RJX Head or the Align FBL Head on the Trex 450 Pro

Raydee · 10-07-2011, 04:59 PM

Is there any advantage using the RJX over the Align head or is the Align Head preferred?

Spork01 · 10-07-2011, 10:13 PM

The geometry is a little better on the rjx head in my opinion. I had the rjx head on my v1 and sold it when I bought the align pro v2. i regret that decision . the align is good but I like the rjx much better.

Raydee · 10-07-2011, 11:12 PM

Besides the FBL head is there any advantage to gettting the V2 Pro over the V1 Pro?

heliphlier · 10-08-2011, 06:51 AM

As far as I know the only difference is in the frame. There is a plate added to the V2 frame for the flybarless electronics to sit on and the elevator servo is able to be mounted on the outside of the frame as there is a cut out for the bottom servo tab. On the V1 you have to mount it from the inside and is a pain. Other than that I don't think there are any other differences besides the head but i could be mistaken. If any one else knows hopefully they will chime in and make a note of it.

10-07-2011, 04:59 PM	#1
Raydee Registered Users My HF Map location Join Date: Dec 2006 Location: Buffalo, NY	RJX Head or the Align FBL Head on the Trex 450 Pro Is there any advantage using the RJX over the Align head or is the Align Head preferred? __________________ Logo 500se VBar Pro 5.3 Align Trex 700 DFC HV Vbar Pro 5.3 Align Trex 500 EFL Pro Mini Vbar 5.3 Outrage Fusion 50 6s Vbar Pro 5.3

10-07-2011, 10:13 PM	#2
Spork01 Registered Users Join Date: Mar 2008 Location: Orlando, FL	The geometry is a little better on the rjx head in my opinion. I had the rjx head on my v1 and sold it when I bought the align pro v2. i regret that decision . the align is good but I like the rjx much better. __________________ Trex 450 Pro V2 FB spartan quark trex 250 beastx Fusion 50 beastX

10-07-2011, 11:12 PM	#3
Raydee Registered Users Thread Starter My HF Map location Join Date: Dec 2006 Location: Buffalo, NY	Besides the FBL head is there any advantage to gettting the V2 Pro over the V1 Pro? __________________ Logo 500se VBar Pro 5.3 Align Trex 700 DFC HV Vbar Pro 5.3 Align Trex 500 EFL Pro Mini Vbar 5.3 Outrage Fusion 50 6s Vbar Pro 5.3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-08-2011, 06:51 AM	#4
heliphlier Registered Users Join Date: May 2010 Location: ohio	As far as I know the only difference is in the frame. There is a plate added to the V2 frame for the flybarless electronics to sit on and the elevator servo is able to be mounted on the outside of the frame as there is a cut out for the bottom servo tab. On the V1 you have to mount it from the inside and is a pain. Other than that I don't think there are any other differences besides the head but i could be mistaken. If any one else knows hopefully they will chime in and make a note of it.