Futaba BLS 256HV (FUTM0758) Gear Sets

Victor · 01-21-2012, 04:04 PM

Anyone selling gear sets for these yet?

Just stripped mine today. Can't find any online. Sup with dat?

Victor

kcordell · 01-22-2012, 07:36 AM

First, the part number you reference is for the BLS255HV servo.
Second, these servos are so new into the US that gear sets probably aren't here yet. If you can't ever find anything on Tower's website, they aren't in country yet as Great Planes (Tower Hobbies) is the importer for the US market.

You could try calling the service center to see if they may have some.

Victor · 01-22-2012, 02:42 PM

Kcordell, you are correct. I screwed up and put the 255 part number in there. Sorry about that.

I didn't know that about Tower Hobby being the US importer. I'll check with them first. If they don't have it, I'll call the Service Centre.

Good info, thanks.

kcordell · 01-22-2012, 06:30 PM

Well, really its Great Planes/Hobbico that is the US importer for Futaba. Great Planes also owns Tower Hobbies.
Just for information.

dchekas · 01-22-2012, 09:22 PM

The BLS256HV doesn't share the same gears as the BLS251?

krysta · 01-23-2012, 09:13 AM

The BLS256HV shares the same gear set as the BLS251 and S9251.

You could purchase FUTM3443 SERVO GEAR SET S9251 or you can contact the Futaba Support department and order the individual gear your are needing:

HSP73831 1ST GEAR S9253
HSP73817 2ND GEAR S9253
HSP73815 3RD GEAR S9253
HSP78384 FINAL GEAR ASSY S9350

Sincerely,
Krysta
Product Development & Support Specialist
Futaba Service Center USA
service@futaba-rc.com

Jeff Polisena · 07-02-2012, 04:17 PM

http://www.readyheli.com/FUTM3502-Fu...6_p_32848.html

I keep spares ,the metal gear never strips so all my tail servo use the same 1st,2nd and 3rd gears

01-21-2012, 04:04 PM	#1
Victor Registered Users Join Date: Jan 2008	Futaba BLS 256HV (FUTM0758) Gear Sets Anyone selling gear sets for these yet? Just stripped mine today. Can't find any online. Sup with dat? Victor

01-22-2012, 07:36 AM	#2
kcordell Registered Users Join Date: Aug 2006 Location: St. Louis, Missouri	First, the part number you reference is for the BLS255HV servo. Second, these servos are so new into the US that gear sets probably aren't here yet. If you can't ever find anything on Tower's website, they aren't in country yet as Great Planes (Tower Hobbies) is the importer for the US market. You could try calling the service center to see if they may have some. __________________ Team Futaba, Team Miniature Aircraft, Team Flightpower, Radix Blades, VelTye, YS Engines

01-22-2012, 06:30 PM	#4
kcordell Registered Users Join Date: Aug 2006 Location: St. Louis, Missouri	Well, really its Great Planes/Hobbico that is the US importer for Futaba. Great Planes also owns Tower Hobbies. Just for information. __________________ Team Futaba, Team Miniature Aircraft, Team Flightpower, Radix Blades, VelTye, YS Engines

01-22-2012, 09:22 PM	#5
dchekas Registered Users My HF Map location Join Date: Sep 2006 Location: Connecticut	The BLS256HV doesn't share the same gears as the BLS251? __________________ Team Miniature Aircraft USA Team HeliWholesaler, Team Byron Fuel's, Team Thunder Power, Team Scorpion -Darrick

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-22-2012, 02:42 PM	#3
Victor Registered Users Thread Starter Join Date: Jan 2008	Kcordell, you are correct. I screwed up and put the 255 part number in there. Sorry about that. I didn't know that about Tower Hobby being the US importer. I'll check with them first. If they don't have it, I'll call the Service Centre. Good info, thanks.

01-23-2012, 09:13 AM	#6
krysta Registered Users Join Date: Jan 2006 Location: Illinois	The BLS256HV shares the same gear set as the BLS251 and S9251. You could purchase FUTM3443 SERVO GEAR SET S9251 or you can contact the Futaba Support department and order the individual gear your are needing: HSP73831 1ST GEAR S9253 HSP73817 2ND GEAR S9253 HSP73815 3RD GEAR S9253 HSP78384 FINAL GEAR ASSY S9350 Sincerely, Krysta Product Development & Support Specialist Futaba Service Center USA service@futaba-rc.com

07-02-2012, 04:17 PM	#7
Jeff Polisena Registered Users Join Date: Jan 2011 Location: Florida	http://www.readyheli.com/FUTM3502-Fu...6_p_32848.html I keep spares ,the metal gear never strips so all my tail servo use the same 1st,2nd and 3rd gears