I cant believe im even considering this.... - Page 3

Stolla · 02-08-2012, 10:22 PM

Check for robbe roxy, megapower, fusion hawk, all the same, for the bucks cant beat it, guys have run it at over 200 amp draw with 4525le motors and vbar gov, i'm using it myself costs about 100 gbp. Midlands UK had it, deduct 20 percent tax
You need a decent bec, but you need one with the castle anyway, best here is western robotics hv,

Mixmaster Pilot · 02-08-2012, 11:17 PM

Quote:

Originally Posted by Stolla

Check for robbe roxy, megapower, fusion hawk, all the same, for the bucks cant beat it, guys have run it at over 200 amp draw with 4525le motors and vbar gov, i'm using it myself costs about 100 gbp. Midlands UK had it, deduct 20 percent tax
You need a decent bec, but you need one with the castle anyway, best here is western robotics hv,

dankcincy - The original 7HV kit that Nankin offered had a 120A punch esc which is basically a rebadged robbe roxxy with heatsink, works great and as Stolla says is the same as a Fusion Hawk and Megapower. Just slight variations in end product regarding software and heatsinks. Sure it's not as good as Kontronic or YGE, but it's proven and works well with Vbar gov.

WR hercules super bec gets my vote too

dankcincy · 02-09-2012, 04:25 PM

For the price maybe Ill pick one up to try but for now it will be the CC considering my order from Nankin Hobby was waiting for me when I got home today. And if youre paying attention Yes, I just placed the order the night before last. Now thats what I call FAST!!!

dankcincy · 02-09-2012, 04:43 PM

So the set up will be as follows:
CC 120HV
Scorpion HK3 4035-560 (13T)
Jr DS8917HV On cyclic
MKS HBL980 HV On Tail
Full size V-bar Blueline 5.2
Mavrikk G5 WC 690s
KBDD 104s
RC Booya Canopy Mounts
Chrome 5000mah 35c packs
Chrome 2500mah RX pack

buzzsaw 46 · 02-09-2012, 04:53 PM

Nice!!

I was just checking my CC rewards points to see if I can sneak a 700 in. Not yet, but I'm getting close

dankcincy · 02-09-2012, 10:25 PM

If it wasnt for my winter side jobs I wouldnt be doing it. I dont think that I have to say why I dont do side work when the weather is nice.

Ah Clem · 02-10-2012, 07:03 PM

"The original 7HV kit that Nankin offered had a 120A punch esc"

I have two of these-one on the 7HV, the other on a Trex 700E.

They work very well.

Mixmaster Pilot · 02-10-2012, 09:33 PM

Ah Clem, what timing do you run? I'm running the auto timing and PWM on 16khz for my HkIII 4035-560 13t, I run straight curves in 80% 90% 100%. Not dared try anything else as timings is not my forte!

Ah Clem · 02-10-2012, 09:38 PM

Mixmaster,

It has been so long since I programmed one of these that I do not remember.

I think the timing is set to auto, but I could not swear to it.

These run cool and have a nice, proportional throttle range.

Mixmaster Pilot · 02-10-2012, 09:47 PM

Okay thanks, yeah I just set and forget as well, never had an issue either. It's only since I moved and am thinking about reassembling the 7HV that I have even thought about it.

heathy · 02-11-2012, 08:10 AM

Timing 15 or above and pwm 12khz for this esc

When i had my HW120 on the 7hv i had timing @ 18 and 12khz pwm

dankcincy · 02-12-2012, 04:19 PM

So far this is where Im at,

dunkonu23 · 02-12-2012, 04:34 PM

Looks like you're almost done, sir!

Scott

Jeff_Barrett · 02-12-2012, 05:09 PM

It's a mighty fine start!

dankcincy · 02-12-2012, 06:28 PM

dankcincy · 02-12-2012, 06:32 PM

Quote:

Originally Posted by dunkonu23

Looks like you're almost done, sir!

Scott

Nope, Still in mock up. waiting for the last few pieces of the puzzle to arrive before I tear it all down and really build it. I just slapped it together out of the box to make sure everything was there. Ok.....So I wanted to see it together, Im a dork like that.

dankcincy · 02-12-2012, 07:00 PM

Bugs are big this year,

dankcincy · 02-12-2012, 10:49 PM

Well folks, last piece of the puzzle should be in the mail tomorrow. I just ordered Chrome packs from Ready Heli to power this beast.

dunkonu23 · 02-13-2012, 03:53 AM

Quote:

Originally Posted by dankcincy

Nope, Still in mock up. waiting for the last few pieces of the puzzle to arrive before I tear it all down and really build it. I just slapped it together out of the box to make sure everything was there. Ok.....So I wanted to see it together, Im a dork like that.

Hail to dorkiness, then! I did the same thing with mine... just to see...

I've got Chromes for mine. So far after three flights, so good. I'm anxious to hear your impressions of them once you get your helicopter in the air.

Scott

dankcincy · 02-15-2012, 03:52 PM

Batteries are here,

02-09-2012, 04:25 PM	#43
dankcincy Registered Users Thread Starter My HF Map location Join Date: May 2010 Location: Cincinnati,Ohio, USA	For the price maybe Ill pick one up to try but for now it will be the CC considering my order from Nankin Hobby was waiting for me when I got home today. And if youre paying attention Yes, I just placed the order the night before last. Now thats what I call FAST!!! __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ):> Compass 7HV, Atom 500 "Some men just want to watch the world burn"

02-09-2012, 04:43 PM	#44
dankcincy Registered Users Thread Starter My HF Map location Join Date: May 2010 Location: Cincinnati,Ohio, USA	So the set up will be as follows: CC 120HV Scorpion HK3 4035-560 (13T) Jr DS8917HV On cyclic MKS HBL980 HV On Tail Full size V-bar Blueline 5.2 Mavrikk G5 WC 690s KBDD 104s RC Booya Canopy Mounts Chrome 5000mah 35c packs Chrome 2500mah RX pack __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ):> Compass 7HV, Atom 500 "Some men just want to watch the world burn" Last edited by dankcincy; 02-12-2012 at 10:53 PM..

02-09-2012, 04:53 PM	#45
buzzsaw 46 Registered Users My HF Map location Join Date: Oct 2005 Location: SE MN	Nice!! I was just checking my CC rewards points to see if I can sneak a 700 in. Not yet, but I'm getting close __________________ Compass 6hv & 7hv. MSH Protos. RCer Dragonus Pro & Elite. MS Hornet Custom. Robbe Eolo. MCPX.

02-09-2012, 10:25 PM	#46
dankcincy Registered Users Thread Starter My HF Map location Join Date: May 2010 Location: Cincinnati,Ohio, USA	If it wasnt for my winter side jobs I wouldnt be doing it. I dont think that I have to say why I dont do side work when the weather is nice. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ):> Compass 7HV, Atom 500 "Some men just want to watch the world burn"

02-10-2012, 07:03 PM	#47
Ah Clem Registered Users Join Date: Jan 2006 Location: Alhambra, CA	"The original 7HV kit that Nankin offered had a 120A punch esc" I have two of these-one on the 7HV, the other on a Trex 700E. They work very well. __________________ KBDD-Team Pilot Team Compass / ProStar Hobby Gens Ace Field Representative Warp 360, 7HV,Knight Pro,Knight 3D, Atom 500, Odin II, 6HV, 3D Plus, Knight 50

02-08-2012, 10:22 PM	#41
Stolla Registered Users Join Date: Jul 2009 Location: Port Elizabeth South Africa	Check for robbe roxy, megapower, fusion hawk, all the same, for the bucks cant beat it, guys have run it at over 200 amp draw with 4525le motors and vbar gov, i'm using it myself costs about 100 gbp. Midlands UK had it, deduct 20 percent tax You need a decent bec, but you need one with the castle anyway, best here is western robotics hv,

02-10-2012, 09:33 PM	#48
Mixmaster Pilot Registered Users Join Date: Aug 2010 Location: Melbourne, Australia	Ah Clem, what timing do you run? I'm running the auto timing and PWM on 16khz for my HkIII 4035-560 13t, I run straight curves in 80% 90% 100%. Not dared try anything else as timings is not my forte! __________________ Compass Atom 7HV, Scorp HK3 4035 hand wound by Mauro - 6x7x1.32 YY 430KV, CGY750 Beam E4, 6S, looking for a new FBL unit, BX is getting removed! Formerly owned - Blade mCP X V2 - Blade 400 FBL BeastX

02-10-2012, 09:38 PM	#49
Ah Clem Registered Users Join Date: Jan 2006 Location: Alhambra, CA	Mixmaster, It has been so long since I programmed one of these that I do not remember. I think the timing is set to auto, but I could not swear to it. These run cool and have a nice, proportional throttle range. __________________ KBDD-Team Pilot Team Compass / ProStar Hobby Gens Ace Field Representative Warp 360, 7HV,Knight Pro,Knight 3D, Atom 500, Odin II, 6HV, 3D Plus, Knight 50

02-10-2012, 09:47 PM	#50
Mixmaster Pilot Registered Users Join Date: Aug 2010 Location: Melbourne, Australia	Okay thanks, yeah I just set and forget as well, never had an issue either. It's only since I moved and am thinking about reassembling the 7HV that I have even thought about it. __________________ Compass Atom 7HV, Scorp HK3 4035 hand wound by Mauro - 6x7x1.32 YY 430KV, CGY750 Beam E4, 6S, looking for a new FBL unit, BX is getting removed! Formerly owned - Blade mCP X V2 - Blade 400 FBL BeastX

02-11-2012, 08:10 AM	#51
heathy Registered Users Join Date: Apr 2010 Location: Wiltshire England	Timing 15 or above and pwm 12khz for this esc When i had my HW120 on the 7hv i had timing @ 18 and 12khz pwm __________________ X2 SK720 MINIJAZZ 20 / WARP 360 SK540 KOBY55 / LOGO 550SX SK540 HELIJIVE 120 / 7HV SK540 YGE160k / 7HV SK720 YGE 120k / TDR SK540 POWERJIVE 120 / X7 SK540 HELIJIVE 120/ Futaba18mz / Skookum support rep

02-12-2012, 04:19 PM	#52
dankcincy Registered Users Thread Starter My HF Map location Join Date: May 2010 Location: Cincinnati,Ohio, USA	So far this is where Im at, __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ):> Compass 7HV, Atom 500 "Some men just want to watch the world burn" Last edited by dankcincy; 02-17-2012 at 04:01 PM..

02-12-2012, 04:34 PM	#53
dunkonu23 Registered Users Join Date: Jan 2009 Location: Michigan, East of Hell	Looks like you're almost done, sir! Scott __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Spartan Vortex VX1 Inside Team A Main Hobbies/ProTek Field Rep ):>

02-12-2012, 05:09 PM	#54
Jeff_Barrett Registered Users Join Date: Aug 2010 Location: Manitoba, Canada	It's a mighty fine start! __________________ Owner - RCHeliCanada.com Compass \|\| Gaui \|\| Synergy \|\| Walkera \|\| DJI \|\| Skookum Robotics \|\| TracX \|\| Bavarian Demon \|\| MKS Servo

02-12-2012, 06:28 PM	#55
dankcincy Registered Users Thread Starter My HF Map location Join Date: May 2010 Location: Cincinnati,Ohio, USA	__________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ):> Compass 7HV, Atom 500 "Some men just want to watch the world burn"

02-12-2012, 07:00 PM	#57
dankcincy Registered Users Thread Starter My HF Map location Join Date: May 2010 Location: Cincinnati,Ohio, USA	Bugs are big this year, __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ):> Compass 7HV, Atom 500 "Some men just want to watch the world burn" Last edited by dankcincy; 02-12-2012 at 08:35 PM..

02-12-2012, 10:49 PM	#58
dankcincy Registered Users Thread Starter My HF Map location Join Date: May 2010 Location: Cincinnati,Ohio, USA	Well folks, last piece of the puzzle should be in the mail tomorrow. I just ordered Chrome packs from Ready Heli to power this beast. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ):> Compass 7HV, Atom 500 "Some men just want to watch the world burn"

02-15-2012, 03:52 PM	#60
dankcincy Registered Users Thread Starter My HF Map location Join Date: May 2010 Location: Cincinnati,Ohio, USA	Batteries are here, __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ):> Compass 7HV, Atom 500 "Some men just want to watch the world burn"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode