Miniature Aircraft Xcell Gas MA1005 (Crashed) Make offer

Low Fly By · 01-13-2012, 09:48 PM

Hey, I Have this MA1005 Gasser that I've owned since new. I haven't flown it in 8 years and recently decided to fix it up and give it a shot. I installed a new Walbro carburetor and a Futaba GY401. I picked it up into a hover and after about 10 seconds it started violently shaking and within 2 seconds it was in pieces. From what I can see it needs both upper frames, tail boom, torque tube, tail boom supports, main gear (which I have spare) and probably a couple other little things. Anyways, I have no motivation to fix it again and work out its issue, so I just want to sell it. I realize its not worth much like this, therefor just make an offer (realistic one please).Besides the collective servo which is a JR ds8411 all the servos are bottom end old Jr's. I removed the rudder servo because that was also part of my recent investment into it and I could use it on another helicopter. Feel free to ask any questions.

traderdave2 · 01-14-2012, 08:24 AM

What motor.

Harlan

Low Fly By · 01-14-2012, 09:25 AM

It's got a Zenoah G230.

Low Fly By · 02-29-2012, 10:31 PM

Just found brand new carbon blades for the helicopter so they are part of the deal as well.

Low Fly By · 03-23-2012, 02:28 PM

$250 shipped anywhere in the contiguous u.s.

gendoc · 03-23-2012, 04:44 PM

PM Sent

Gendoc

gendoc · 03-24-2012, 10:17 AM

Payment sent

Thanks,

Gendoc

gendoc · 03-30-2012, 04:20 PM

Just got it today

Thanks,

Gendoc

01-13-2012, 09:48 PM	#1
Low Fly By Registered Users Join Date: Jan 2012 Location: Florida	Miniature Aircraft Xcell Gas MA1005 (Crashed) Make offer Hey, I Have this MA1005 Gasser that I've owned since new. I haven't flown it in 8 years and recently decided to fix it up and give it a shot. I installed a new Walbro carburetor and a Futaba GY401. I picked it up into a hover and after about 10 seconds it started violently shaking and within 2 seconds it was in pieces. From what I can see it needs both upper frames, tail boom, torque tube, tail boom supports, main gear (which I have spare) and probably a couple other little things. Anyways, I have no motivation to fix it again and work out its issue, so I just want to sell it. I realize its not worth much like this, therefor just make an offer (realistic one please).Besides the collective servo which is a JR ds8411 all the servos are bottom end old Jr's. I removed the rudder servo because that was also part of my recent investment into it and I could use it on another helicopter. Feel free to ask any questions. Attached Thumbnails

03-23-2012, 04:44 PM	#6
gendoc Registered Users Join Date: Nov 2011 Location: delmar de	MA 1005 PM Sent Gendoc

03-24-2012, 10:17 AM	#7
gendoc Registered Users Join Date: Nov 2011 Location: delmar de	Payment Sent Payment sent Thanks, Gendoc

03-30-2012, 04:20 PM	#8
gendoc Registered Users Join Date: Nov 2011 Location: delmar de	MA1005 Just got it today Thanks, Gendoc

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-14-2012, 08:24 AM	#2
traderdave2 Registered Users Join Date: Dec 2004 Location: Covington GA	What motor. Harlan

01-14-2012, 09:25 AM	#3
Low Fly By Registered Users Thread Starter Join Date: Jan 2012 Location: Florida	It's got a Zenoah G230.

02-29-2012, 10:31 PM	#4
Low Fly By Registered Users Thread Starter Join Date: Jan 2012 Location: Florida	Just found brand new carbon blades for the helicopter so they are part of the deal as well.

03-23-2012, 02:28 PM	#5
Low Fly By Registered Users Thread Starter Join Date: Jan 2012 Location: Florida	$250 shipped anywhere in the contiguous u.s.