Goblin helicopters technical support thread - Page 7

Yoda DK · 11-17-2011, 03:34 AM

Quote:

Originally Posted by goblinhelicopter

Hi,

The first stage of the transmission Goblin is a belt. This has the great advantage that there are not temperature problems. The belt used by us are OK up to 130 °.

The belt combined with the rigidity of the motor support of the Goblin does not necessitate the 3 rd bearing on shaft motor.
The shaft of the motor must be at least 26 mm.

Goblin Helicopters.

i could be wrong but. looks like the Kontronik pyro 700-520 L can't be used then. found a sheet and it says shaft is only 23.5mm long

geekindenial · 11-17-2011, 04:36 AM

Do you guys think Futaba BLS 253 @6V is strong enough for the goblin on cyclic if no extreme 3d is planned? BTW put my pre order in today for second batch, very excited.

Magneto · 11-17-2011, 07:37 AM

253s will be fine for 3d.There Great servos !

Dumbthumb75 · 11-17-2011, 09:00 AM

Quote:

Originally Posted by Yoda DK

i could be wrong but. looks like the Kontronik pyro 700-520 L can't be used then. found a sheet and it says shaft is only 23.5mm long

You are wrong...

It's the short Pyro 700 that's 23,5mm. The long one is 38,5mm.

Colonny5 · 11-18-2011, 10:13 AM

What color is the second batch going to be? When are different colored kits going to be offered?

McCollister911 · 11-18-2011, 10:59 AM

I would be great to have options for the second batch. I'd like that white one with the checked top area. Question. When ordering from HD is the free name customization still valid for the second batch? If so is it on the canopy or the blades like Berts? When do they ask this during checkout. Or do I put it in the notes box

scoti333 · 11-18-2011, 12:59 PM

I think it's past the deadline for the names..

McCollister911 · 11-18-2011, 04:00 PM

Well I made the order a few hrs ago. I added in the notes what I hope to get on the canopy/blades and the customer service rep replied that he sent in the request. We will see if I made it or not

jhunter · 11-18-2011, 04:24 PM

I guess you are in the 2nd batch anyway so it might happen.

Yoda DK · 11-19-2011, 01:39 AM

Quote:

Originally Posted by Dumbthumb75

You are wrong...

It's the short Pyro 700 that's 23,5mm. The long one is 38,5mm.

great thanks

ragge1 · 11-19-2011, 03:43 AM

just wondering if we gonna se this Kit with a motor and ESC included

jhheli · 11-19-2011, 05:58 AM

Quote:

Originally Posted by ragge1

just wondering if we gonna se this Kit with a motor and ESC included

No

worldofmaya · 11-19-2011, 01:59 PM

Where do you guys @ SAB see the benefit of GT belts?
-Klaus

jhheli · 11-19-2011, 08:32 PM

Quote:

Originally Posted by worldofmaya

Where do you guys @ SAB see the benefit of GT belts?
-Klaus

Gt belts? What do you meanl

worldofmaya · 11-20-2011, 12:32 AM

Motor belt 240-3MGT-09 and 2061-3GT-06 for the tail, both with GT pitch... as written a question for the SAB / Goblin rep.
-Klaus

goblinhelicopter · 11-20-2011, 03:16 AM

I attack the features of the GT3 belts:

http://www.gates.com/europe/brochure...ation_id=14795

worldofmaya · 11-20-2011, 04:10 AM

Interesting... thanks

-klaus

geekindenial · 11-21-2011, 02:33 AM

I wonder if SAB has tried with any of the Scorpion HK-50 series motor at all?

Thunder Fighter · 11-21-2011, 05:11 AM

I have a HK-5020 ready for mine, looks like it will fit no problem, would be good to know if they have tried it.

//Dennis.

Twister773 · 11-22-2011, 10:41 PM

I don't recall seeing this answered...is there an anti-static kit supplied like there is with the Logo's? If not, how does it get grounded?

11-17-2011, 07:37 AM	#123
Magneto Registered Users Join Date: Jan 2010 Location: Massachusetts	253s will be fine for 3d.There Great servos ! __________________ Team To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. USA Team Minicopter To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. www.peakaircraft.com

11-18-2011, 10:13 AM	#125
Colonny5 Registered Users Join Date: May 2010 Location: Florida	What color is the second batch going to be? When are different colored kits going to be offered? __________________ Lynx Team Pilot

11-18-2011, 12:59 PM	#127
scoti333 Registered Users Join Date: Apr 2010 Location: austin,TX	I think it's past the deadline for the names.. __________________ -Goblin 700: Crashed but re-building, still needing electronics To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. -Goblin 630: CC Ice 120HV, vBar

11-18-2011, 04:24 PM	#129
jhunter Registered Users Join Date: Oct 2009 Location: Richmond Va USA	The deadline was the 9th I guess you are in the 2nd batch anyway so it might happen. __________________ TDR, Srimok N x 2, Banshee 31, avant aurora, Dune!

11-19-2011, 03:43 AM	#131
ragge1 Registered Users Join Date: Aug 2009 Location: Norway , from Sweden	just wondering if we gonna se this Kit with a motor and ESC included __________________ Trex 500 : Atom FBL head AR7200BX \| Atom 6HV : vbar 5,3 pro \| Goblin 700 : vbar 5,3 pro \| Goblin 500 : vbar 5,3 pro

11-17-2011, 04:36 AM	#122
geekindenial Registered Users Join Date: Jan 2008	Do you guys think Futaba BLS 253 @6V is strong enough for the goblin on cyclic if no extreme 3d is planned? BTW put my pre order in today for second batch, very excited.

11-18-2011, 10:59 AM	#126
McCollister911 Registered Users Join Date: Mar 2011 Location: Bossier City LA	I would be great to have options for the second batch. I'd like that white one with the checked top area. Question. When ordering from HD is the free name customization still valid for the second batch? If so is it on the canopy or the blades like Berts? When do they ask this during checkout. Or do I put it in the notes box

11-18-2011, 04:00 PM	#128
McCollister911 Registered Users Join Date: Mar 2011 Location: Bossier City LA	Well I made the order a few hrs ago. I added in the notes what I hope to get on the canopy/blades and the customer service rep replied that he sent in the request. We will see if I made it or not

11-19-2011, 01:59 PM	#133
worldofmaya Registered Users My HF Map location Join Date: Jun 2007 Location: Graz, Austria	Where do you guys @ SAB see the benefit of GT belts? -Klaus __________________ SuziLAOS-DNHP-CenturioMax-Protos500-DJI-F550

11-20-2011, 12:32 AM	#135
worldofmaya Registered Users My HF Map location Join Date: Jun 2007 Location: Graz, Austria	Motor belt 240-3MGT-09 and 2061-3GT-06 for the tail, both with GT pitch... as written a question for the SAB / Goblin rep. -Klaus __________________ SuziLAOS-DNHP-CenturioMax-Protos500-DJI-F550

11-20-2011, 03:16 AM	#136
goblinhelicopter Registered Users Thread Starter Join Date: Oct 2011 Location: www.goblin-helicopter.com	I attack the features of the GT3 belts: http://www.gates.com/europe/brochure...ation_id=14795 Attached Thumbnails __________________ Goblin Helicopters

11-20-2011, 04:10 AM	#137
worldofmaya Registered Users My HF Map location Join Date: Jun 2007 Location: Graz, Austria	Interesting... thanks -klaus __________________ SuziLAOS-DNHP-CenturioMax-Protos500-DJI-F550

11-21-2011, 02:33 AM	#138
geekindenial Registered Users Join Date: Jan 2008	I wonder if SAB has tried with any of the Scorpion HK-50 series motor at all?

11-21-2011, 05:11 AM	#139
Thunder Fighter Registered Users Join Date: Jul 2007 Location: Melbourne Oz	I have a HK-5020 ready for mine, looks like it will fit no problem, would be good to know if they have tried it. //Dennis. __________________ Mini Protos FBL Stretch - 4s MSH Brain : Protos FBL Stretch - SK-720 : Protos FBL Stretch Night flyer SK-720 SAB Goblin 500 Ikon : Logo 600 FBL V-bar, 10s : SAB Goblin 700 Vbar, HK5020, Hawk 120A

11-22-2011, 10:41 PM	#140
Twister773 Registered Users Join Date: Oct 2009 Location: SLO, California	I don't recall seeing this answered...is there an anti-static kit supplied like there is with the Logo's? If not, how does it get grounded? __________________ Nikon D4/Coming Soon/Cinestar 8/8FG super

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode