use the same scale alum as align (7075) quality not like other clones using the 60 aluminum.

Like I said if I had the cash I would def pick it up from ya. I just bought a brand spankin' new T-rex 450 pro so if I spend more, my old lady will kill me

Hey you get a free bumb anyways.

Chris Sexton · 07-02-2011, 09:40 AM

Thanks. It really is a nice kit. If I just had to keep it I would be sooo upset

Sent from my iPhone using Tapatalk

Chris Sexton · 07-02-2011, 04:59 PM

Bump

Sent from my iPhone using Tapatalk

Chris Sexton · 07-03-2011, 05:10 AM

Price reduced. $400 shipped for everything. CONUS only please.

chumley · 07-03-2011, 10:50 AM

I'm looking to get into a 600 and I don't think I can do better than this. PM sent.

Chris Sexton · 07-03-2011, 11:28 AM

Paypal info sent.

Sent from my iPhone using Tapatalk

chumley · 07-03-2011, 11:45 AM

Quote:

Originally Posted by cdsexton

Paypal info sent.

Sent from my iPhone using Tapatalk

Thanks cdsexton - PayPal sent

Chris Sexton · 07-03-2011, 12:10 PM

SOLD!

My wife thanks you.

Sent from my iPhone using Tapatalk

07-02-2011, 01:43 AM	#1
Chris Sexton Registered Users My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	Chaos 600E Pro TT Limited Edition Super Combo - Price Reduced SOLD SOLD SOLD I purchased this unit as a gateway into larger heli's. I wanted to expand larger than my 500ESP but didn't have the $1,000 for the new 600E Pro 3GX that I really wanted. I did some research and reach several forums, including this one and found that amoung the "clones" the Chaos series seemed like a good value. 100% align parts compatable and local (USA anyway) suppor should I have any issues. Well the day the kit landed I found a GREAT deal on an already decked Align 600ESP 8S that you see in my signature. I started to build the Chaos, I was going to try the stupid stuff on the Chaos and save the Trex for when I was a better pilot, but now that my wife sees how big these darn things are, I have been asked to part with one of them. Obviously I chose to sell the Chaos 600. Here is the link to the site I purchased from: www.scaleflying.com Here is the link to the exact kit I purchased: http://www.scaleflying.com/Chaos-600...T9_p_1795.html I have attached some pictures to show just how into the build I got. I am also including the Align full metal head I was going to put on this heli. The Chaos head is all metal and no one I have talked to with Chaos helis has said bad things about it, but I was given the Align head so I figured why not. What you will get is the entire Chaos 600 Pro Super Combo kit exactly as it was shipped to me. I have already tried, if i take the main shaft off and the swashplate, I can get it back into the box without takin the frame apart. I assure you the bearing blocks have been checked, aligned and are installed with the proper amount of loctite, taking the frame apart would suck. I paid $499.99 for this kit not 2 weeks ago. I can provide the invoice if a potential buyer would like to see it. The Align head is worth about $80 according to what others are getting on these forums. I am not trying to make money, but I am not modivated to take a bath to sell either. JUST REDUCED FROM $500 $400 gets it all, shipped USPS CONUS only. If you want me to ship outside of US, buyer pays the shipping. I will box it up just as it was shipped to me. Most of the parts are still in their sealed plastic baggies. My price is fairly firm, with PayPal getting their 3.5% and the cost of shipping ~$25 I will be down a bit at $500. If no one is interested in getting into a quality 600 size heli for a great price, then I will keep it. WHo knows I might finish the build one day. Thanks! Attached Thumbnails __________________ Team Synergy/Team Scorpion Last edited by Chris Sexton; 07-03-2011 at 12:11 PM..

07-02-2011, 01:46 AM	#2
Chris Sexton Registered Users Thread Starter My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	I forgot to mention a couple of things. What makes this the "Limited Edition" is the Carbon Fiber Tail Boom, Carbon Fiber Tail control rod, and the canopy. The standard Chaos Canopy is bright orange and black. This kit contains everything you need to fly minus RX/TX and battery. ESC is strong and the internal BEC is rated to 6V and 5A. Most Chaos pilots fly with ESC/BEC stock, unless you are a crazy 3D pilot or want to go FBL, the stock BEC will be just fine! __________________ Team Synergy/Team Scorpion

07-02-2011, 08:41 AM	#3
Chris Sexton Registered Users Thread Starter My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	Morning bump Sent from my iPhone using Tapatalk __________________ Team Synergy/Team Scorpion

07-02-2011, 08:48 AM	#4
46&2mr Registered Users Join Date: May 2011 Location: FL - Orlando	Not to hijack your thread, but I wanted to thank you for posting this. I had not heard of the chaos Heli's, If I had 500 bucks I would scoop this up. Looks like a really really good quality machine. What impresses me the most is they use the same scale alum as align (7075) quality not like other clones using the 60 aluminum. Like I said if I had the cash I would def pick it up from ya. I just bought a brand spankin' new T-rex 450 pro so if I spend more, my old lady will kill me Hey you get a free bumb anyways. __________________ Current fleet: Align T-Rex 450Pro :: Align T-Rex 250se :: Align T-Rex 100s :: Blade Mcp-X :: Blade mCX

07-02-2011, 09:40 AM	#5
Chris Sexton Registered Users Thread Starter My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	Thanks. It really is a nice kit. If I just had to keep it I would be sooo upset Sent from my iPhone using Tapatalk __________________ Team Synergy/Team Scorpion

07-02-2011, 04:59 PM	#6
Chris Sexton Registered Users Thread Starter My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	Bump Sent from my iPhone using Tapatalk __________________ Team Synergy/Team Scorpion

07-03-2011, 05:10 AM	#7
Chris Sexton Registered Users Thread Starter My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	Price reduced. $400 shipped for everything. CONUS only please. __________________ Team Synergy/Team Scorpion

07-03-2011, 10:50 AM	#8
chumley Registered Users Join Date: Mar 2011 Location: Lynn Haven, FL	I'm looking to get into a 600 and I don't think I can do better than this. PM sent.

07-03-2011, 11:28 AM	#9
Chris Sexton Registered Users Thread Starter My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	Paypal info sent. Sent from my iPhone using Tapatalk __________________ Team Synergy/Team Scorpion

07-03-2011, 12:10 PM	#11
Chris Sexton Registered Users Thread Starter My HF Map location Join Date: Feb 2011 Location: Columbus, Ohio	SOLD! My wife thanks you. Sent from my iPhone using Tapatalk __________________ Team Synergy/Team Scorpion

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode